SPECpower_ssj2008 Copyright (C) 2007-2022 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL385 Gen11 SPECpower_ssj2008 = 22,881 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Oct 25, 2022 Publication: Nov 10, 2022 Hardware Availability: Dec-2022 Software Availability: Dec-2022 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.4% | 20,119,490 | 679 | 29,645 90% | 90.0% | 18,217,362 | 645 | 28,239 80% | 80.0% | 16,187,806 | 599 | 27,015 70% | 70.1% | 14,174,274 | 532 | 26,621 60% | 60.0% | 12,132,438 | 486 | 24,989 50% | 50.0% | 10,119,279 | 446 | 22,707 40% | 40.0% | 8,098,007 | 406 | 19,963 30% | 30.0% | 6,071,780 | 363 | 16,734 20% | 20.0% | 4,043,355 | 317 | 12,758 10% | 10.0% | 2,022,186 | 266 | 7,601 Active Idle | 0 | 121 | 0 sum of ssj_ops / sum of power = | 22,881 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL385 Gen11 Form Factor: 2U CPU Name: AMD EPYC 9654 2.40 GHz CPU Characteristics: 96-Core, 2.40 GHz, 384MB L3 Cache CPU Frequency (MHz): 2400 CPU(s) Enabled: 192 cores, 2 chips, 96 cores/chip Hardware Threads: 384 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 384 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 384 # and size of DIMM: 24 x 16384 MB Memory Details: 16 GB 1Rx8 PC5-4800B-R; all DIMM slots populated on each socket Power Supply Quantity and Rating 1 x 1000 (W): Power Supply Details: HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (P03178-B21) Disk Drive: 1 x HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD (P40497-B21) Disk Controller: Embedded SATA Controller # and type of Network Interface 1 x HPE 1GbE 4p BASE-T I350-T4 OCP3 Adapter Cards (NICs) Installed: (P08449-B21) NICs Enabled in Firmware / OS / 4/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2019 Datacenter OS Version: Version 1809 (OS Build 17763.3532) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM (build 17.0.2+8-LTS-86, mixed mode, sharing) JVM Command-line Options: -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap JVM Affinity: start /NODE [0-23] /AFFINITY [0xF,0xF0,0xF00,0xF000] JVM Instances: 96 JVM Initial Heap (MB): 1500 JVM Maximum Heap (MB): 1500 JVM Address Bits: 64 Boot Firmware Version: A55 v1.10 (10/14/2022) Management Firmware Version: 1.10 Oct 09 2022 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: KB5018419, HPE ProLiant Agentless Management Service for Windows X64 Boot Firmware Settings BIOS Platform Configuration (RBSU): * BIOS Serial Console Port: Disabled * USB Support: All USB Ports Enabled * Maximum Memory Bus Frequency: 3600 MHz * DRAM Controller Power Down: Enabled * NUMA memory domains per socket: Four memory domains per socket * Last-Level Cache (LLC) As NUMA Node: Enabled * SR-IOV: Disabled * Data Fabric C-State Enable: Force Enabled * AMD Fmax Boost Limit Control: Manual * AMD Fmax Boost Limit: 2600 * XGMI Force Link Width: x4 * XGMI Max Link Width: x4 * AMD xGMI Link Speed: 16 Gbps * NUMA Group Size Optimization: Clustered * L2 Stream HW Prefetcher: Disabled * Infinity Fabric Power Management: Disabled * Infinity Fabric Performance State: P3 * Maximum PCI Express Speed: PCIe Generation 1.0 * Ethernet Network Adapter -> PCIe Link Speed: PCIe Generation 1.0 * Ethernet Network Adapter -> PCIe Power Management(ASPM): L1 Enabled Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via Windows Remote Desktop Connection * SPECpower_ssj.props input.load_level.number_warehouses set to 384 due to a known inconsistency in processor reporting with this Java version * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark * OS Tunes: * Windows Power Options= Power Saver * Turn Off Dispay = 1 Minute * Turn off Hard Disk = 1 Minute * Minimum Processor State=0% * powercfg properties: * Powercfg /setacvalueindex scheme_current sub_processor PROCTHROTTLEMIN 0 * Powercfg /setacvalueindex scheme_current sub_processor PROCTHROTTLEMAX 100 * Powercfg /setacvalueindex scheme_current sub_processor PERFEPP 100 * Powercfg /setacvalueindex scheme_current sub_processor perfautonomous 1 * Powercfg /setactive scheme_current * The system ROM used for this result contains AMD AGESA version 0E11100A00000000 for the AMD EPYC 9654 processor Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_241-b07 (build 25.241-b07, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB53024 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-GU3Q4-100-1 Date of Calibration: 14-Jun-2022 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.2-3976349f-20201208 Setup Description: SUT Power Supply 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 679 | 20.6 90% | 645 | 21.3 80% | 599 | 22.1 70% | 532 | 21.5 60% | 486 | 22.6 50% | 446 | 23.7 40% | 406 | 23.5 30% | 363 | 24.0 20% | 317 | 24.6 10% | 266 | 24.0 Active Idle | 121 | 24.1 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 20.6 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20221025-01189-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 20,846,553 Calibration 2 | | | 20,248,456 Calibration 3 | | | 20,218,713 ssj_ops@calibrated=20,233,584 100% | 99.4% | 20,233,584 | 20,119,490 90% | 90.0% | 18,210,226 | 18,217,362 80% | 80.0% | 16,186,867 | 16,187,806 70% | 70.1% | 14,163,509 | 14,174,274 60% | 60.0% | 12,140,151 | 12,132,438 50% | 50.0% | 10,116,792 | 10,119,279 40% | 40.0% | 8,093,434 | 8,098,007 30% | 30.0% | 6,070,075 | 6,071,780 20% | 20.0% | 4,046,717 | 4,043,355 10% | 10.0% | 2,023,358 | 2,022,186 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20221025-01189.SUT-13.txt) for additional details. Copyright (C) 2007-2022 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]