| Fujitsu FUJITSU Server PRIMERGY TX1310 M5 (D3930-A100) | SPECpower_ssj2008 = 9,596 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
| Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Oct 12, 2021 |
| Hardware Availability: | Nov-2021 | Software Availability: | Oct-2020 | Publication: | Oct 28, 2021 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.8% | 655,851 | 55.5 | 11,820 |
| 90% | 90.1% | 592,085 | 50.7 | 11,678 |
| 80% | 80.3% | 527,825 | 46.7 | 11,307 |
| 70% | 69.8% | 458,749 | 42.6 | 10,781 |
| 60% | 59.9% | 393,649 | 38.8 | 10,141 |
| 50% | 50.3% | 330,983 | 35.1 | 9,417 |
| 40% | 39.8% | 261,615 | 30.8 | 8,495 |
| 30% | 30.0% | 197,353 | 26.4 | 7,476 |
| 20% | 20.0% | 131,573 | 21.7 | 6,065 |
| 10% | 10.1% | 66,392 | 16.9 | 3,930 |
| Active Idle | 0 | 11.7 | 0 | |
| ∑ssj_ops / ∑power = | 9,596 | |||
| Set Identifier: | TX1310M5 |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | Single Node |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | FUJITSU Server PRIMERGY TX1310 M5 (D3930-A100) |
| Form Factor: | Tower |
| CPU Name: | Intel Xeon E-2356G |
| CPU Characteristics: | 6-Core, 3.2GHz, 12MB L3 Cache |
| CPU Frequency (MHz): | 3200 |
| CPU(s) Enabled: | 6 cores, 1 chip, 6 cores/chip |
| Hardware Threads: | 12 (2 / core) |
| CPU(s) Orderable: | 1 chips |
| Primary Cache: | 32 KB I + 48 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 12 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 2 x 8196 MB |
| Memory Details: | 2 x 8 GB 1Rx8 PC4-3200AA-ED2-11; slots 1A, 1B populated |
| Power Supply Quantity and Rating (W): | 1 x 250 |
| Power Supply Details: | S26113-E591-V70-01 |
| Disk Drive: | 1 x SSD M.2 240GB, S26361-F5787-E240 |
| Disk Controller: | Integrated SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Network Connection (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Balanced |
| Operating System (OS): | Windows Server 2019 Standard |
| OS Version: | version1809, build 17763.107 |
| Filesystem: | ntfs |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.9+7-LTS, mixed mode) |
| JVM Command-line Options: | -server -Xmn10500m -Xms12000m -Xmx12000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes |
| JVM Affinity: | none |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 12000 |
| JVM Maximum Heap (MB): | 12000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | R1.4.0 |
| Management Firmware Version: | v3.06 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | KB4464455 |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY RX2530 M2 |
| CPU Description: | Intel Xeon E5-2643 v4 |
| Memory amount (GB): | 64 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2012 R2 Standard |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Hioki |
| Model: | PW3336 |
| Serial Number: | 170134584 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NICT (National Institute of Information and Communications Technology) |
| Accredited by: | HIOKI E.E. CORPORATION |
| Calibration Label: | H06400087-2103 |
| Date of Calibration: | 08-Mar-2021 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.2-3976349f-20201208 |
| Setup Description: | Connected to PSU 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 55.5 | 20.8 |
| 90% | 50.7 | 20.8 |
| 80% | 46.7 | 20.8 |
| 70% | 42.6 | 20.9 |
| 60% | 38.8 | 20.9 |
| 50% | 35.1 | 21.2 |
| 40% | 30.8 | 21.4 |
| 30% | 26.4 | 21.6 |
| 20% | 21.7 | 21.6 |
| 10% | 16.9 | 21.6 |
| Active Idle | 11.7 | 21.8 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 200V / 50 Hz / 1 phase / 2 wires | 20.8 | 11 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 658,739 | ||
| Calibration 2 | 658,121 | ||
| Calibration 3 | 656,640 | ||
| ssj_ops@calibrated=657,380 | |||
| 100% | 99.8% | 657,380 | 655,851 |
| 90% | 90.1% | 591,642 | 592,085 |
| 80% | 80.3% | 525,904 | 527,825 |
| 70% | 69.8% | 460,166 | 458,749 |
| 60% | 59.9% | 394,428 | 393,649 |
| 50% | 50.3% | 328,690 | 330,983 |
| 40% | 39.8% | 262,952 | 261,615 |
| 30% | 30.0% | 197,214 | 197,353 |
| 20% | 20.0% | 131,476 | 131,573 |
| 10% | 10.1% | 65,738 | 66,392 |
| Active Idle | 0 | 0 | |