SPECpower_ssj2008 Copyright (C) 2007-2021 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL360 Gen10 Plus SPECpower_ssj2008 = 12,052 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: May 31, 2021 Publication: Jun 30, 2021 Hardware Availability: May-2021 Software Availability: Apr-2021 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 8,108,256 | 623 | 13,021 90% | 90.1% | 7,321,038 | 578 | 12,665 80% | 80.0% | 6,501,454 | 455 | 14,277 70% | 70.0% | 5,691,644 | 397 | 14,337 60% | 60.1% | 4,886,121 | 344 | 14,192 50% | 50.0% | 4,064,518 | 303 | 13,423 40% | 40.0% | 3,251,756 | 268 | 12,123 30% | 30.1% | 2,444,320 | 240 | 10,198 20% | 20.0% | 1,624,903 | 211 | 7,719 10% | 10.0% | 813,668 | 181 | 4,500 Active Idle | 0 | 110 | 0 sum of ssj_ops / sum of power = | 12,052 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen10 Plus Form Factor: 1U CPU Name: Intel Xeon Platinum 8380 2.30 GHz CPU Characteristics: 40 core, 2.30 GHz, 60 MB L3 Cache CPU Frequency (MHz): 2300 CPU(s) Enabled: 80 cores, 2 chips, 40 cores/chip Hardware Threads: 160 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 48 KB D on chip per core Secondary Cache: 1280 KB I+D on chip per core Tertiary Cache: 60 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 256 # and size of DIMM: 16 x 16384 MB Memory Details: 16GB 2Rx8 PC4-3200-T; slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket (P06031-B21) Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: HPE 800W (96%) Flex Slot Titanium Hot Plug Power Supply Kit (865438-B21) Disk Drive: HPE 480GB SATA 6G SSD (P40502-B21) Disk Controller: Embedded SATA # and type of Network Interface 1 x Intel Ethernet Adapter I350T4 OCPv3 Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2019 Datacenter OS Version: Version 1809 (Build 17763.1697) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.11+9-LTS-194, mixed mode) JVM Command-line Options: -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [3,C,30,C0,300,C00,3000,C000,30000,C0000,300 000,C00000,3000000,C000000,30000000,C0000000 ,300000000,C00000000,3000000000,C000000000] JVM Instances: 80 JVM Initial Heap (MB): 1950 JVM Maximum Heap (MB): 1950 JVM Address Bits: 64 Boot Firmware Version: U46 v1.42 (05/16/2021) Management Firmware Version: 2.42 Apr 05 2021 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: KB4598230 Boot Firmware Settings BIOS Platform Configuration (RBSU): * USB Support: All USB Ports Disabled * Memory Patrol Scrubbing: Disabled * Memory Bus Frequency: 2400 MHz * Power Regulator: OS Control * Intel Turbo Boost Technology: Disabled * Energy Performance Bias: Balanced Power * Intel DMI Link Frequency: Gen 1 Speed * NUMA Group Size Optimization: Clustered * Intel Performance Monitoring Support: Disabled * Sub-NUMA Clustering: Enabled SNC2 (2-clusters) * HW Prefetcher: Disabled * Adjacent Sector Prefetch: Disabled * DCU Stream Prefetcher: Disabled * XPT Prefetcher: Enabled * Maximum PCI Express Speed: PCIe Generation 1.0 Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via PSExec * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * SPECpower_ssj.props input.load_level.number_warehouses set to 160 due to a known inconsistency in processor reporting with this Java version * OS tunes: * Windows Power Options = Power Saver * Turn off Display = 1 Minute * Turn off hard disk = 1 Minute * Minimum Processor State=0% * Maximum Processor State=96% * Applied protection against speculative execution * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. * The system ROM used for this result contains Intel microcode version 00000000A002000D for the Intel Xeon Platinum 8380 processor. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360p Gen8 CPU Description: Intel Xeon E5-2670 Memory amount (GB): 64 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_144-b01 (build 25.144-b01, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GC23225 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-F13XW-20-1 Date of Calibration: 28-Jan-2021 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.2-3976349f-20201208 Setup Description: SUT Power Supply 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 623 | 29.1 90% | 578 | 29.1 80% | 455 | 29.1 70% | 397 | 29.1 60% | 344 | 29.1 50% | 303 | 29.1 40% | 268 | 29.1 30% | 240 | 29.1 20% | 211 | 29.1 10% | 181 | 29.1 Active Idle | 110 | 29.1 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 29.1 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20210601-01104-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 8,126,101 Calibration 2 | | | 8,122,785 Calibration 3 | | | 8,136,826 ssj_ops@calibrated=8,129,806 100% | 99.7% | 8,129,806 | 8,108,256 90% | 90.1% | 7,316,825 | 7,321,038 80% | 80.0% | 6,503,845 | 6,501,454 70% | 70.0% | 5,690,864 | 5,691,644 60% | 60.1% | 4,877,883 | 4,886,121 50% | 50.0% | 4,064,903 | 4,064,518 40% | 40.0% | 3,251,922 | 3,251,756 30% | 30.1% | 2,438,942 | 2,444,320 20% | 20.0% | 1,625,961 | 1,624,903 10% | 10.0% | 812,981 | 813,668 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20210601-01104.WIN-32SGVI5LB3T.txt) for additional details. Copyright (C) 2007-2021 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]