| Hewlett Packard Enterprise ProLiant DL325 Gen10 | SPECpower_ssj2008 = 15,724 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Jul 16, 2019 |
| Hardware Availability: | Aug-2019 | Software Availability: | Jun-2019 | Publication: | Aug 7, 2019 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.5% | 5,142,018 | 224 | 22,950 |
| 90% | 90.1% | 4,655,750 | 215 | 21,652 |
| 80% | 80.0% | 4,137,334 | 205 | 20,190 |
| 70% | 70.0% | 3,617,555 | 195 | 18,565 |
| 60% | 60.1% | 3,108,213 | 185 | 16,824 |
| 50% | 50.1% | 2,591,339 | 174 | 14,850 |
| 40% | 40.0% | 2,066,690 | 161 | 12,815 |
| 30% | 30.0% | 1,551,092 | 143 | 10,827 |
| 20% | 20.0% | 1,034,743 | 125 | 8,254 |
| 10% | 10.0% | 517,356 | 109 | 4,732 |
| Active Idle | 0 | 70.3 | 0 | |
| ∑ssj_ops / ∑power = | 15,724 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL325 Gen10 |
| Form Factor: | 1U |
| CPU Name: | AMD EPYC 7702P 2.00 GHz |
| CPU Characteristics: | 64-Core, 2.00 GHz, 256MB L3 Cache |
| CPU Frequency (MHz): | 2000 |
| CPU(s) Enabled: | 64 cores, 1 chip, 64 cores/chip |
| Hardware Threads: | 128 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 256 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 128 |
| # and size of DIMM: | 8 x 16384 MB |
| Memory Details: | 16GB 2Rx8 PC4-2933Y-R; slots 1, 3, 5, 7, 10, 12, 14 and 16 populated |
| Power Supply Quantity and Rating (W): | 1 x 800 |
| Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
| Disk Drive: | 1 x HPE 480GB SATA 6G SSD (P05976-B21) |
| Disk Controller: | Embedded SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | Windows Server 2019 Datacenter |
| OS Version: | Version 1809 (OS Build 17763.557) |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | OpenJDK 64-Bit Server VM (build 12.0.1+12, mixed mode, sharing), openjdk version "12.0.1" 2019-04-16 |
| JVM Command-line Options: | -server -Xmx3740m -Xms3740m -Xmn3000m -XX:SurvivorRatio=15 -XX:InlineSmallCode=4000 -XX:FreqInlineSize=3000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=4 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=300 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10 |
| JVM Affinity: | start /NODE [0-15] /AFFINITY [0xF, 0xF0] |
| JVM Instances: | 32 |
| JVM Initial Heap (MB): | 3740 |
| JVM Maximum Heap (MB): | 3740 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | A41 v2.00 (07/15/2019) |
| Management Firmware Version: | 1.43 pass 18 May 23 2019 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | Microsoft KB4504369, KB4503327, KB900088 |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL360 G9 |
| CPU Description: | 2x Intel Xeon E5-2660 v4 |
| Memory amount (GB): | 128 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2012 R2 |
| JVM Vendor: | Oracle |
| JVM Version: | 1.80_141-b15 (build 25.141-b15, mixed mode) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT210 |
| Serial Number: | 91K308562 |
| Connectivity: | GPIB vi NI GPIB-USB-HS |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TRANSCAT |
| Calibration Label: | 5-E553M-20-1 |
| Date of Calibration: | 21-May-2019 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.9.0-ee285d08-20190201 |
| Setup Description: | Connected to Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 224 | 32.0 |
| 90% | 215 | 32.4 |
| 80% | 205 | 32.9 |
| 70% | 195 | 33.2 |
| 60% | 185 | 33.4 |
| 50% | 174 | 33.3 |
| 40% | 161 | 33.2 |
| 30% | 143 | 33.1 |
| 20% | 125 | 33.1 |
| 10% | 109 | 33.2 |
| Active Idle | 70.3 | 33.1 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 32.0 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 5,157,280 | ||
| Calibration 2 | 5,169,599 | ||
| Calibration 3 | 5,169,113 | ||
| ssj_ops@calibrated=5,169,356 | |||
| 100% | 99.5% | 5,169,356 | 5,142,018 |
| 90% | 90.1% | 4,652,421 | 4,655,750 |
| 80% | 80.0% | 4,135,485 | 4,137,334 |
| 70% | 70.0% | 3,618,549 | 3,617,555 |
| 60% | 60.1% | 3,101,614 | 3,108,213 |
| 50% | 50.1% | 2,584,678 | 2,591,339 |
| 40% | 40.0% | 2,067,743 | 2,066,690 |
| 30% | 30.0% | 1,550,807 | 1,551,092 |
| 20% | 20.0% | 1,033,871 | 1,034,743 |
| 10% | 10.0% | 516,936 | 517,356 |
| Active Idle | 0 | 0 | |