SPECpower_ssj2008 Copyright (C) 2007-2019 Standard Performance Evaluation Corporation Hewlett Packard Enterprise Synergy 480 Gen10 Compute Module SPECpower_ssj2008 = 11,845 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Apr 8, 2019 Publication: May 8, 2019 Hardware Availability: Apr-2019 Software Availability: Mar-2019 Test Method: Multi Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.6% | 69,086,440 | 5,384 | 12,832 90% | 90.0% | 62,410,813 | 4,704 | 13,268 80% | 80.0% | 55,454,906 | 4,027 | 13,770 70% | 70.0% | 48,541,784 | 3,510 | 13,829 60% | 60.0% | 41,617,209 | 3,056 | 13,619 50% | 50.0% | 34,673,544 | 2,664 | 13,014 40% | 40.0% | 27,715,117 | 2,360 | 11,743 30% | 30.0% | 20,788,854 | 2,103 | 9,884 20% | 20.0% | 13,877,844 | 1,854 | 7,486 10% | 10.0% | 6,940,921 | 1,591 | 4,361 Active Idle | 0 | 922 | 0 sum of ssj_ops / sum of power = | 11,845 Aggregate SUT Data # of Nodes | # of Chips | # of Cores | # of | Total RAM | # of OS Images | # of JVM | | | Threads | (GB) | | Instances ---------- | ---------- | ---------- | ---------- | ---------- | -------------- | --------- 12 | 24 | 672 | 1,344 | 2,304 | 12 | 48 System Under Test Shared Hardware SHARED HARDWARE Enclosure: HPE Synergy 12000 Frame Form Factor: 12U Power Supply Quantity and Rating 6 x 2650 (W): Power Supply Details: HPE 2650W Performance Hot Plug Titanium Plus Power Supply Kit (798095-B21) Network Switch: 1 x H3C S5820X-28S (JD373A) Network Switch Details: 10 Gb Fibre 24 ports KVM Switch: None KVM Switch Details: N/A Other Hardware: 1 x HPE Synergy 10/40Gb Pass Thru Module (799330-B21), 1 x Synergy Composer (804353-B21), 1 x Synergy Frame Link Module (804942-B21) Comment: Network switch not measured for power Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 12 Comment: SUT HARDWARE PER NODE Hardware Vendor: Hewlett Packard Enterprise Model: Synergy 480 Gen10 Compute Module Form Factor: 7U CPU Name: Intel Xeon Platinum 8280 @ 2.70GHz (Intel Turbo Boost Technology up to 4.00 GHz) CPU Characteristics: 28-Core, 2.70 GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2700 CPU(s) Enabled: 56 cores, 2 chips, 28 cores/chip Hardware Threads: 112 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 12 x 16GB 2Rx8 PC4-2933Y-R; slots 1, 3, 5, 8, 10 and 12 populated in each socket Power Supply Quantity and Rating None (W): Power Supply Details: N/A Disk Drive: 1 x HPE 240GB 6G SATA M.2 SSD (875488-B21) Disk Controller: HPE Smart Array S100i SR Gen10 # and type of Network Interface 1 x HPE Synergy 3820C 10/20Gb CNA Cards (NICs) Installed: NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: H/S: Standard SOFTWARE PER NODE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2012 R2 Datacenter OS Version: Version 6.3 (Build 9600) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn19000m -Xms21000m -Xmx21000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0xFFFFFFF] JVM Instances: 4 JVM Initial Heap (MB): 21000 JVM Maximum Heap (MB): 21000 JVM Address Bits: 64 Boot Firmware Version: I42 v2.00 (02/02/2019) Management Firmware Version: 1.40 Feb 05 2019 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: HPE Service Pack for ProLiant (SPP) Version: 2019.03.0, Microsoft Windows KB4056898, KB4338815 Boot Firmware Settings Serial Port Options: * Embedded Serial Port: Disabled * Virtual Serial Port: Disabled * BIOS Serial Console Port: DisabledUSB Options * USB Support: All USB Ports Disabled * USB Boot Support: Disabled * Internal SD Card Slot: DisabledProcessor Options * x2APIC: Disabled Memory Options * Memory Bus Frequency: 2400 MHz * Memory Patrol Scrubbing: DisabledVirtualization Options * SR-IOV: Disabled * VT-D: Disabled * VT-x: DisabledEmbedded SATA Configuration * Smart Array SW RAID SupportPower and Performance Options * Power Regulator: OS Control Mode * Intel Turbo Boost Technology: Enabled (default) * Energy Efficient Turbo: Enabled (default: Enabled if Turbo Enabled) * Energy Performance Bias: Balanced Power (default: Balanced Performance) * Collaborative Power Control: Enabled (default) * Intel DMI Link Frequency: Gen 1 Speed * NUMA Group Size Optimization: Clustered * Sub-NUMA Clustering: EnabledProcessor Prefetcher Options * HW Prefetcher: Disabled * Adjacent Sector Prefetch: Disabled * DCU Stream Prefetcher: Disabled * XPT Prefetcher: EnabledI/O options * Intel NIC DMA Channels (IOAT): DisabledIntel UPI Options * Intel UPI Link Frequency: Min UPI SpeedPCIe Device Configuration -> Advanced PCIe Configuration * HPE Synergy 3820C 10/20Gb CNA: PCIe Generation 1Advanced Service Options * AHS PCI Logging Level: Minimal Logging Management Firmware Settings See SUT Notes System Under Test Notes Benchmark started via PSExec SPECpower_ssj.props input.load_level.number_warehouses set to 112 to detect the full number of available processors on the SUT Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. OS tunings * Windows Power Options = Power Saver * Turn off Display = 1 Minute * Turn off hard disk = 1 Minute * System Cooling = Passive * Processor power management = Minimum Processor State = 0% * Maximum Processor State = 95% * PCI Express Power Management = Maximum Power SavingsApplied protection against speculative execution * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. * reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverride /t REG_DWORD /d 0 /f * reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management" /v FeatureSettingsOverrideMask /t REG_DWORD /d 3 /f Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_191-b12 (build 25.191-b12, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB53024 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-EM5Y4-80-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: sameas CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.0-ee285d08-20190201 Setup Description: SUT Power Supplies 1 and 4 POWER ANALYZER PWR2 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB47168 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-EM5Y4-60-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.0-ee285d08-20190201 Setup Description: SUT Power Supplies 2 and 5 POWER ANALYZER PWR3 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GC21887 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-EM5Y4-20-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.0-ee285d08-20190201 Setup Description: SUT Power Supplies 3 and 6 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 5,384 | 20.9 90% | 4,704 | 20.9 80% | 4,027 | 20.9 70% | 3,510 | 20.9 60% | 3,056 | 20.9 50% | 2,664 | 21.0 40% | 2,360 | 21.0 30% | 2,103 | 21.0 20% | 1,854 | 21.0 10% | 1,591 | 20.9 Active Idle | 922 | 20.9 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 20.9 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20190410-00955-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 69,335,169 Calibration 2 | | | 69,339,945 Calibration 3 | | | 69,340,657 ssj_ops@calibrated=69,340,301 100% | 99.6% | 69,340,301 | 69,086,440 90% | 90.0% | 62,406,271 | 62,410,813 80% | 80.0% | 55,472,241 | 55,454,906 70% | 70.0% | 48,538,211 | 48,541,784 60% | 60.0% | 41,604,181 | 41,617,209 50% | 50.0% | 34,670,151 | 34,673,544 40% | 40.0% | 27,736,120 | 27,715,117 30% | 30.0% | 20,802,090 | 20,788,854 20% | 20.0% | 13,868,060 | 13,877,844 10% | 10.0% | 6,934,030 | 6,940,921 Active Idle | | 0 | 0 See the Aggregate Performance Report (power_ssj2008-20190410-00955.SUT.txt) for additional details. Copyright (C) 2007-2019 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]