| Hewlett Packard Enterprise ProLiant DL360 Gen10 | SPECpower_ssj2008 = 11,637 overall ssj_ops/watt | ||||
| Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
| Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Mar 11, 2019 |
| Hardware Availability: | Apr-2019 | Software Availability: | Mar-2018 | Publication: | Apr 2, 2019 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.7% | 3,025,574 | 235 | 12,854 |
| 90% | 90.1% | 2,733,038 | 214 | 12,753 |
| 80% | 80.0% | 2,426,565 | 186 | 13,064 |
| 70% | 70.1% | 2,126,188 | 160 | 13,300 |
| 60% | 59.9% | 1,817,419 | 140 | 12,978 |
| 50% | 50.0% | 1,518,431 | 122 | 12,405 |
| 40% | 40.0% | 1,215,306 | 107 | 11,392 |
| 30% | 29.9% | 908,421 | 90.5 | 10,039 |
| 20% | 20.0% | 607,240 | 76.9 | 7,896 |
| 10% | 10.0% | 302,015 | 64.3 | 4,696 |
| Active Idle | 0 | 37.3 | 0 | |
| ∑ssj_ops / ∑power = | 11,637 | |||
| Set Identifier: | SUT |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | SUT |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL360 Gen10 |
| Form Factor: | 1U |
| CPU Name: | Intel Xeon Platinum 8280 @ 2.70GHz |
| CPU Characteristics: | 28-Core, 2.70 GHz, 38.5MB L3 Cache |
| CPU Frequency (MHz): | 2700 |
| CPU(s) Enabled: | 28 cores, 1 chip, 28 cores/chip |
| Hardware Threads: | 56 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 1 MB I+D on chip per core |
| Tertiary Cache: | 39424 KB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 48 |
| # and size of DIMM: | 6 x 8182 MB |
| Memory Details: | 6 x 8GB 2Rx8 PC4-2666V-R; slots 1, 3, 5, 8, 10, and 12 populated in each socket |
| Power Supply Quantity and Rating (W): | 1 x 800 |
| Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply 96% (865438-B21) |
| Disk Drive: | 1 x HPE 240GB SATA M.2 2280 SSD (875488-B21) |
| Disk Controller: | Embedded SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (see SUT Notes) |
| Operating System (OS): | SUSE Linux Enterprise Server 12 SP4 |
| OS Version: | 4.12.14-94.41-default |
| Filesystem: | XFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| JVM Command-line Options: | -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=384 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=37 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
| JVM Affinity: | numactl --cpunodebind=[0-1] --localalloc |
| JVM Instances: | 2 |
| JVM Initial Heap (MB): | 21000 |
| JVM Maximum Heap (MB): | 21000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | U32 v2.00 (02/02/2019) |
| Management Firmware Version: | 1.40 Feb 05 2019 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | HPE Service Pack for ProLiant (SPP) - Version 2019.03.0 (Mar 2019) |
| Hardware | |
|---|---|
| Hardware Vendor: | Hewlett Packard Enterprise |
| Model: | ProLiant DL360 Gen9 |
| CPU Description: | 2 x Intel Xeon E5-2660 v3 |
| Memory amount (GB): | 128 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2012 R2 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | 1.8.0_161-b12 (build 25.161-b12, mixed mode) |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT310 |
| Serial Number: | C2SF14001V |
| Connectivity: | Yokogawa-USB |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TRANSCAT |
| Calibration Label: | 5-EP5YB-20-1 |
| Date of Calibration: | 08-Aug-2018 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.8.1-260d064e-20161220 |
| Setup Description: | Connected to SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.70.105.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 235 | 21.7 |
| 90% | 214 | 21.7 |
| 80% | 186 | 21.6 |
| 70% | 160 | 21.6 |
| 60% | 140 | 21.6 |
| 50% | 122 | 21.5 |
| 40% | 107 | 21.5 |
| 30% | 90.5 | 21.5 |
| 20% | 76.9 | 21.5 |
| 10% | 64.3 | 21.5 |
| Active Idle | 37.3 | 21.4 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 220V / 60 Hz / 1 phase / 2 wires | 21.4 | 132 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 3,034,819 | ||
| Calibration 2 | 3,034,092 | ||
| Calibration 3 | 3,035,111 | ||
| ssj_ops@calibrated=3,034,601 | |||
| 100% | 99.7% | 3,034,601 | 3,025,574 |
| 90% | 90.1% | 2,731,141 | 2,733,038 |
| 80% | 80.0% | 2,427,681 | 2,426,565 |
| 70% | 70.1% | 2,124,221 | 2,126,188 |
| 60% | 59.9% | 1,820,761 | 1,817,419 |
| 50% | 50.0% | 1,517,301 | 1,518,431 |
| 40% | 40.0% | 1,213,840 | 1,215,306 |
| 30% | 29.9% | 910,380 | 908,421 |
| 20% | 20.0% | 606,920 | 607,240 |
| 10% | 10.0% | 303,460 | 302,015 |
| Active Idle | 0 | 0 | |