Hewlett Packard Enterprise ProLiant DL560 Gen10 | SPECpower_ssj2008 = 11,463 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Aug 27, 2018 |
Hardware Availability: | Jun-2018 | Software Availability: | Jun-2018 | Publication: | Sep 12, 2018 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.8% | 11,554,819 | 942 | 12,271 |
90% | 90.0% | 10,420,604 | 854 | 12,197 |
80% | 80.0% | 9,265,445 | 743 | 12,469 |
70% | 70.0% | 8,110,297 | 623 | 13,028 |
60% | 59.9% | 6,940,634 | 545 | 12,741 |
50% | 50.0% | 5,789,843 | 476 | 12,175 |
40% | 40.0% | 4,628,921 | 410 | 11,304 |
30% | 30.0% | 3,473,288 | 348 | 9,987 |
20% | 20.0% | 2,314,205 | 290 | 7,989 |
10% | 10.0% | 1,158,780 | 236 | 4,910 |
Active Idle | 0 | 88.6 | 0 | |
∑ssj_ops / ∑power = | 11,463 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL560 Gen10 |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8180 2.50GHz |
CPU Characteristics: | 28-Core, 2.50 GHz, 38.5MB L3 Cache |
CPU Frequency (MHz): | 2500 |
CPU(s) Enabled: | 112 cores, 4 chips, 28 cores/chip |
Hardware Threads: | 224 (2 / core) |
CPU(s) Orderable: | 1,2,3,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 192 |
# and size of DIMM: | 24 x 8192 MB |
Memory Details: | 8 GB 2Rx8 PC4-2666V-R: slots 1, 3, 5, 8, 10, 12 populated on each socket |
Power Supply Quantity and Rating (W): | 2 x 800 |
Power Supply Details: | HPE DPS-800AB-35 A 96% (865438-B21) |
Disk Drive: | 1 x HPE 240GB SATA 6G M.2 2280 SSD (875488-B21) |
Disk Controller: | 1 x HPE Smart Array S100i SR Gen10 (784308-B21) |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 2-port 332T Adapter (615732-B21) |
NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 12 SP3 |
OS Version: | 4.4.120-94.17-default |
Filesystem: | xfs |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=384 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
JVM Affinity: | numactl --cpunodebind=[0-7] --localalloc |
JVM Instances: | 8 |
JVM Initial Heap (MB): | 21000 |
JVM Maximum Heap (MB): | 21000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U34 v1.40 06/15/2018 |
Management Firmware Version: | 1.30 May 31 2018 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE Service Pack for ProLiant (SPP) Version:2018.06.0 (26 Jun 2018), HPE Microprocessor Vulnerability ROM Updates (spp_supplement-2018.06.0.2) Version:2018.06.0(9 Jul 2018); ucode-intel-20180312-13.17.1 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 G9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 - V6.3 9600 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 10.0.2 (build 10.0.2+13, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310E |
Serial Number: | C2QM2201V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 1-EM8E7-40-1 |
Date of Calibration: | 16-Jul-2018 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | SUT Power Supplies 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 942 | 24.4 |
90% | 854 | 24.4 |
80% | 743 | 24.4 |
70% | 623 | 24.4 |
60% | 545 | 24.4 |
50% | 476 | 24.4 |
40% | 410 | 24.3 |
30% | 348 | 24.2 |
20% | 290 | 24.2 |
10% | 236 | 24.2 |
Active Idle | 88.6 | 24.2 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 24.2 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 11,594,194 | ||
Calibration 2 | 11,579,926 | ||
Calibration 3 | 11,584,958 | ||
ssj_ops@calibrated=11,582,442 | |||
100% | 99.8% | 11,582,442 | 11,554,819 |
90% | 90.0% | 10,424,198 | 10,420,604 |
80% | 80.0% | 9,265,954 | 9,265,445 |
70% | 70.0% | 8,107,710 | 8,110,297 |
60% | 59.9% | 6,949,465 | 6,940,634 |
50% | 50.0% | 5,791,221 | 5,789,843 |
40% | 40.0% | 4,632,977 | 4,628,921 |
30% | 30.0% | 3,474,733 | 3,473,288 |
20% | 20.0% | 2,316,488 | 2,314,205 |
10% | 10.0% | 1,158,244 | 1,158,780 |
Active Idle | 0 | 0 |