Hewlett Packard Enterprise ProLiant DL385 Gen10 SPECpower_ssj2008 = 11,140 overall ssj_ops/watt
Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Test Method: Single Node
Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Jul 3, 2018
Hardware Availability: May-2018 Software Availability: Feb-2018 Publication: Jul 18, 2018
System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered
Benchmark Results Summary
Performance Power Performance to Power Ratio
Target Load Actual Load ssj_ops Average Active Power (W)
100% 99.9% 4,283,406 295 14,538
90% 89.8% 3,852,369 269 14,347
80% 80.0% 3,430,523 246 13,963
70% 69.9% 2,996,010 218 13,726
60% 60.0% 2,572,667 199 12,948
50% 49.9% 2,139,917 184 11,614
40% 40.2% 1,722,706 172 9,991
30% 30.0% 1,287,876 160 8,041
20% 19.9% 854,414 148 5,784
10% 10.0% 427,894 137 3,124
Active Idle 0 88.3 0
∑ssj_ops / ∑power = 11,140
Graph of results
System Under Test
Set: 'SUT'
Set Identifier: SUT
Set Description: System Under Test
# of Identical Nodes: 1
Comment: SUT
Hardware
Hardware Vendor: Hewlett Packard Enterprise
Model: ProLiant DL385 Gen10
Form Factor: 2U
CPU Name: AMD EPYC 7601 2.20 GHz
CPU Characteristics: 32-Core, 2.20GHz 64MB L3 Cache
CPU Frequency (MHz): 2200
CPU(s) Enabled: 64 cores, 2 chips, 32 cores/chip
Hardware Threads: 128 (2 / core)
CPU(s) Orderable: 1,2 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 512 KB I+D on chip per core
Tertiary Cache: 64 MB I+D on chip per core
Other Cache: None
Memory Amount (GB): 128
# and size of DIMM: 16 x 8192 MB
Memory Details: 8GB 1Rx8 PC4-2666V-R slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket
Power Supply Quantity and Rating (W): 1 x 800
Power Supply Details: HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21)
Disk Drive: 1 x HPE 150GB SATA 6G M.2 2280 SSD (875317-B21)
Disk Controller: embedded SATA
# and type of Network Interface Cards (NICs) Installed: 1 x HPE Ethernet 1Gb 4-port 331i Adapter
NICs Enabled in Firmware / OS / Connected: 4/4/1
Network Speed (Mbit): 1000
Keyboard: None
Mouse: None
Monitor: None
Optical Drives: No
Other Hardware: 1 x HPE High Performance Fan kit (867810-B21)
Software
Power Management: Enabled (see SUT Notes)
Operating System (OS): Windows Server 2012 R2 Datacenter
OS Version: Version 6.3
Filesystem: NTFS
JVM Vendor: Oracle Corporation
JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80
JVM Command-line Options: -server -Xmx6656m -Xms6656m -Xmn4500m -XX:SurvivorRatio=15 -XX:InlineSmallCode=8000 -XX:FreqInlineSize=7000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=8 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:AllocatePrefetchLines=7 -XX:MaxInlineSize=80 -XX:LoopUnrollLimit=30 -XX:AllocatePrefetchDistance=192 -XX:InitialTenuringThreshold=10
JVM Affinity: start /NODE[0,1,2,3,4,5,6,7] /AFFINITY [0xFF, 0xFF00]
JVM Instances: 16
JVM Initial Heap (MB): 6656
JVM Maximum Heap (MB): 6656
JVM Address Bits: 64
Boot Firmware Version: A40 v1.20 (01/12/2018)
Management Firmware Version: 1.30 May 31 2018
Workload Version: SSJ 1.2.10
Director Location: Controller
Other Software: HPE Service Pack for ProLiant (SPP) Version:2018.03.0 (Feb 28 2018); Microsoft Windows KB4054519
Boot Firmware Settings
Management Firmware Settings
See SUT Notes
System Under Test Notes
Controller System
Hardware
Hardware Vendor: Hewlett Packard Enterprise
Model: ProLiant DL360 Gen9
CPU Description: 2x Intel Xeon E5-2660 v3
Memory amount (GB): 128
Software
Operating System (OS): Windows Server 2012 R2
JVM Vendor: Oracle Corporation
JVM Version: 1.8.0_161-b12 (build 25.161-b12, mixed mode)
CCS Version: 1.2.6
Measurement Devices
Power Analyzer pwr1
Hardware Vendor: Yokogawa
Model: WT310E
Serial Number: C2QM22002V
Connectivity: Yokogawa USB
Input Connection: Default
Metrology Institute: NIST
Accredited by: TRANSCAT
Calibration Label: 5-D537U-20-1
Date of Calibration: 28-Jul-2017
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
PTDaemon Version: 1.8.1-260d064e-20161220
Setup Description: SUT Power Supply 1
Temperature Sensor temp1
Hardware Vendor: Digi International Inc.
Model: Watchport/H
Driver Version: 5.70.105.0
Connectivity: USB
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
Setup Description: 5 mm in front of SUT main intake
Notes
None
Aggregate Electrical and Environmental Data
Target Load Average Active Power (W) Minimum Ambient Temperature (°C)
100% 295 21.9
90% 269 22.0
80% 246 22.2
70% 218 21.8
60% 199 21.6
50% 184 21.5
40% 172 21.6
30% 160 21.8
20% 148 21.9
10% 137 21.9
Active Idle 88.3 21.6
Line Standard Minimum Temperature (°C) Elevation (m)
210V / 60 Hz / 1 phase / 2 wires 21.5 132
See the Power/Temperature Details Report for additional details.
Aggregate Performance Data
Target Load Actual Load ssj_ops
Target Actual
Calibration 1     4,289,186
Calibration 2     4,287,946
Calibration 3     4,287,479
ssj_ops@calibrated=4,287,712
100% 99.9% 4,287,712 4,283,406
90% 89.8% 3,858,941 3,852,369
80% 80.0% 3,430,170 3,430,523
70% 69.9% 3,001,399 2,996,010
60% 60.0% 2,572,627 2,572,667
50% 49.9% 2,143,856 2,139,917
40% 40.2% 1,715,085 1,722,706
30% 30.0% 1,286,314 1,287,876
20% 19.9% 857,542 854,414
10% 10.0% 428,771 427,894
Active Idle   0 0
Graph of results
See the Host Performance Report for additional details.