| Dell Inc. PowerEdge R7425 (AMD EPYC 7601 2.20 GHz) | SPECpower_ssj2008 = 11,064 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | May 17, 2018 |
| Hardware Availability: | May-2018 | Software Availability: | Apr-2015 | Publication: | Jun 7, 2018 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.6% | 4,376,919 | 287 | 15,238 |
| 90% | 90.0% | 3,956,891 | 271 | 14,597 |
| 80% | 80.1% | 3,519,541 | 253 | 13,888 |
| 70% | 70.0% | 3,076,425 | 234 | 13,150 |
| 60% | 60.0% | 2,639,196 | 214 | 12,312 |
| 50% | 49.9% | 2,193,466 | 197 | 11,153 |
| 40% | 40.0% | 1,760,219 | 182 | 9,656 |
| 30% | 30.0% | 1,317,936 | 168 | 7,847 |
| 20% | 19.9% | 876,211 | 154 | 5,692 |
| 10% | 10.0% | 439,432 | 138 | 3,195 |
| Active Idle | 0 | 84.9 | 0 | |
| ∑ssj_ops / ∑power = | 11,064 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge R7425 |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R7425 (AMD EPYC 7601 2.20 GHz) |
| Form Factor: | 2U |
| CPU Name: | AMD EPYC 7601 2.20 GHz |
| CPU Characteristics: | 32 core, 2.20 GHz, 64 MB L3 Cache |
| CPU Frequency (MHz): | 2200 |
| CPU(s) Enabled: | 64 cores, 2 chips, 32 cores/chip |
| Hardware Threads: | 128 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 512 KB I+D on chip per core |
| Tertiary Cache: | 64 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 128 |
| # and size of DIMM: | 16 x 8 GB |
| Memory Details: | 8GB 1Rx8 PC4-2666V; Dell p/n 1VRGY, Slots A1-8,B1-8 populated. |
| Power Supply Quantity and Rating (W): | 1 x 1100 |
| Power Supply Details: | Dell p/n Y26KX |
| Disk Drive: | 1 x 120 GB SATA SSD, Dell p/n KX83R |
| Disk Controller: | Native Chipset SATA |
| # and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720, Dell P/N FM487 |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | AMD Naples Balanced V3 (see SUT notes) |
| Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
| OS Version: | Version 6.3.9600.18969 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80-b15 |
| JVM Command-line Options: | -XX:InlineSmallCode=800 -XX:FreqInlineSize=2000 -XX:+UseLargePages -XX:+UseBiasedLocking -XX:ParallelGCThreads=1 -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+UseAdaptiveSizePolicy -Xmx1024m -Xms1024m -Xmn900m |
| JVM Affinity: | start /NODE [0,1,2,3,4,5,6,7] /AFFINITY [0x1,0x4,0x10,0x40,0x100,0x400,0x1000,0x4000] |
| JVM Instances: | 64 |
| JVM Initial Heap (MB): | 1024 |
| JVM Maximum Heap (MB): | 1024 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 1.3.6 |
| Management Firmware Version: | 3.17.17.17 A00 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | none |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R410 |
| CPU Description: | Intel Xeon E5620, 2.40 GHz |
| Memory amount (GB): | 32.0 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 1.8.0_121 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT210 |
| Serial Number: | 91KA21979 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | TesCom |
| Calibration Label: | 66762 |
| Date of Calibration: | 27-Feb-2018 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.8.1-260d064e-20161220 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 287 | 20.9 |
| 90% | 271 | 21.1 |
| 80% | 253 | 21.2 |
| 70% | 234 | 21.4 |
| 60% | 214 | 21.4 |
| 50% | 197 | 21.4 |
| 40% | 182 | 21.3 |
| 30% | 168 | 21.1 |
| 20% | 154 | 21.1 |
| 10% | 138 | 20.9 |
| Active Idle | 84.9 | 20.8 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 20.8 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 4,400,240 | ||
| Calibration 2 | 4,394,708 | ||
| Calibration 3 | 4,396,848 | ||
| ssj_ops@calibrated=4,395,778 | |||
| 100% | 99.6% | 4,395,778 | 4,376,919 |
| 90% | 90.0% | 3,956,200 | 3,956,891 |
| 80% | 80.1% | 3,516,622 | 3,519,541 |
| 70% | 70.0% | 3,077,044 | 3,076,425 |
| 60% | 60.0% | 2,637,467 | 2,639,196 |
| 50% | 49.9% | 2,197,889 | 2,193,466 |
| 40% | 40.0% | 1,758,311 | 1,760,219 |
| 30% | 30.0% | 1,318,733 | 1,317,936 |
| 20% | 19.9% | 879,156 | 876,211 |
| 10% | 10.0% | 439,578 | 439,432 |
| Active Idle | 0 | 0 | |