Hewlett Packard Enterprise ProLiant DL360 Gen10 | SPECpower_ssj2008 = 12,313 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Jun 28, 2017 |
Hardware Availability: | Sep-2017 | Software Availability: | Jan-2015 | Publication: | Jul 19, 2017 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.7% | 5,779,630 | 451 | 12,825 |
90% | 89.9% | 5,214,638 | 407 | 12,817 |
80% | 79.8% | 4,629,746 | 341 | 13,592 |
70% | 70.0% | 4,061,208 | 289 | 14,057 |
60% | 60.1% | 3,483,129 | 246 | 14,152 |
50% | 50.0% | 2,901,407 | 211 | 13,755 |
40% | 40.0% | 2,321,436 | 183 | 12,665 |
30% | 30.0% | 1,737,318 | 160 | 10,862 |
20% | 20.0% | 1,162,148 | 138 | 8,432 |
10% | 10.0% | 581,133 | 114 | 5,077 |
Active Idle | 0 | 48.7 | 0 | |
∑ssj_ops / ∑power = | 12,313 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen10 |
Form Factor: | 1U |
CPU Name: | Intel Xeon Platinum 8180 2.50GHz |
CPU Characteristics: | 28-Core, 2.50 GHz, 38.5MB L3 Cache |
CPU Frequency (MHz): | 2500 |
CPU(s) Enabled: | 56 cores, 2 chips, 28 cores/chip |
Hardware Threads: | 112 (2 / core) |
CPU(s) Orderable: | 1,2 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 96 |
# and size of DIMM: | 12 x 8182 MB |
Memory Details: | 12 x 8GB 2Rx8 PC4-2666V-R; slots 1, 3, 5, 8, 10, and 12 populated in each socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | DPS-800AB (865438-B21) 96% |
Disk Drive: | 1 x HPE 340GB SATA RI UFF M.2 Kit (815606-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE Ethernet 1Gb 4-port 331i Adapter |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3 (Build 9600) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn17000m -Xms19000m -Xmx19000m -Xmn11g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=24 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=9000 -XX:MaxInlineSize=270 -XX:FreqInlineSize=6000 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:+UseStringCache |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0xFFFFFFF] |
JVM Instances: | 4 |
JVM Initial Heap (MB): | 19000 |
JVM Maximum Heap (MB): | 19000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U32 v1.00 (05/22/2017) |
Management Firmware Version: | 1.10 pass 67 May 05 2017 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2 x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_74-b02 (build 25.74-b02, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310E |
Serial Number: | C2SF14002V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | Yokogawa |
Calibration Label: | 07282016-C2SF14002V |
Date of Calibration: | 28-Jul-2016 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | Connected to SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 451 | 21.4 |
90% | 407 | 21.4 |
80% | 341 | 21.4 |
70% | 289 | 21.5 |
60% | 246 | 21.5 |
50% | 211 | 21.4 |
40% | 183 | 21.3 |
30% | 160 | 21.3 |
20% | 138 | 21.4 |
10% | 114 | 21.4 |
Active Idle | 48.7 | 21.3 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 21.3 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 5,805,185 | ||
Calibration 2 | 5,798,570 | ||
Calibration 3 | 5,800,370 | ||
ssj_ops@calibrated=5,799,470 | |||
100% | 99.7% | 5,799,470 | 5,779,630 |
90% | 89.9% | 5,219,523 | 5,214,638 |
80% | 79.8% | 4,639,576 | 4,629,746 |
70% | 70.0% | 4,059,629 | 4,061,208 |
60% | 60.1% | 3,479,682 | 3,483,129 |
50% | 50.0% | 2,899,735 | 2,901,407 |
40% | 40.0% | 2,319,788 | 2,321,436 |
30% | 30.0% | 1,739,841 | 1,737,318 |
20% | 20.0% | 1,159,894 | 1,162,148 |
10% | 10.0% | 579,947 | 581,133 |
Active Idle | 0 | 0 |