Quanta Computer Inc. QuantaGrid D52B-2U | SPECpower_ssj2008 = 12,047 overall ssj_ops/watt | ||||
Test Sponsor: | Quanta Computer Inc. | SPEC License #: | 9050 | Test Method: | Single Node |
Tested By: | Quanta Cloud Technology | Test Location: | Taoyuan, TW, R.O.C | Test Date: | Jun 21, 2017 |
Hardware Availability: | Jul-2017 | Software Availability: | Sep-2016 | Publication: | Jul 11, 2017 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 98.5% | 5,457,796 | 454 | 12,019 |
90% | 90.1% | 4,993,245 | 398 | 12,532 |
80% | 80.0% | 4,433,469 | 331 | 13,389 |
70% | 70.0% | 3,878,631 | 274 | 14,138 |
60% | 59.9% | 3,319,463 | 238 | 13,941 |
50% | 49.9% | 2,765,735 | 203 | 13,618 |
40% | 40.0% | 2,215,868 | 178 | 12,474 |
30% | 30.0% | 1,660,587 | 156 | 10,662 |
20% | 20.0% | 1,109,387 | 135 | 8,193 |
10% | 10.0% | 553,417 | 114 | 4,846 |
Active Idle | 0 | 40.3 | 0 | |
∑ssj_ops / ∑power = | 12,047 |
Set Identifier: | S5B |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | None |
Hardware | |
---|---|
Hardware Vendor: | Quanta Computer Inc. |
Model: | QuantaGrid D52B-2U |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8180 2.50GHz |
CPU Characteristics: | 28 core, 2.5GHz, 38.5MB L3 Cache |
CPU Frequency (MHz): | 2500 |
CPU(s) Enabled: | 56 cores, 2 chips, 28 cores/chip |
Hardware Threads: | 112 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per chip |
Tertiary Cache: | 39424 KB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 192 |
# and size of DIMM: | 12 x 16384 MB |
Memory Details: | 16GB 2Rx4 PC4-2666V-RE1-12-PA0; slots A0, B0, C0, D0, E0, F0, populated for both Processor sockets |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | ARTESYN MC800B6-3-4R-02 |
Disk Drive: | 1 x 120G SATA SSD Quanta P/N:ABS120HC007 |
Disk Controller: | Integrated SATA controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x Intel Ethernet Controller I210, 1-port |
NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Balanced power plan in OS |
Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3.9600 (Build 9600) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmn1300m -Xms1550m -Xmx1550m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000,0x30000,0xC0000,0x300000,0xC00000,0x3000000,0xC000000] |
JVM Instances: | 56 |
JVM Initial Heap (MB): | 1550 |
JVM Maximum Heap (MB): | 1550 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 3A05 |
Management Firmware Version: | 3.13 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Intel Corporation |
Model: | A08 |
CPU Description: | Intel Core(TM)2Duo CPU E7000 |
Memory amount (GB): | 2 |
Software | |
---|---|
Operating System (OS): | Windows Server 2008 R2 Datacenter 64-bit SP1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Hotspot(TM) 64-Bit Server VM,version 1.8.0_60 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | YOKOGAWA Electric International Pte. Ltd. |
Model: | WT210 |
Serial Number: | 91MC16750 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | NML (National Measurement Laboratory) |
Accredited by: | Electronics Testing Center,Taiwan |
Calibration Label: | Q10680060 |
Date of Calibration: | 16-Oct-2016 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.1-260d064e-20161220 |
Setup Description: | Connected to power supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.10.26.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 1 cm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 454 | 21.6 |
90% | 398 | 21.6 |
80% | 331 | 21.7 |
70% | 274 | 21.8 |
60% | 238 | 21.8 |
50% | 203 | 21.7 |
40% | 178 | 21.6 |
30% | 156 | 21.6 |
20% | 135 | 21.5 |
10% | 114 | 21.4 |
Active Idle | 40.3 | 21.4 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
220V / 60 Hz / 1 phase / 2 wires | 21.4 | 250 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 5,595,971 | ||
Calibration 2 | 5,528,152 | ||
Calibration 3 | 5,554,019 | ||
ssj_ops@calibrated=5,541,086 | |||
100% | 98.5% | 5,541,086 | 5,457,796 |
90% | 90.1% | 4,986,977 | 4,993,245 |
80% | 80.0% | 4,432,869 | 4,433,469 |
70% | 70.0% | 3,878,760 | 3,878,631 |
60% | 59.9% | 3,324,651 | 3,319,463 |
50% | 49.9% | 2,770,543 | 2,765,735 |
40% | 40.0% | 2,216,434 | 2,215,868 |
30% | 30.0% | 1,662,326 | 1,660,587 |
20% | 20.0% | 1,108,217 | 1,109,387 |
10% | 10.0% | 554,109 | 553,417 |
Active Idle | 0 | 0 |