Dell Inc. PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) | SPECpower_ssj2008 = 10,802 overall ssj_ops/watt | ||||
Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Mar 28, 2016 |
Hardware Availability: | Mar-2016 | Software Availability: | Apr-2015 | Publication: | Apr 15, 2016 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.4% | 3,341,589 | 269 | 12,429 |
90% | 90.4% | 3,038,834 | 236 | 12,852 |
80% | 79.7% | 2,679,252 | 205 | 13,098 |
70% | 69.6% | 2,340,874 | 182 | 12,844 |
60% | 60.0% | 2,016,068 | 166 | 12,180 |
50% | 50.0% | 1,680,601 | 152 | 11,040 |
40% | 40.1% | 1,347,418 | 138 | 9,735 |
30% | 30.0% | 1,009,827 | 122 | 8,263 |
20% | 19.9% | 670,112 | 105 | 6,367 |
10% | 10.0% | 337,218 | 88.4 | 3,815 |
Active Idle | 0 | 44.9 | 0 | |
∑ssj_ops / ∑power = | 10,802 |
Set Identifier: | sut |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | PowerEdge R730 |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc. |
Model: | PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) |
Form Factor: | 2U |
CPU Name: | Intel Xeon E5-2699 v4 2.20 GHz |
CPU Characteristics: | 22 core, 2.20 GHz, 55 MB L3 Cache |
CPU Frequency (MHz): | 2200 |
CPU(s) Enabled: | 44 cores, 2 chips, 22 cores/chip |
Hardware Threads: | 88 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 55 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 128 |
# and size of DIMM: | 8 x 16 GB |
Memory Details: | 16GB 2Rx8 PC4-2400T ECC; Dell p/n HNDJ7, Slots A1-4,B1-4 populated. |
Power Supply Quantity and Rating (W): | 1 x 750 |
Power Supply Details: | Dell p/n KNHJV |
Disk Drive: | 1 x 120 GB SATA SSD, Dell p/n KX83R |
Disk Controller: | Native Chipset SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720, Dell P/N FM487 |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Power saver power plan in OS |
Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
OS Version: | Version 6.3.9600.17196 |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
JVM Command-line Options: | -server -Xmx1024m -Xms1024m -Xmn800m -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=4 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+OptimizeStringConcat -XX:+UseStringCache -XX:+AggressiveOpts |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000,0x30000,0xC0000,0x300000] |
JVM Instances: | 44 |
JVM Initial Heap (MB): | 1024 |
JVM Maximum Heap (MB): | 1024 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 2.0.1 |
Management Firmware Version: | 2.30.30.30 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | none |
Hardware | |
---|---|
Hardware Vendor: | Dell Inc |
Model: | PowerEdge R410 |
CPU Description: | Intel Xeon E5160, 3.00 GHz |
Memory amount (GB): | 8.0 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Hotspot(TM) Client VM, version 1.8.0_73 |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
Model: | WT210 |
Serial Number: | 91K308530 |
Connectivity: | RS-232 |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | SIMCO |
Calibration Label: | 6995453 |
Date of Calibration: | 6-Jul-2015 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.8.0-efc0c004-20160120 |
Setup Description: | Connected to power supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.10.26.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 25 mm in front of SUT main airflow intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 269 | 20.8 |
90% | 236 | 20.9 |
80% | 205 | 20.9 |
70% | 182 | 20.9 |
60% | 166 | 20.9 |
50% | 152 | 20.9 |
40% | 138 | 20.8 |
30% | 122 | 20.8 |
20% | 105 | 20.7 |
10% | 88.4 | 20.6 |
Active Idle | 44.9 | 20.5 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 20.5 | 255 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 3,375,414 | ||
Calibration 2 | 3,392,299 | ||
Calibration 3 | 3,332,626 | ||
ssj_ops@calibrated=3,362,463 | |||
100% | 99.4% | 3,362,463 | 3,341,589 |
90% | 90.4% | 3,026,216 | 3,038,834 |
80% | 79.7% | 2,689,970 | 2,679,252 |
70% | 69.6% | 2,353,724 | 2,340,874 |
60% | 60.0% | 2,017,478 | 2,016,068 |
50% | 50.0% | 1,681,231 | 1,680,601 |
40% | 40.1% | 1,344,985 | 1,347,418 |
30% | 30.0% | 1,008,739 | 1,009,827 |
20% | 19.9% | 672,493 | 670,112 |
10% | 10.0% | 336,246 | 337,218 |
Active Idle | 0 | 0 |