SPECpower_ssj2008

Hewlett-Packard Company ProLiant DL560 Gen9			SPECpower_ssj2008 = NC overall ssj_ops/watt
Test Sponsor:	Hewlett-Packard Company	SPEC License #:	3	Test Method:	Single Node
Tested By:	Hewlett-Packard Company	Test Location:	Houston, TX, USA	Test Date:	Jul 7, 2015
Hardware Availability:	Jun-2015	Software Availability:	Jun-2013	Publication:	Sep 29, 2015
System Source:	Single Supplier	System Designation:	Server	Power Provisioning:	Line-powered

SPEC has determined that this result is not in compliance with the SPECpower_ssj2008 run and reporting rules. Specifically, this result has been marked as Non-Compliant because more than three years elapsed between the Java Runtime Environment General Availability date and the processor General Availability, and more than four years between the Operating System General Availability and the processor General Availability. Replacement results can be found at: http://www.spec.org/power_ssj2008/results/res2016q2/power_ssj2008-20160607-00734.html

System Under Test

Set: 'SUT'

Set Identifier:	SUT
Set Description:	System Under Test
# of Identical Nodes:	1
Comment:	SUT

Hardware
Hardware Vendor:	Hewlett-Packard Company
Model:	ProLiant DL560 Gen9
Form Factor:	2U
CPU Name:	Intel Xeon E5-4669 v3 2.10 GHz
CPU Characteristics:	18-Core, 2.10 GHz, 45MB L3 Cache
CPU Frequency (MHz):	2100
CPU(s) Enabled:	72 cores, 4 chips, 18 cores/chip
Hardware Threads:	144 (2 / core)
CPU(s) Orderable:	1,2,4 chips
Primary Cache:	32 KB I + 32 KB D on chip per core
Secondary Cache:	256 MB I+D on chip per core
Tertiary Cache:	45 MB I+D on chip per chip
Other Cache:	None
Memory Amount (GB):	128
# and size of DIMM:	16 x 8182 MB
Memory Details:	8GB 2Rx8 PC4-2133P-R; slots 1, 4, 9 and 12 for each processor
Power Supply Quantity and Rating (W):	1 x 1200
Power Supply Details:	656364-B21
Disk Drive:	1 x 100GB SSD SATA (691862-B21)
Disk Controller:	Smart Array P420i RAID controller (embedded)
# and type of Network Interface Cards (NICs) Installed:	1 x HP Ethernet 1Gb 4-port 331FLR Adapter
NICs Enabled in Firmware / OS / Connected:	4/1/1
Network Speed (Mbit):	1000
Keyboard:	None
Mouse:	None
Monitor:	None
Optical Drives:	No
Other Hardware:	None

Software
Power Management:	Enabled (see SUT Notes)
Operating System (OS):	Microsoft Windows Server 2008 R2 Enterprise SP1
OS Version:	Version 6.1.7601 Service Pack 1 Build 7601
Filesystem:	NTFS
JVM Vendor:	IBM Corporation
JVM Version:	IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 amd64-64 20120322_106209 (JIT enabled, AOT enabled))
JVM Command-line Options:	-Xmn825m -Xms950m -Xmx950m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads4
JVM Affinity:	start /node [0, 1, 2, 3] /affinity [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000,0x30000,0xC0000,0x300000,0xC00000,0x3000000,0xC000000,0x30000000,0xC0000000,0x300000000,0xC00000000]
JVM Instances:	72
JVM Initial Heap (MB):	950
JVM Maximum Heap (MB):	950
JVM Address Bits:	64
Boot Firmware Version:	P85 1.40 05/06/2015
Management Firmware Version:	2.30 pass 22
Workload Version:	SSJ 1.2.10
Director Location:	Controller
Other Software:	IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206)

Boot Firmware Settings

USB Control - External USB Ports Disabled
Boot Options - Legacy BIOS Mode
Power Regulator = OS Control Mode
HP Power Profile = Balanced Power and Performance
Maximum Memory Bus Frequency = Auto
Dynamic Power Savings Mode Response = Slow
Collaborative Control = Enabled
Redundant Power Supply Mode = Balanced Mode
Intel Turbo Boost Technology = Disabled
Node Interleaving = Disabled
HW Prefetcher = Disabled
Adjacent Sector Prefetch = Disabled
DCU Streamer Prefetcher = Disabled
NUMA Group Size Optimization = Clustered
Embedded: SATA Controller #2 = Disabled
Memory Patrol Scrubbing = Disabled
Memory Refresh Rate = 1x Refresh

Management Firmware Settings

See SUT Notes

System Under Test Notes

Turn off hard disk after 1 minute
Display set to turn off after 1 minute
Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark.
Run initiated via Windows Remote Desktop Connection
SPECpower_ssj.props input.load_level.number_warehouses set to 144 to detect the full number of available processors on the SUT
Microsoft Hotfix KB2510206 has been installed due to known problems of the group assignment algorithm which does not create a balanced group assignment. For more information see: http://support.microsoft.com/kb/2510206

Controller System

Hardware
Hardware Vendor:	Hewlett-Packard Company
Model:	ProLiant DL360 G7
CPU Description:	Intel Xeon X5675
Memory amount (GB):	32

Software
Operating System (OS):	Windows Server 2012 SP2 - V6.2 9200
JVM Vendor:	Oracle Corporation
JVM Version:	1.8.0_05-b13 (build 25.5-b02, mixed mode)
CCS Version:	1.2.6

Measurement Devices

Power Analyzer pwr1
Hardware Vendor:	Yokogawa
Model:	WT210
Serial Number:	91K112851
Connectivity:	GPIB vi NI GPIB-USB-HS
Input Connection:	Default
Metrology Institute:	NIST
Accredited by:	HP Metrology
Calibration Label:	705948
Date of Calibration:	11-Mar-2015
PTDaemon Host System:	same as CCS
PTDaemon Host OS:	same as CCS
PTDaemon Version:	1.7.1-6ff11330-20150212
Setup Description:	SUT Power Supply 1

Temperature Sensor temp1
Hardware Vendor:	Digi International Inc.
Model:	Watchport/H
Driver Version:	5.70.105.0
Connectivity:	USB
PTDaemon Host System:	same as CCS
PTDaemon Host OS:	same as CCS
Setup Description:	5 mm in front of SUT main intake

Notes

None

http://www.spec.org - info@spec.org

SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]