SPECpower_ssj2008
Copyright © 2007-2012 Standard Performance Evaluation Corporation
| Dell Inc. PowerEdge R420 (Intel Xeon E5-2470, 2.30 GHz) | SPECpower_ssj2008 = 5,420 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Oct 22, 2012 |
| Hardware Availability: | Oct-2012 | Software Availability: | Jun-2012 | Publication: | Nov 14, 2012 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 98.9% | 1,511,097 | 263 | 5,750 |
| 90% | 89.9% | 1,374,059 | 222 | 6,188 |
| 80% | 80.1% | 1,223,446 | 192 | 6,376 |
| 70% | 69.9% | 1,068,676 | 171 | 6,256 |
| 60% | 59.9% | 915,119 | 146 | 6,270 |
| 50% | 50.0% | 764,363 | 128 | 5,993 |
| 40% | 39.9% | 609,107 | 114 | 5,322 |
| 30% | 29.9% | 457,364 | 98.0 | 4,667 |
| 20% | 20.1% | 307,187 | 84.7 | 3,628 |
| 10% | 10.0% | 152,719 | 75.3 | 2,028 |
| Active Idle | 0 | 53.3 | 0 | |
| ∑ssj_ops / ∑power = | 5,420 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge R420 |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R420 (Intel Xeon E5-2470, 2.30 GHz) |
| Form Factor: | 1U |
| CPU Name: | Intel Xeon E5-2470 (Intel Turbo Boost Technology up to 3.10 GHz ) |
| CPU Characteristics: | 8 core, 2.30GHz, 20MB L3 Cache |
| CPU Frequency (MHz): | 2300 |
| CPU(s) Enabled: | 16 cores, 2 chips, 8 cores/chip |
| Hardware Threads: | 32 (2 / core) |
| CPU(s) Orderable: | 1, 2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 20 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 24 |
| # and size of DIMM: | 6 x 4096 MB |
| Memory Details: | 4GB 2Rx8 PC3L-10600E-9 ECC; Slots A1-3,B1-3 populated |
| Power Supply Quantity and Rating (W): | 1 x 550 |
| Power Supply Details: | Dell P/N RYMG6 |
| Disk Drive: | 1 x 100GB SATA SSD, Dell P/N DYW42 |
| Disk Controller: | Integrated PERC S110 |
| # and type of Network Interface Cards (NICs) Installed: | Integrated 1 x dual-port Broadcom 5720 |
| NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Power Saver plan in OS |
| Operating System (OS): | Microsoft Windows Server 2008 x64 Enterprise Edition |
| OS Version: | R2 SP1 |
| Filesystem: | NTFS |
| JVM Vendor: | IBM Corporation |
| JVM Version: | IBM J9 VM (build 2.6,JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 (JIT enabled, AOT enabled) |
| JVM Command-line Options: | -Xaggressive -Xcompressedrefs -Xmx1024m -Xms1024m -Xmn800m -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgcthreads4 |
| JVM Affinity: | start /affinity [3,C,30,C0,300,C00,3000,C000,30000,C0000,300000,C00000,3000000,C000000,30000000,C0000000,] |
| JVM Instances: | 16 |
| JVM Initial Heap (MB): | 1024 |
| JVM Maximum Heap (MB): | 1024 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 1.3.5 |
| Management Firmware Version: | 1.22.23 (Build 1) |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | IBM SDK Java Technology Edition Version 7.0 for Windows x64 |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | Poweredge 1950 |
| CPU Description: | Intel Xeon E5470, 3.33 GHz |
| Memory amount (GB): | 8.0 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2003 Enterprise Edition Service Pack 2 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 1.6.0_32 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT210 |
| Serial Number: | 91KA25149 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | SIMCO |
| Calibration Label: | 5477872 |
| Date of Calibration: | 16-Dec-2011 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.4.2-bc965ca0-20120417 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.30.2.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 263 | 21.1 |
| 90% | 222 | 21.1 |
| 80% | 192 | 21.1 |
| 70% | 171 | 21.1 |
| 60% | 146 | 21.2 |
| 50% | 128 | 21.2 |
| 40% | 114 | 21.2 |
| 30% | 98.0 | 21.2 |
| 20% | 84.7 | 21.1 |
| 10% | 75.3 | 21.1 |
| Active Idle | 53.3 | 21.1 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 21.1 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 1,444,259 | ||
| Calibration 2 | 1,526,611 | ||
| Calibration 3 | 1,529,494 | ||
| ssj_ops@calibrated=1,528,052 | |||
| 100% | 98.9% | 1,528,052 | 1,511,097 |
| 90% | 89.9% | 1,375,247 | 1,374,059 |
| 80% | 80.1% | 1,222,442 | 1,223,446 |
| 70% | 69.9% | 1,069,637 | 1,068,676 |
| 60% | 59.9% | 916,831 | 915,119 |
| 50% | 50.0% | 764,026 | 764,363 |
| 40% | 39.9% | 611,221 | 609,107 |
| 30% | 29.9% | 458,416 | 457,364 |
| 20% | 20.1% | 305,610 | 307,187 |
| 10% | 10.0% | 152,805 | 152,719 |
| Active Idle | 0 | 0 | |
