Supermicro Inc. System 1027B-URF | SPECpower_ssj2008 = 3,913 overall ssj_ops/watt | ||||
Test Sponsor: | Supermicro Inc. | SPEC License #: | 1176 | Test Method: | Single Node |
Tested By: | Supermicro Inc. | Test Location: | San Jose, CA, USA | Test Date: | Jun 19, 2012 |
Hardware Availability: | Jun-2012 | Software Availability: | Jun-2012 | Publication: | Nov 14, 2012 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.4% | 1,288,201 | 285 | 4,520 |
90% | 89.9% | 1,164,539 | 266 | 4,371 |
80% | 80.0% | 1,036,252 | 217 | 4,770 |
70% | 70.2% | 909,138 | 201 | 4,527 |
60% | 60.1% | 778,913 | 182 | 4,276 |
50% | 50.0% | 647,298 | 162 | 3,994 |
40% | 39.9% | 517,396 | 139 | 3,719 |
30% | 30.2% | 390,700 | 118 | 3,301 |
20% | 20.0% | 259,606 | 101 | 2,579 |
10% | 10.0% | 129,284 | 85.7 | 1,509 |
Active Idle | 0 | 62.4 | 0 | |
∑ssj_ops / ∑power = | 3,913 |
Set Identifier: | 1027B |
Set Description: | 1027B-URF |
# of Identical Nodes: | 1 |
Comment: | Here is a comment for this set. |
Hardware | |
---|---|
Hardware Vendor: | Supermicro Inc. |
Model: | System 1027B-URF |
Form Factor: | 1U |
CPU Name: | Intel Xeon E5-2470 (2.30GHz) |
CPU Characteristics: | 8-Core, 2.30 GHz (Turbo Boost Technology up to 3.10 GHz), 20 MB L3 Cache |
CPU Frequency (MHz): | 2300 |
CPU(s) Enabled: | 16 cores, 2 chips, 8 cores/chip |
Hardware Threads: | 32 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
Tertiary Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 24 |
# and size of DIMM: | 6 x 4096 MB |
Memory Details: | 4GB 2Rx8 PC3-10600E-9-10 slots 1-3-5-7-9-11 populated |
Power Supply Quantity and Rating (W): | 1 x 500 |
Power Supply Details: | Supermicro P/N: PWS-504P-1R |
Disk Drive: | 1 x 250GB SATA 3.0Gb/s 7200RPM Supermicro P/N:HDDT0250-WD2503ABYX |
Disk Controller: | Onboard SATA Intel C602 Chipset |
# and type of Network Interface Cards (NICs) Installed: | 1 x Intel I350 Dual Port Gigabit Ethernet |
NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | KVM |
Mouse: | KVM |
Monitor: | KVM |
Optical Drives: | Yes |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Microsoft Windows Server 2008 Enterprise x64 Edition R2 SP1 |
OS Version: | 6.1.7601 (64-bit) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corp. |
JVM Version: | Java(TM) SE Runtime Environment (build 1.6.0_33-b03) |
JVM Command-line Options: | -server -showversion -Xmx1024m -Xms1024m -Xmn853m -XX:ParallelGCThreads=4 -XX:BiasedLockingStartupDelay=200 -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:LoopUnrollLimit=45 -XX:+UseCompressedStrings -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:-UseAdaptiveSizePolicy |
JVM Affinity: | start /affinity [3, C, 30, C0, 300, C00, 3000, C000, 30000, C0000, 300000, C00000, 3000000, C000000, 30000000, C0000000] |
JVM Instances: | 16 |
JVM Initial Heap (MB): | 1024 |
JVM Maximum Heap (MB): | 1024 |
JVM Address Bits: | 64 |
Boot Firmware Version: | 5/10/2012 Ver1.0 |
Management Firmware Version: | 1.48 |
Workload Version: | SSJ 1.2.9 |
Director Location: | Controller |
Other Software: | None |
Hardware | |
---|---|
Hardware Vendor: | Supermicro Inc. |
Model: | SYS-1022G-URF |
CPU Description: | AMD Opteron 6220 (3.00GHz) |
Memory amount (GB): | 8 |
Software | |
---|---|
Operating System (OS): | Microsoft Windows Server 2008 Enterprise x64 Edition R2 SP1 |
JVM Vendor: | Oracle Corp. |
JVM Version: | Java(TM) SE Runtime Environment (build 1.6.0_33-b03) |
CCS Version: | 1.2.5 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
Model: | WT210 |
Serial Number: | 91M516275 |
Connectivity: | GPIB |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | SE Laboratories |
Calibration Label: | C56-0082 |
Date of Calibration: | 7-May-2012 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.4.1-1271fb18-20110728 |
Setup Description: | SUT Power Supply |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H Host |
Driver Version: | 5.30 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 1 cm in front of SUT main air intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 285 | 22.4 |
90% | 266 | 22.8 |
80% | 217 | 22.2 |
70% | 201 | 23.4 |
60% | 182 | 22.0 |
50% | 162 | 22.4 |
40% | 139 | 22.4 |
30% | 118 | 22.2 |
20% | 101 | 23.2 |
10% | 85.7 | 22.4 |
Active Idle | 62.4 | 23.2 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 22.0 | 26 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 1,299,580 | ||
Calibration 2 | 1,293,983 | ||
Calibration 3 | 1,297,586 | ||
ssj_ops@calibrated=1,295,784 | |||
100% | 99.4% | 1,295,784 | 1,288,201 |
90% | 89.9% | 1,166,206 | 1,164,539 |
80% | 80.0% | 1,036,628 | 1,036,252 |
70% | 70.2% | 907,049 | 909,138 |
60% | 60.1% | 777,471 | 778,913 |
50% | 50.0% | 647,892 | 647,298 |
40% | 39.9% | 518,314 | 517,396 |
30% | 30.2% | 388,735 | 390,700 |
20% | 20.0% | 259,157 | 259,606 |
10% | 10.0% | 129,578 | 129,284 |
Active Idle | 0 | 0 |