SPECpower_ssj2008
Copyright © 2007-2011 Standard Performance Evaluation Corporation
| Dell Inc. Dell PowerEdge R710 (Intel Xeon X5675, 3.06 GHz) | SPECpower_ssj2008 = 3,214 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | Oct 11, 2011 |
| Hardware Availability: | Feb-2011 | Software Availability: | Apr-2011 | Publication: | Nov 2, 2011 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.8% | 955,936 | 227 | 4,208 |
| 90% | 89.8% | 860,708 | 205 | 4,200 |
| 80% | 80.2% | 768,669 | 187 | 4,119 |
| 70% | 69.8% | 668,881 | 170 | 3,942 |
| 60% | 60.4% | 578,522 | 157 | 3,683 |
| 50% | 49.9% | 478,275 | 147 | 3,257 |
| 40% | 40.0% | 383,208 | 137 | 2,802 |
| 30% | 30.0% | 287,023 | 127 | 2,262 |
| 20% | 19.9% | 190,309 | 117 | 1,633 |
| 10% | 10.0% | 95,754 | 104 | 919 |
| Active Idle | 0 | 62.2 | 0 | |
| ∑ssj_ops / ∑power = | 3,214 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | Dell PowerEdge R710 (Intel Xeon X5675, 3.06 GHz) |
| Form Factor: | 2U |
| CPU Name: | Intel Xeon X5675 |
| CPU Characteristics: | 6 Core, 3.06 GHz |
| CPU Frequency (MHz): | 3066 |
| CPU(s) Enabled: | 12 cores, 2 chips, 6 cores/chip |
| Hardware Threads: | 24 (2 / core) |
| CPU(s) Orderable: | 1,2 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 12 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 24 |
| # and size of DIMM: | 6 x 4096 MB |
| Memory Details: | 4GB 2Rx4 PC3L-10600R ECC |
| Power Supply Quantity and Rating (W): | 1 x 570 |
| Power Supply Details: | Dell P/N VPR1M |
| Disk Drive: | 1 x 50GB SSD 2.5" SATA (Dell PN X2N7H) |
| Disk Controller: | PERC H200 Integrated |
| # and type of Network Interface Cards (NICs) Installed: | 2 x dual-port onboard Broadcom NetXtreme II BCM5709C |
| NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Power Saver Mode in OS (See Notes) |
| Operating System (OS): | Microsoft Windows 2008 Enterprise x64 Edition |
| OS Version: | R2 SP1 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_27 |
| JVM Command-line Options: | -server -Xmx6g -Xms6g -Xmn5g -XX:SurvivorRatio=65 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=8 -XX:AllocatePrefetchDistance=192 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=5500 -XX:MaxInlineSize=220 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseCompressedStrings -XX:+AggressiveOpts |
| JVM Affinity: | start /affinity [FFF, FFF000]] |
| JVM Instances: | 2 |
| JVM Initial Heap (MB): | 6144 |
| JVM Maximum Heap (MB): | 6144 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 6.0.7 |
| Management Firmware Version: | 1.70 Build 21 |
| Workload Version: | SSJ 1.2.6 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R410 |
| CPU Description: | Intel Xeon 5620 |
| Memory amount (GB): | 4 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2008 Enterprise SP2 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Jrockit(R) 1.6.0_02 build R26.4.0-63 (32-bit) |
| CCS Version: | 1.2.4 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Electric International Pte. Ltd. |
| Model: | WT210 |
| Serial Number: | 91KA21979 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Calibration Institute: | NIST |
| Accredited by: | Simco Electronics |
| Calibration Label: | 33427-2598 |
| Date of Calibration: | 08-Nov-2010 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.4.0-7071d9e7 |
| Setup Description: | Connected to SUT power supply 1. |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.30.2.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 50 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 227 | 23.6 |
| 90% | 205 | 23.6 |
| 80% | 187 | 23.5 |
| 70% | 170 | 23.5 |
| 60% | 157 | 23.5 |
| 50% | 147 | 23.6 |
| 40% | 137 | 23.7 |
| 30% | 127 | 23.7 |
| 20% | 117 | 23.7 |
| 10% | 104 | 23.8 |
| Active Idle | 62.2 | 23.6 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 1 wire | 23.5 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 956,812 | ||
| Calibration 2 | 955,171 | ||
| Calibration 3 | 961,107 | ||
| ssj_ops@calibrated=958,139 | |||
| 100% | 99.8% | 958,139 | 955,936 |
| 90% | 89.8% | 862,325 | 860,708 |
| 80% | 80.2% | 766,511 | 768,669 |
| 70% | 69.8% | 670,697 | 668,881 |
| 60% | 60.4% | 574,883 | 578,522 |
| 50% | 49.9% | 479,069 | 478,275 |
| 40% | 40.0% | 383,256 | 383,208 |
| 30% | 30.0% | 287,442 | 287,023 |
| 20% | 19.9% | 191,628 | 190,309 |
| 10% | 10.0% | 95,814 | 95,754 |
| Active Idle | 0 | 0 | |
