SPECpower_ssj2008
Copyright © 2007-2008 Standard Performance Evaluation Corporation
| Fujitsu Siemens Computers PRIMERGY TX150 S6 (Intel Xeon X3360) | SPECpower_ssj2008 = 1,124 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu Siemens Computers | SPEC License #: | 22 | Test Method: | Single Node |
| Tested By: | Fujitsu Siemens Computers | Test Location: | Paderborn, NRW, Germany | Test Date: | May 15, 2008 |
| Hardware Availability: | Mar-2008 | Software Availability: | Apr-2008 | Publication: | Jun 4, 2008 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 100.0% | 186,987 | 107 | 1,744 |
| 90% | 90.3% | 168,917 | 104 | 1,619 |
| 80% | 79.9% | 149,486 | 101 | 1,484 |
| 70% | 70.0% | 130,877 | 96.7 | 1,354 |
| 60% | 60.0% | 112,305 | 91.6 | 1,226 |
| 50% | 50.0% | 93,474 | 85.6 | 1,092 |
| 40% | 39.7% | 74,274 | 78.7 | 944 |
| 30% | 30.2% | 56,398 | 72.0 | 784 |
| 20% | 20.4% | 38,095 | 65.8 | 579 |
| 10% | 9.8% | 18,312 | 59.6 | 307 |
| Active Idle | 0 | 53.1 | 0 | |
| ∑ssj_ops / ∑power = | 1,124 | |||
| Set Identifier: | sut |
| Set Description: | PRIMERGY TX150 S6 (Intel Xeon X3360) |
| # of Identical Nodes: | 1 |
| Comment: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu Siemens Computers |
| Model: | PRIMERGY TX150 S6 (Intel Xeon X3360) |
| Form Factor: | -- |
| CPU Name: | Intel Xeon X3360 |
| CPU Characteristics: | 2.83GHz, 2x6MB L2 Cache, 1333MHz system bus |
| CPU Frequency (MHz): | 2833 |
| CPU(s) Enabled: | 4 cores, 1 chip, 4 cores/chip |
| Hardware Threads: | 4 (1 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 12 MB I+D on chip per chip, 6 MB shared / 2 cores |
| Tertiary Cache: | None |
| Other Cache: | None |
| Memory Amount (GB): | 4 |
| # and size of DIMM: | 2 x 2048 MB |
| Memory Details: | PC2-6400E-666 2Rx8 |
| Power Supply Quantity and Rating (W): | 1 x 350 |
| Power Supply Details: | HIPRO HP-U3528F1 |
| Disk Drive: | 1 x Seagate (3.5", SATA, 7.2krpm, 160GB) |
| Disk Controller: | Integrated SATA controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x Broadcom NetXtreme Gigabit Ethernet (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | KVM |
| Mouse: | KVM |
| Monitor: | KVM |
| Optical Drives: | Yes |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (Server Balanced Processor Power and Performance) |
| Operating System (OS): | Microsoft Windows Server 2003 R2 Enterprise X64 Edition |
| OS Version: | 5.2.3790 Service Pack 1 Build 3790 |
| Filesystem: | NTFS |
| JVM Vendor: | Bea Systems, Inc |
| JVM Version: | BEA JRockit(R) P27.5.0 (build P27.5.0-5-97156-1.6.0_03-20080403-1524-windows-x86_64) |
| JVM Command-line Options: | -Xms1650m -Xmx1650m -Xns1500m -XXaggressive -Xlargepages -Xgc:genpar -XXcallprofiling -XXgcthreads=2 -XXtlasize:min=4k,preferred=512k -XXthroughputcompaction |
| JVM Affinity: | start /AFFINITY [0x3,0xC] |
| JVM Instances: | 4 |
| JVM Initial Heap (MB): | 1650 |
| JVM Maximum Heap (MB): | 1650 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | -- |
| Management Firmware Version: | -- |
| Workload Version: | SSJ 1.1 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu Siemens Computers |
| Model: | PRIMERGY RX100 S3 |
| CPU Description: | Pentium D 940 |
| Memory amount (GB): | 2 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2003 Enterprise Edition + SP1 |
| JVM Vendor: | BEA Systems, Inc. |
| JVM Version: | BEA JRockit(R) R27.5.0 (build R27.5.0-110-94909-1.6.0_03-20080204-1558-windows-ia32) |
| CCS Version: | 1.1 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | ZES Zimmer Electronic Systems GmbH |
| Model: | LMG95 |
| Serial Number: | 11210208 |
| Connectivity: | RS-232 |
| Input Connection: | Default (20A) |
| Calibration Institute: | PTB (Physikalisch Technische Bundesanstalt) |
| Accredited by: | ZES |
| Calibration Label: | 11210802.1f |
| Date of Calibration: | 13-Feb-2008 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.2-13f4b0b4 |
| Setup Description: | -- |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 4.20.0.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | -- |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 107 | 20.9 |
| 90% | 104 | 20.9 |
| 80% | 101 | 20.8 |
| 70% | 96.7 | 20.8 |
| 60% | 91.6 | 20.8 |
| 50% | 85.6 | 20.7 |
| 40% | 78.7 | 20.7 |
| 30% | 72.0 | 20.7 |
| 20% | 65.8 | 20.6 |
| 10% | 59.6 | 20.6 |
| Active Idle | 53.1 | 20.6 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 230V / 50 Hz / 1 phase / 2 wires | 20.6 | 117 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 186,194 | ||
| Calibration 2 | 186,874 | ||
| Calibration 3 | 187,205 | ||
| ssj_ops@calibrated=187,040 | |||
| 100% | 100.0% | 187,040 | 186,987 |
| 90% | 90.3% | 168,336 | 168,917 |
| 80% | 79.9% | 149,632 | 149,486 |
| 70% | 70.0% | 130,928 | 130,877 |
| 60% | 60.0% | 112,224 | 112,305 |
| 50% | 50.0% | 93,520 | 93,474 |
| 40% | 39.7% | 74,816 | 74,274 |
| 30% | 30.2% | 56,112 | 56,398 |
| 20% | 20.4% | 37,408 | 38,095 |
| 10% | 9.8% | 18,704 | 18,312 |
| Active Idle | 0 | 0 | |
