MPI2007 license: | 14 | Test date: | Jun-2016 |
---|---|---|---|
Test sponsor: | SGI | Hardware Availability: | May-2016 |
Tested by: | SGI | Software Availability: | Jun-2016 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
121.pop2 | 896 | 169 | 23.0 | 168 | 23.1 | 168 | 23.1 | |||||||
122.tachyon | 896 | 139 | 14.0 | 139 | 14.0 | 139 | 14.0 | |||||||
125.RAxML | 896 | 131 | 22.3 | 130 | 22.4 | 131 | 22.3 | |||||||
126.lammps | 896 | 122 | 20.1 | 122 | 20.1 | 122 | 20.1 | |||||||
128.GAPgeofem | 896 | 148 | 40.1 | 148 | 40.0 | 148 | 40.0 | |||||||
129.tera_tf | 896 | 84.2 | 13.1 | 84.3 | 13.0 | 84.0 | 13.1 | |||||||
132.zeusmp2 | 896 | 88.0 | 24.1 | 88.1 | 24.1 | 87.7 | 24.2 | |||||||
137.lu | 896 | 78.2 | 53.7 | 78.3 | 53.7 | 78.3 | 53.7 | |||||||
142.dmilc | 896 | 91.7 | 40.2 | 91.7 | 40.2 | 91.7 | 40.2 | |||||||
143.dleslie | 896 | 107 | 29.1 | 109 | 28.5 | 109 | 28.5 | |||||||
145.lGemsFDTD | 896 | 191 | 23.0 | 191 | 23.1 | 192 | 23.0 | |||||||
147.l2wrf2 | 896 | 331 | 24.8 | 329 | 24.9 | 333 | 24.7 |
Hardware Summary | |
---|---|
Type of System: | Homogeneous |
Compute Node: | SGI ICE XA IP-125 CS |
Interconnect: | InfiniBand (MPI and I/O) |
File Server Node: | SGI MIS Server |
Total Compute Nodes: | 16 |
Total Chips: | 32 |
Total Cores: | 448 |
Total Threads: | 896 |
Total Memory: | 2 TB |
Base Ranks Run: | 896 |
Minimum Peak Ranks: | -- |
Maximum Peak Ranks: | -- |
Software Summary | |
---|---|
C Compiler: | Intel C++ Composer XE 2016 for Linux, Version 16.0.3.210 Build 20160415 |
C++ Compiler: | Intel C++ Composer XE 2016 for Linux Version 16.0.3.210 Build 20160405 |
Fortran Compiler: | Intel Fortran Composer XE 2016 for Linux, Version 16.0.3.210 Build 20160405 |
Base Pointers: | 64-bit |
Peak Pointers: | 64-bit |
MPI Library: | SGI MPT 2.14 Patch 11328 |
Other MPI Info: | OFED 3.2.2 |
Pre-processors: | None |
Other Software: | None |
Hardware | |
---|---|
Number of nodes: | 16 |
Uses of the node: | compute |
Vendor: | SGI |
Model: | SGI ICE XA (Intel Xeon E5-2690 v4, 2.6 GHz) |
CPU Name: | Intel Xeon E5-2690 v4 |
CPU(s) orderable: | 1-2 chips |
Chips enabled: | 2 |
Cores enabled: | 28 |
Cores per chip: | 14 |
Threads per core: | 2 |
CPU Characteristics: | 14 Core, 2.60 GHz, 9.6 GT/s QPI Intel Turbo Boost Technology up to 3.50 GHz Hyper-Threading Technology enabled |
CPU MHz: | 2600 |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 35 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 128 GB (8 x 16 GB 2Rx4 PC4-2400T-R) |
Disk Subsystem: | None |
Other Hardware: | None |
Adapter: | Mellanox MT27700 with ConnectX-4 ASIC (PCIe x16 Gen3 8 GT/s) |
Number of Adapters: | 2 |
Slot Type: | PCIe x16 Gen3 |
Data Rate: | InfiniBand 4X EDR |
Ports Used: | 1 |
Interconnect Type: | InfiniBand |
Software | |
---|---|
Adapter: | Mellanox MT27700 with ConnectX-4 ASIC (PCIe x16 Gen3 8 GT/s) |
Adapter Driver: | OFED-3.2.1.5.3 |
Adapter Firmware: | 12.14.0114 |
Operating System: | SUSE Linux Enterprise Server 11 SP4 (x86_64), Kernel 3.0.101-71.1.10690.1.PTF-default |
Local File System: | NFSv3 |
Shared File System: | NFSv3 IPoIB |
System State: | Multi-user, run level 3 |
Other Software: | SGI Tempo Compute Node 3.3.0, Build 714r18.sles11sp4-1604041900 |
Hardware | |
---|---|
Number of nodes: | 1 |
Uses of the node: | fileserver |
Vendor: | SGI |
Model: | SGI MIS Server |
CPU Name: | Intel Xeon E5-2670 |
CPU(s) orderable: | 1-2 chips |
Chips enabled: | 2 |
Cores enabled: | 16 |
Cores per chip: | 8 |
Threads per core: | 1 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.30 GHz Hyper-Threading Technology disabled |
CPU MHz: | 1200 |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 128 GB (12 * 8 GB 2Rx4 PC3-12800R-11, ECC) |
Disk Subsystem: | 45 TB RAID 6 8 x 6+2 900GB (WD, 10K RPM) |
Other Hardware: | None |
Adapter: | Mellanox MT27500 with ConnectX-3 ASIC |
Number of Adapters: | 2 |
Slot Type: | PCIe x8 Gen3 |
Data Rate: | InfiniBand 4X FDR |
Ports Used: | 2 |
Interconnect Type: | InfiniBand |
Software | |
---|---|
Adapter: | Mellanox MT27500 with ConnectX-3 ASIC |
Adapter Driver: | OFED-3.2.0.1.1 |
Adapter Firmware: | 2.36.5000 |
Operating System: | SUSE Linux Enterprise Server 11 (x86_64), Kernel 3.0.101-0.46-default |
Local File System: | xfs |
Shared File System: | -- |
System State: | Multi-user, run level 3 |
Other Software: | SGI Foundation Software 2.9, Build 711r2.sles11sp3-1411192056 |
Hardware | |
---|---|
Vendor: | Mellanox Technologies and SGI |
Model: | None |
Switch Model: | SGI P0002145 |
Number of Switches: | 4 |
Number of Ports: | 36 |
Data Rate: | InfiniBand 4x EDR |
Firmware: | 11.0350.0394 |
Topology: | Enhanced Hypercube |
Primary Use: | MPI and I/O traffic |
The config file option 'submit' was used.
Software environment: export MPI_REQUEST_MAX=65536 export MPI_TYPE_MAX=32768 export MPI_IB_RAILS=2 export MPI_IB_UPGRADE_SENDS=50 export MPI_IB_IMM_UPGRADE=false export MPI_IB_DCIS=2 export MPI_CONNECTIONS_THRESHOLD=0 export MPI_IB_MTU=4096 ulimit -s unlimited BIOS settings: AMI BIOS version HA012036 Hyper-Threading Technology enabled Intel Turbo Boost Technology enabled (default) Transparent Hugepages Enabled Job Placement: Each MPI job was assigned to a topologically compact set of nodes with 28 ranks per socket. Additional notes regarding interconnect: The Infiniband network consists of two independent planes, with half the switches in the system allocated to each plane. I/O traffic is restricted to one plane, while MPI traffic can use both planes.
icc |
126.lammps: | icpc |
ifort |
icc ifort |
121.pop2: | -DSPEC_MPI_CASE_FLAG |