# Invocation command line: # /mpi/bin/runspec -c huawei.cfg -F EM64T_Huawei_flags.xml --ranks=32 medium # output_root was not used for this run ############################################################################ # Invocation command line: # /home/burton/MPI2007/bin/runspec --config config.snb --size mref --iterations 6 --output_format=all --reportable --flagsurl EM64T_Intel121_flags.xml --ranks=256 medium # output_root was not used for this run ############################################################################ ##################################################################### # # Config file to run SPEC MPI2007 with Intel Software Toolchain # (Intel Compiler 12.0 and Intel MPI 4.0.3) # ##################################################################### env_vars = 1 basepeak = 1 reportable = 1 ignore_errors = 0 iterations = 3 makeflags = -j 4 tune = base size = mref use_version_url = 1 #ext=zjg version_url = version.txt use_submit_for_speed = 1 output_format = all FC = mpiifort CC = mpiicc CXX = mpiicpc ##################################################################### # Portability flags ##################################################################### 121.pop2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG 126.lammps=default=default=default: CXXPORTABILITY = -DMPICH_IGNORE_CXX_SEEK 127.wrf2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX 130.socorro=default=default=default: srcalt=nullify_ptrs FPORTABILITY = -assume nostd_intent_in ################################################################# # Optimization flags ################################################################# default=default=default=default: OPTIMIZE = -O3 -xAVX -no-prec-div submit = mpiexec.hydra -f /mpi/nodes -genv I_MPI_DEVICE rdssm -genv I_MPI_FALLBACK_DEVICE disable -n $ranks $command ################################################################# # Notes ################################################################# test_sponsor = Huawei license_num = 24 tester = Huawei hw_avail = Mar-2012 sw_avail = Oct-2012 prepared_by = Huawei system_vendor = Huawei node_compute_hw_adapter_ib_model = MCX353A-QCBT interconnect_ib_hw_switch_IS5025_model = 1U IB Switch node_compute_sw_other = None system_name000 = Tecal RH2288 V2 (Intel Xeon E5-2680, 2.70 GHz, system_name001 = DDR3-1333 MHz) # # Computation node info # node_compute_label = RH2288 V2 node_compute_order = 1 node_compute_count = 2 node_compute_purpose = compute node_compute_hw_vendor = Huawei node_compute_hw_model000= Tecal RH2288 V2 node_compute_hw_model001 = rack server node_compute_hw_cpu_name = Intel Xeon E5-2680 node_compute_hw_ncpuorder = 1-2 chips node_compute_hw_nchips = 2 node_compute_hw_ncores = 16 node_compute_hw_ncoresperchip = 8 node_compute_hw_nthreadspercore = 1 node_compute_hw_cpu_char000 = Intel Turbo Boost Technology up to 3.5 GHz, node_compute_hw_cpu_char001 = 8.0 GT/s QPI, Hyper-Threading disabled node_compute_hw_cpu_mhz = 2700 node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_scache = 256 KB I+D on chip per core node_compute_hw_tcache = 20 MB I+D on chip per chip, 20 MB shared / 8 cores node_compute_hw_ocache = None node_compute_hw_memory = 64 GB (8 x 8 GB 2Rx4 PC3-10600R-11, ECC) node_compute_hw_disk = Seagate ST9146803SS, 146 GB SAS 10K RPM node_compute_hw_other = None node_compute_hw_adapter_ib_count = 1 node_compute_hw_adapter_ib_slot_type = PCIe x8 Gen2 node_compute_hw_adapter_ib_data_rate = InfiniBand 4x QDR node_compute_hw_adapter_ib_ports_used = 1 node_compute_hw_adapter_ib_interconnect = InfiniBand node_compute_hw_adapter_ib_driver = MLNX_OFED_LINUX-1.5.3-3.1.0-rhel6.2-x86_64 node_compute_hw_adapter_ib_firmware = 2.11.500 node_compute_hw_adapter_fs_model000= Onboard Intel 82580 node_compute_hw_adapter_fs_model001 = Ethernet Controller node_compute_hw_adapter_fs_count = 1 node_compute_hw_adapter_fs_slot_type = PCI-Express x8 node_compute_hw_adapter_fs_data_rate = 1Gbps Ethernet node_compute_hw_adapter_fs_ports_used = 1 node_compute_hw_adapter_fs_interconnect = Ethernet node_compute_hw_adapter_fs_driver = 3.0.6-k node_compute_hw_adapter_fs_firmware = 3.2-9 node_compute_sw_os = Red Hat EL 6.2, kernel 2.6.32-220.el6.x86_64 node_compute_sw_localfile = Linux/ext4 node_compute_sw_sharedfile = NFS node_compute_sw_state = Multi-User # # Fileserver node info # node_fileserver_label = Tecal RH2285 node_fileserver_order = 2 node_fileserver_count = 1 node_fileserver_purpose = fileserver node_fileserver_hw_vendor = Huawei node_fileserver_hw_model = Tecal RH2285 node_fileserver_hw_cpu_name = Intel Xeon X5670 CPU node_fileserver_hw_ncpuorder = 1-2 chips node_fileserver_hw_nchips = 2 node_fileserver_hw_ncores = 12 node_fileserver_hw_ncoresperchip = 6 node_fileserver_hw_nthreadspercore = 1 node_fileserver_hw_cpu_char = N/A node_fileserver_hw_cpu_mhz = 2930 node_fileserver_hw_pcache = 32 KB I + 32 KB D on chip per core node_fileserver_hw_scache = 256 KB I+D on chip per core node_fileserver_hw_tcache = 12 MB I+D on chip per chip node_fileserver_hw_ocache = None node_fileserver_hw_memory = 32 GB node_fileserver_hw_disk = 1 x 500 GB SATA 7200 RPM node_fileserver_hw_other = None node_fileserver_hw_adapter_fs_model000 = Dual port Broadcom BCM 5709 node_fileserver_hw_adapter_fs_model001 = Ethernet Controller node_fileserver_hw_adapter_fs_count = 1 node_fileserver_hw_adapter_fs_slot_type = Integrated node_fileserver_hw_adapter_fs_data_rate = 1Gbps Ethernet node_fileserver_hw_adapter_fs_ports_used = 1 node_fileserver_hw_adapter_fs_interconnect = Ethernet node_fileserver_hw_adapter_fs_driver = 2.2.3 node_fileserver_hw_adapter_fs_firmware = 4.6.4 node_fileserver_sw_os = Red Hat EL 6.2, kernel 2.6.32-220.el6.x86_64 node_fileserver_sw_localfile = None node_fileserver_sw_sharedfile = NFS node_fileserver_sw_state = Multi-User node_fileserver_sw_other = None # # IB interconnect # interconnect_ib_label = IB Switch interconnect_ib_order = 1 interconnect_ib_purpose = MPI traffic interconnect_ib_hw_vendor = Mellanox interconnect_ib_hw_model = Mellanox IS5025 interconnect_ib_hw_switch_IS5025_count = 1 interconnect_ib_hw_switch_IS5025_ports = 36 interconnect_ib_hw_topo = Fat tree interconnect_ib_hw_switch_IS5025_data_rate = InfiniBand 4x QDR interconnect_ib_hw_switch_IS5025_firmware = 7.4.0000 # # Cluster file system interconnect # interconnect_fs_label = Gigabit Ethernet interconnect_fs_order = 2 interconnect_fs_purpose = Cluster File System interconnect_fs_hw_vendor = Huawei interconnect_fs_hw_model = Quidway S5328 interconnect_fs_hw_switch_fs_model= Quidway S5328 interconnect_fs_hw_switch_fs_count = 1 interconnect_fs_hw_switch_fs_ports = 28 interconnect_fs_hw_topo = Fat tree interconnect_fs_hw_switch_fs_data_rate = 1Gbps Ethernet interconnect_fs_hw_switch_fs_firmware = 5.1.2 # # Hardware # system_class = Homogeneous max_ranks = 16 max_peak_ranks = 16 # # Software # sw_c_compiler000= Intel C++ Composer XE for Linux, Version sw_c_compiler001 = 13.0.1.117 Build 20121010 sw_cxx_compiler000= Intel C++ Composer XE for Linux, Version sw_cxx_compiler001 = 13.0.1.117 Build 20121010 sw_f_compiler000= Intel Fortran Composer XE for Linux, Version sw_f_compiler001 = 13.0.1.117 Build 20121010 sw_auto_parallel = sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_mpi_library000= Intel MPI Library 4.1 Build 20120831 for sw_mpi_library001 = Linux sw_mpi_other = None sw_preprocessors = No sw_other = None # # General notes # notes_010 = MPI startup command: notes_015 = mpiexec.hydra command was used to start MPI jobs. notes_020 = notes_025 = BIOS settings: notes_030 = Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled) notes_035 = Intel Turbo Boost Technology (Turbo) : Enabled (default is Enabled) notes_040 = notes_045 = RAM configuration: notes_050 = Compute nodes have 1x8-GB RDIMM on each memory channel. notes_055 = notes_060 = Network: notes_065 = One 20-port switch notes_070 = notes_075 = Compute Node Environment: notes_080 = ulimit -s = unlimited notes_085 = ulimit -l = unlimited notes_090 = File "/etc/modprobe.d/mlx4_core.conf" modified to contain "options notes_095 = mlx4_core log_mtts_per_seg=5" notes_100 = notes_105 = notes_110 = notes_115 = notes_120 = notes_125 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/mpi2007/flags/EM64T_Huawei_flags.xml notes_000 =130.socorro (base): "nullify_ptrs" src.alt was used. notes_005 = notes_submit_000 =mpiexec.hydra -f /mpi/nodes -genv I_MPI_DEVICE rdssm notes_submit_005 =-genv I_MPI_FALLBACK_DEVICE disable -n $ranks $command