SPECint95

IBM Corporation

RS/6000 SP-222 MHz High Node (1 CPU)

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	301	15.3	297	15.5
124.m88ksim	1900	134	14.2	129	14.7
126.gcc	1700	139	12.3	137	12.4
129.compress	1800	132	13.6	118	15.2
130.li	1900	159	12.0	145	13.1
132.ijpeg	2400	169	14.2	173	13.9
134.perl	1900	204	9.32	149	12.7
147.vortex	2700	210	12.9	194	13.9
SPECint_base95			12.8
		SPECint95			13.9

Tester Information:

SPEC License #:	11
Tested By:	IBM, Austin, TX
Test Date:	Oct-99
Hardware Avail:	Oct-99
Software Avail:	Sep-99

Hardware Information:

Model Name:	RS/6000 SP-222 MHz High Node (1 CPU)
CPU:	222 MHz POWER3
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	32KB I + 64KB D (on chip)
Secondary Cache:	4MB unified (off chip)
Other Cache:	None
Memory:	8 GB
Disk Subsystem:	2 x 18.2GB
Other Hardware:	None

Software Information:

Operating System:	AIX 4.3.3
Compiler:	IBM C/C++ 3.6.4.0
	memdbg 4.4.0.1
	FDPR
File System:	AIX/JFS
System State:	Multi-user

Notes:

Portability Flags: gcc -ma; perl -DI_TIME -DI_SYS_TIME
Base:   -O4 -Q=500 -qpdf1/pdf2 -lhmu
Peak
go:     -O -qarch=pwr3 -Q=500 -qansialias -qdatalocal -qassert=addr -qcompact -bnso -bI:/lib/syscalls.exp
m88:    -O3 -qarch=ppc -qipa=noobject -Q=500 -qansialias -qpdf1/pdf2
gcc:    -O -qarch=ppc -qdatalocal -qassert=addr -qinlglue -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp
comp:   -O -qarch=ppc -qipa=level=2:noobject -qdatalocal -Q=200 -qassert=allp -qunroll=5
li:     -O4 -qipa=noobject -qlibansi -qpdf1/pdf2; fdpr -R3
ijpeg:  -O4 -qipa=noobject -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp
perl:   -O4 -qipa=noobject -Q=200 -qinlglue -Dsetjmp=_setjmp -Dlongjmp=_longjmp -qansialias -qunroll=4
-qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp /usr/ccs/lib/bmalloc.o
vort:   -O4 -qipa=level=2:noobject -Q=500 -qpdf1/pdf2 -lhm -lhu; fdpr -R2
NOTE: 2 CPUs were installed, but only 1 was enabled. The service processor menu
.     was used to disable one of the processors.

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 23-Nov-1999