This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 27.0 |
---|---|
SPECfp_base95 | 25.1 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 88.4 | 41.9 | 68 | 54.2 |
102.swim | 8600 | 180 | 47.8 | 142 | 60.5 |
103.su2cor | 1400 | 86.0 | 16.3 | 84 | 16.6 |
104.hydro2d | 2400 | 116 | 20.7 | 110 | 21.8 |
107.mgrid | 2500 | 107 | 23.3 | 108 | 23.2 |
110.applu | 2200 | 120 | 18.4 | 120 | 18.4 |
125.turb3d | 4100 | 159 | 25.7 | 159 | 25.8 |
141.apsi | 2100 | 98.6 | 21.3 | 97 | 21.7 |
145.fpppp | 9600 | 318 | 30.2 | 309 | 31.1 |
146.wave5 | 3000 | 144 | 20.8 | 127 | 23.7 |
SPECfp_base95 | 25.1 | ||||
SPECfp95 | 27.0 |
Tester Information:
SPEC License #: | 11 |
---|---|
Tested By: | IBM, Austin, TX |
Test Date: | Jul-99 |
Hardware Avail: | Oct-98 |
Software Avail: | Jul-99 |
Hardware Information:
Model Name: | RS/6000 43P-260 (1 CPU) |
---|---|
CPU: | 200 MHz POWER3 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 32KB I + 64KB D (on chip) |
Secondary Cache: | 4MB unified (off chip) |
Other Cache: | None |
Memory: | 512 MB |
Disk Subsystem: | 1 x 4.5GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | AIX 4.3.2 |
---|---|
Compiler: | XL Fortran version 6.1.0.0 |
KAP version 3.2 | |
VAST-2 version 4.01X8 | |
File System: | AIX/JFS |
System State: | Multi-user |
Notes:
Base: -O4 -qipa=level=2:noobject -lmass Peak 101: -O4 -qipa=level=2:noobject -qhot=arraypad=52 -bnso -bI:/lib/syscalls.exp 102: -O4 -qipa=level=2:noobject -qhot=arraypad=28 -qstrict -qpdf1/pdf2 -lmass 103: -O4 -qipa=level=2:noobject -qhot=arraypad=44 -Pv -Wp,-ew,-o -lmass -bnso -bI:/lib/syscalls.exp 104: -O3 -qarch=pwr3 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp 107: -O4 -qipa=level=2:noobject -lmass -bnso -bI:/lib/syscalls.exp; fdpr -R2 110: -O4 -qipa=level=2:noobject -qnosave -lmass 125: -O4 -qipa=level=2:noobject -qnosave -lmass 141: -O3 -qhot -qtbtable=none -qarch=pwr3 -qnosave -lmass -bnso -bI:/lib/syscalls.exp 145: -O4 -Q -Pv -Wp,-ea27,-o -1 -qnosave -qmaxmem=-1 -qpdf1/pdf2 -lmass -bnso -bI:/lib/syscalls.exp 146: -O3 -qarch=pwr3 -Pk -Wp,-ag=a,-f -qxlf77=nopersistent -lmass -bnso -bI:/lib/syscalls.exp NOTE: This result applies only to 43P-260 systems running the SPX99028 . firmware level. For all other configurations, the previously . published results are valid.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Wed Sep 15 16:30:12 1999First published at SPEC.org on 15-Sep-1999