This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECint_rate95 | 112 |
---|---|
SPECint_rate_base95 | 104 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
099.go | 1 | 341 | 121 | 1 | 335 | 124 |
124.m88ksim | 1 | 154 | 111 | 1 | 151 | 113 |
126.gcc | 1 | 150 | 102 | 1 | 147 | 104 |
129.compress | 1 | 143 | 113 | 1 | 124 | 131 |
130.li | 1 | 176 | 96.9 | 1 | 162 | 106 |
132.ijpeg | 1 | 195 | 111 | 1 | 200 | 108 |
134.perl | 1 | 230 | 74.3 | 1 | 175 | 97.9 |
147.vortex | 1 | 228 | 106 | 1 | 211 | 115 |
SPECint_rate_base95 | 104 | |||||
SPECint_rate95 | 112 |
Tester Information:
SPEC License #: | 11 |
---|---|
Tested By: | IBM, Austin, TX |
Test Date: | Jul-99 |
Hardware Avail: | Oct-98 |
Software Avail: | Jul-99 |
Hardware Information:
Model Name: | RS/6000 43P-260 (1 CPU) |
---|---|
CPU: | 200 MHz POWER3 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 32KB I + 64KB D (on chip) |
Secondary Cache: | 4MB unified (off chip) |
Other Cache: | None |
Memory: | 512 MB |
Disk Subsystem: | 1 x 4.5GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | AIX 4.3.2 |
---|---|
Compiler: | IBM C/C++ 3.6.4.0 |
memdbg 4.4.0.1 | |
FDPR | |
File System: | AIX/JFS |
System State: | Multi-user |
Notes:
Compatibility Flags: gcc -ma; perl -DI_TIME -DI_SYS_TIME Base: -O4 -Q=500 -qpdf1/pdf2 -lhmu go: -O -qarch=pwr3 -Q=500 -qansialias -qdatalocal -qassert=addr -qcompact -bnso -bI:/lib/syscalls.exp m88: -O3 -qarch=ppc -qipa=noobject -Q=500 -qansialias -qpdf1/pdf2 gcc: -O -qarch=ppc -qdatalocal -qassert=addr -qinlglue -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp comp: -O -qarch=ppc -qipa=level=2:noobject -qdatalocal -Q=200 -qassert=allp -qunroll=5 li: -O4 -qipa=noobject -qlibansi -qpdf1/pdf2; fdpr -R3 ijpeg: -O4 -qipa=noobject -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp perl: -O4 -qipa=noobject -Q=200 -qinlglue -Dsetjmp=_setjmp -Dlongjmp=_longjmp -qansialias -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp /usr/ccs/lib/bmalloc.o vort: -O4 -qipa=level=2:noobject -Q=500 -qpdf1/pdf2 -lhm -lhu; fdpr -R2 NOTE: This result applies only to 43P-260 systems running the SPX99028 . firmware level. For all other configurations, the previously . published results are valid.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Wed Sep 15 16:30:09 1999First published at SPEC.org on 15-Sep-1999