This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 406 |
---|---|
SPECfp_rate_base95 | 376 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 173 | 386 | 2 | 141 | 474 |
102.swim | 2 | 292 | 530 | 2 | 245 | 633 |
103.su2cor | 2 | 101 | 250 | 2 | 92 | 274 |
104.hydro2d | 2 | 175 | 247 | 2 | 173 | 249 |
107.mgrid | 2 | 123 | 366 | 2 | 122 | 369 |
110.applu | 2 | 163 | 243 | 2 | 162 | 245 |
125.turb3d | 2 | 233 | 317 | 2 | 198 | 373 |
141.apsi | 2 | 98.2 | 385 | 2 | 92 | 411 |
145.fpppp | 2 | 253 | 682 | 2 | 253 | 682 |
146.wave5 | 2 | 90.8 | 594 | 2 | 86 | 630 |
SPECfp_rate_base95 | 376 | |||||
SPECfp_rate95 | 406 |
Tester Information:
SPEC License #: | 04 |
---|---|
Tested By: | SGI |
Test Date: | Jul-99 |
Hardware Avail: | Aug-99 |
Software Avail: | Jul-99 |
Hardware Information:
Model Name: | Origin2100: 2X 250MHz R10k |
---|---|
CPU: | 250 MHz MIPS R10000 Processor Chip Revision: 3.4 |
FPU: | Integrated |
Number of CPU(s): | 2 |
Primary Cache: | 32KBI + 32KBD on chip |
Secondary Cache: | 4MB (I+D) |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 1 SCSI 4.3GB |
Other Hardware: | none |
Software Information:
Operating System: | IRIX64 6.5.5 |
---|---|
Compiler: | MIPSpro Fortran 77 and 90 7.3 |
IRIX Development Foundation 1.2 | |
File System: | XFS |
System State: | Multi-User |
Notes:
Base Flags: f90 -Ofast=ip27 -LNO:fusion=2 FEEDBACK FEEDBACK: . PASS1 = -fb_create /tmp/FBDIR/$(EXENAME) . PASS2 = -fb_opt /tmp/FBDIR/$(EXENAME) Peak Flags: tomcatv: f90 -Ofast=ip27 -LNO:prefetch_ahead=1:blocking=off:ou_max=2:local_pad_size=1 swim: f77 -Ofast=ip27 -LNO:fusion=2:prefetch_ahead=1 -IPA:inline=off:pad=off -OPT:ieee_arith=3:ro=3 -bigp_off su2cor: f90 -O3 -n32 -mips4 -TARG:platform=ip27 -TENV:X=3 -LNO:prefetch=0:fusion=2:local_pad_size=0 \ . -OPT:ro=3:ieee_ar=3:unroll_times_max=2:unroll_size=0:unroll_analysis=off hydro2d: f90 -Ofast=ip27 -LNO:fusion=2 -TENV:X=4 mgrid: f90 -Ofast=ip27 -LNO:prefetch_ahead=1 applu f77 -Ofast=ip27 -LNO:fusion=2:ou_max=5:ou_prod_max=10 turb3d f77 -Ofast=ip27 -OPT:ieee_arith=3 -IPA:multi_clone=12:node_bloat=200 -LNO:prefetch=0 apsi f77 -Ofast=ip27 -OPT:div_split -LNO:fusion=2:prefetch=0:blocking=off -bigp_off fpppp: f90 -Ofast=ip27 -LNO:fusion=2 FEEDBACK wave5: f77 -Ofast=ip27 -LNO:fusion=2 -IPA:common_pad_size=13:maxdepth=2 -OPT:unroll_size=400 -bigp_off . Large pages were enabled for base and peak using: . systune -i ; percent_totalmem_1m_pages = 50 ; nlpages_1m = 200 . setenv PAGESIZE_DATA 1024
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Fri Aug 20 16:41:55 1999First published at SPEC.org on 17-Aug-1999