This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 896 |
---|---|
SPECfp_rate_base95 | 837 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 4 | 85.8 | 1552 | 4 | 80 | 1669 |
102.swim | 4 | 146 | 2122 | 4 | 133 | 2332 |
103.su2cor | 4 | 99.7 | 505 | 4 | 101 | 499 |
104.hydro2d | 4 | 113 | 762 | 4 | 111 | 776 |
107.mgrid | 4 | 125 | 719 | 4 | 107 | 841 |
110.applu | 4 | 191 | 414 | 4 | 190 | 417 |
125.turb3d | 4 | 248 | 595 | 4 | 218 | 676 |
141.apsi | 4 | 115 | 656 | 4 | 100 | 757 |
145.fpppp | 4 | 292 | 1183 | 4 | 285 | 1214 |
146.wave5 | 4 | 112 | 964 | 4 | 107 | 1011 |
SPECfp_rate_base95 | 837 | |||||
SPECfp_rate95 | 896 |
Tester Information:
SPEC License #: | 19 |
---|---|
Tested By: | FUJITSU LIMITED |
Test Date: | Apr-99 |
Hardware Avail: | Aug-99 |
Software Avail: | Feb-99 |
Hardware Information:
Model Name: | FUJITSU GP7000F Model600 300 |
---|---|
CPU: | 296MHz SPARC64 GP |
FPU: | Integrated |
Number of CPU(s): | 4 |
Primary Cache: | 64KBI+64KBD on chip, 4way |
Secondary Cache: | 8.0MB(I+D) off chip |
Other Cache: | None |
Memory: | 2048MB |
Disk Subsystem: | 2 x 9.0GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | Solaris 2.6 |
---|---|
Compiler: | Fujitsu Fortran V4.0.1 |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | set consistent_coloring=1 |
Notes:
Baseline flags were: -Kfast,V8PFMADD,prefetch,gs Nonbaseline: PEAKOPT = -X7 -Kfast,V8PFMADD,GREG,gs,prefetch; EXTRA_FFLAGS = -dn 101: ${PEAKOPT} -Kpreex,eval 102: ${PEAKOPT} -Koffset=160 -Ksp=0 103: ${PEAKOPT} -Knofuse,eval -x- 104: ${PEAKOPT} -Kpreex,eval 107: ${PEAKOPT} -Kcommonpad,eval 110: ${PEAKOPT} -Kauto,preex,eval 125: ${PEAKOPT} -Kcommonpad,eval -Ksp=0 -x- 141: ${PEAKOPT} -Kauto,preex,eval 145: ${PEAKOPT} -Keval 146: ${PEAKOPT} -Kauto,nofuse -x10 Shell limits: ulimit -n 1024; ulimit -s 81920;
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Tue Jun 22 15:40:38 1999First published at SPEC.org on 22-Jun-1999