This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 52.3 |
---|---|
SPECfp_base95 | 50.1 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 43.6 | 84.9 | 44 | 84.6 |
102.swim | 8600 | 72.9 | 118 | 71 | 122 |
103.su2cor | 1400 | 43.6 | 32.1 | 44 | 32.2 |
104.hydro2d | 2400 | 94.1 | 25.5 | 94 | 25.6 |
107.mgrid | 2500 | 62.6 | 39.9 | 57 | 43.7 |
110.applu | 2200 | 63.3 | 34.8 | 61 | 35.8 |
125.turb3d | 4100 | 93.8 | 43.7 | 94 | 43.6 |
141.apsi | 2100 | 54.1 | 38.8 | 51 | 41.4 |
145.fpppp | 9600 | 122 | 78.6 | 100 | 95.9 |
146.wave5 | 3000 | 45.7 | 65.7 | 45 | 66.0 |
SPECfp_base95 | 50.1 | ||||
SPECfp95 | 52.3 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Fort Collins, CO |
Test Date: | Feb-99 |
Hardware Avail: | May-99 |
Software Avail: | May-99 |
Hardware Information:
Model Name: | HP 9000 Model J5000 |
---|---|
CPU: | 440 MHz PA-RISC 8500 |
FPU: | Integrated |
Number of CPU(s): | 2 |
Primary Cache: | 512KBI+1MBD on-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 2 GB |
Disk Subsystem: | 1-9GB LVD SCSI Disk |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B.10.20.07 B3907CA |
File System: | HP-UX LVM with HFS |
System State: | Multi-user |
Notes:
Base Flags: all: +Oall +Odataprefetch -Wl,-a,archive Peak Flags: Linker: 145: -Wl,-a,archive; all others: -Wl,-a,archive,+FPD 101: +O3 +Onolimit +Odataprefetch +Oaggressive 102: +Oall +Odataprefetch +Onovectorize +Onofltacc +Onolooptransform +Onoloopblock +Ocache_pad_common 103: +Oall +Odataprefetch 104: +Oall +Onovectorize +Onofltacc +Odataprefetch 107: +O3 +Onolimit +Onofltacc +Oinline_budget=1000000 +Oloop_unroll=8 +Odataprefetch 110: +Oall +Onovectorize +Onofltacc +Odataprefetch 125: +Oall +Odataprefetch +Oagressive 141: +O3 +Onolimit +Oaggressive +Onofltacc 145: +O4 +Olibcalls +Onofltacc +Onolimit +Ovectorize +Oinline_budget=1000000 +I/+P 146: +Oall +Odataprefetch Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Tue Jun 15 11:31:01 1999First published at SPEC.org on 08-Jun-1999