SPECfp_rate95

Sun Microsystems

Ultra 10 Model 440

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Base # Copies	Base Run Time	Base SPEC Ratio	Peak # Copies	Peak Run Time	Peak SPEC Ratio
101.tomcatv	2	270	247	2	242	275
102.swim	2	454	341	2	411	376
103.su2cor	2	223	113	2	199	127
104.hydro2d	2	474	91.2	2	453	95.3
107.mgrid	2	265	170	2	264	170
110.applu	2	379	104	2	301	132
125.turb3d	2	439	168	2	438	168
141.apsi	2	164	230	2	151	251
145.fpppp	2	845	204	2	546	317
146.wave5	2	237	228	2	206	262
SPECfp_rate_base95			175
			SPECfp_rate95			199

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Apr-99
Hardware Avail:	May-99
Software Avail:	Feb-99

Hardware Information:

Model Name:	Ultra 10 Model 440
CPU:	440 MHz UltraSPARC-IIi
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	2MB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	2 x 9GB (7200 RPM)
Other Hardware:	Fast Ethernet
	System clock frequency: 110 MHz

Software Information:

Operating System:	Solaris 7 (64bit)
Compiler:	Sun WorkShop FORTRAN 77 5.0
File System:	UFS
System State:	Single User
Kernel Extensions:	consistent_coloring=1

Notes:

P1= -xprofile=collect:`pwd`/../feedback; P2= -xprofile=use:`pwd`/../feedback; FOPTION= -fast -xarch=v8plusa -s
BCOPY = -Qoption iropt -O4+bcopy; INV = -Qoption iropt -O4+invccexp; BMR = -Qoption iropt -O4+bmerge
Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch
101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption iropt -O4+data_access
102.swim:    -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  ${FOPTION} -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2 ${BCOPY}
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
104.hydro2d: ${FOPTION} -xprefetch -Qoption iropt -O4+pde -fsimple=2
104.hydro2d: PASS1= ${P1}; PASS2= ${P2}
107.mgrid:   ${FOPTION} -xprefetch -fsimple=2 ${BCOPY}
107.mgrid:   PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
110.applu:   -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -fsimple=2
125.turb3d:  ${FOPTION} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
141.apsi:    ${FOPTION} -fsimple=2 -stackvar  -Qoption iropt -Si36  ${INV} ${BMR} -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
145.fpppp:   -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1
145.fpppp:   PASS1= ${P1}; PASS2= ${P2}
146.wave5:   ${FOPTION} -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Shell limits: # ulimit -n 1024  or % limit descriptors 1024
Config file: ultrabest.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 08-Jun-1999