SPECfp95

Sun Microsystems

Sun Enterprise 4500

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	34.1	109	27	139
102.swim	8600	11.6	742	8	1036
103.su2cor	1400	37.3	37.5	26	53.5
104.hydro2d	2400	34.2	70.3	31	77.1
107.mgrid	2500	22.5	111	23	108
110.applu	2200	133	16.5	121	18.2
125.turb3d	4100	277	14.8	196	21.0
141.apsi	2100	232	9.04	71	29.4
145.fpppp	9600	383	25.1	241	39.9
146.wave5	3000	112	26.8	112	26.9
SPECfp_base95			45.1
		SPECfp95			61.5

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Mar-99
Hardware Avail:	May-99
Software Avail:	Mar-99

Hardware Information:

Model Name:	Sun Enterprise 4500
CPU:	400MHz UltraSPARC II
FPU:	Integrated
Number of CPU(s):	12
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	8MB(I+D) off chip per CPU
Other Cache:	None
Memory:	12GB
Disk Subsystem:	6 x 4GB
Other Hardware:	FastEthernet

Software Information:

Operating System:	Solaris7_64bit
Compiler:	Sun F77 5.0
File System:	UFS
System State:	Multi-User
Kernel Extensions:

Notes:

BCOPY =  -Qoption iropt -O4+bcopy
INV =    -Qoption iropt -O4+invccexp
FULTRA = -xarch=v8plusa -xchip=ultra
Baseline: -fast -xarch=v8plusa -xprefetch  -xparallel
101.tomcatv: -fast ${FULTRA} -xpad=local:23 -xprefetch -xreduction -xparallel
102.swim: -fast ${FULTRA} -xpad=common:15 -xprefetch -fsimple=2 -xparallel
103.su2cor: -fast ${FULTRA} -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2 -xprefetch ${BCOPY} -xreduction -xparallel -lmvec
104.hydro2d: -fast ${FULTRA} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use  -xparallel
107.mgrid: -fast ${FULTRA} -xprefetch -fsimple=2 ${BCOPY} -xparallel
110.applu: -fast ${FULTRA} -fsimple=2 -xparallel
110 cont: -Qoption iropt -O4+ddint+scalarrep+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr
125.turb3d: -fast ${FULTRA} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
141.apsi: -fast ${FULTRA} -fsimple=2 -stackvar -Qoption iropt -Si36 ${INV} -Qoption iropt -O4+algassoc 
145.fpppp: -fast ${FULTRA} -xO5 -xsafe=mem -fsimple=2 
145 cont: -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 -xprofile=use 
146.wave5: -fast ${FULTRA}  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 25-May-1999