This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 21.9 |
---|---|
SPECfp_base95 | 19.6 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 134 | 27.7 | 117 | 31.8 |
102.swim | 8600 | 233 | 36.9 | 219 | 39.2 |
103.su2cor | 1400 | 107 | 13.1 | 95 | 14.7 |
104.hydro2d | 2400 | 231 | 10.4 | 219 | 11.0 |
107.mgrid | 2500 | 131 | 19.0 | 130 | 19.3 |
110.applu | 2200 | 196 | 11.2 | 158 | 13.9 |
125.turb3d | 4100 | 228 | 18.0 | 223 | 18.4 |
141.apsi | 2100 | 79.7 | 26.4 | 78 | 26.9 |
145.fpppp | 9600 | 420 | 22.9 | 281 | 34.1 |
146.wave5 | 3000 | 118 | 25.5 | 107 | 28.0 |
SPECfp_base95 | 19.6 | ||||
SPECfp95 | 21.9 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Feb-99 |
Hardware Avail: | Mar-99 |
Software Avail: | Feb-99 |
Hardware Information:
Model Name: | Sun Enterprise 250 |
---|---|
CPU: | 400 MHz UltraSPARC-II |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 2MB (I+D) off chip |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 2 x 4.2GB |
Other Hardware: | Fast Ethernet |
Software Information:
Operating System: | Solaris 7 (kernel/unix) |
---|---|
Compiler: | Sun f77 5.0 Developer Release (12/22/98) |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | consistent_coloring=1 |
Notes:
P1= -xprofile=collect:`pwd`/../feedback; P2= `pwd`/../feedback BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch 101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption 102.swim: -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 103.su2cor: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}; 104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde 104.hydro2d: PASS1= ${P1}; PASS2= ${P2}; 107.mgrid: -fast -xarch=v8plusa -xprefetch -fsimple=2 ${BCOPY} 107.mgrid: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}; 110.applu: -fast -xarch=v8plusa -Qoption iropt 125.turb3d: -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 -Qoption 125.turb3d: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}; 141.apsi: -fast -xarch=v8plusa -xchip=ultra3 -fsimple=2 -stackvar 141.apsi: ${INV} -Qoption iropt -O4+algassoc; PASS1= -xO4 ${P1}; PASS2= 145.fpppp: -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend 145.fpppp: PASS1= ${P1}; PASS2= ${P2}; 146.wave5: -fast -xarch=v8plusa -stackvar -fsimple=2 -Qoption iropt Shell limits: # ulimit -n 1024 or % limit descriptors 1024 Config file: E250_DT.pub_sp.int.fp_3.cfg 99/01/27
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Mar 16 11:14:12 1999First published at SPEC.org on 16-Mar-1999