This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 413 |
---|---|
SPECfp_rate_base95 | 389 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 88.7 | 751 | 2 | 84 | 793 |
102.swim | 2 | 151 | 1025 | 2 | 138 | 1124 |
103.su2cor | 2 | 109 | 231 | 2 | 111 | 228 |
104.hydro2d | 2 | 124 | 349 | 2 | 122 | 354 |
107.mgrid | 2 | 138 | 326 | 2 | 118 | 382 |
110.applu | 2 | 200 | 198 | 2 | 197 | 201 |
125.turb3d | 2 | 270 | 273 | 2 | 237 | 312 |
141.apsi | 2 | 127 | 299 | 2 | 108 | 351 |
145.fpppp | 2 | 320 | 540 | 2 | 335 | 515 |
146.wave5 | 2 | 122 | 442 | 2 | 117 | 461 |
SPECfp_rate_base95 | 389 | |||||
SPECfp_rate95 | 413 |
Tester Information:
SPEC License #: | 19 |
---|---|
Tested By: | FUJITSU LIMITED |
Test Date: | Dec-98 |
Hardware Avail: | Dec-98 |
Software Avail: | Feb-99 |
Hardware Information:
Model Name: | FUJITSU GP7000F Model600 275 |
---|---|
CPU: | 272MHz SPARC64 GP |
FPU: | Integrated |
Number of CPU(s): | 2 |
Primary Cache: | 64KBI+64KBD on chip, 4way |
Secondary Cache: | 8.0MB(I+D) off chip |
Other Cache: | None |
Memory: | 4096MB |
Disk Subsystem: | 2 x 9.0GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | Solaris 2.6 HW:5/98 |
---|---|
Compiler: | Fujitsu Fortran V4.0.1 |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | set consistent_coloring=1 |
Notes:
Baseline flags were: -Kfast,V8PFMADD,prefetch,gs Nonbaseline: PEAKOPT=-X7 -Kfast,V8PFMADD,GREG,gs,prefetch; EXTRA_FFLAGS=-dn 101: ${PEAKOPT} -Kpreex,eval 102: ${PEAKOPT} -Koffset=160 -Ksp=0 103: ${PEAKOPT} -Knofuse,eval -x- 104: ${PEAKOPT} -Kpreex,eval 107: ${PEAKOPT} -Kcommonpad,eval 110: ${PEAKOPT} -Kauto,preex,eval 125: ${PEAKOPT} -Kcommonpad,eval -Ksp=0 -x- 141: -X7 ${PEAKOPT} -Kauto,preex,eval 145: ${PEAKOPT} -Keval 146: ${PEAKOPT} -Kauto,nofuse -x10 Shell limits: ulimit -n 1024; ulimit -s 81920;
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Mon Feb 22 10:36:16 1999First published at SPEC.org on 18-Feb-1999