This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 20.9 |
---|---|
SPECfp_base95 | 19.4 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 139 | 26.7 | 131 | 28.3 |
102.swim | 8600 | 202 | 42.7 | 191 | 45.1 |
103.su2cor | 1400 | 119 | 11.7 | 119 | 11.8 |
104.hydro2d | 2400 | 168 | 14.3 | 164 | 14.6 |
107.mgrid | 2500 | 149 | 16.8 | 119 | 21.0 |
110.applu | 2200 | 204 | 10.8 | 201 | 11.0 |
125.turb3d | 4100 | 278 | 14.8 | 248 | 16.5 |
141.apsi | 2100 | 122 | 17.2 | 101 | 20.7 |
145.fpppp | 9600 | 293 | 32.7 | 288 | 33.4 |
146.wave5 | 3000 | 117 | 25.7 | 112 | 26.9 |
SPECfp_base95 | 19.4 | ||||
SPECfp95 | 20.9 |
Tester Information:
SPEC License #: | 19 |
---|---|
Tested By: | FUJITSU LIMITED |
Test Date: | Jan-99 |
Hardware Avail: | Dec-98 |
Software Avail: | Feb-99 |
Hardware Information:
Model Name: | FUJITSU GP7000F Model200 250 |
---|---|
CPU: | 248MHz SPARC64 GP |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 64KBI+64KBD on chip, 4way |
Secondary Cache: | 4.0MB(I+D) off chip |
Other Cache: | None |
Memory: | 1024MB |
Disk Subsystem: | 2 x 9.0GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | Solaris 2.6 HW:5/98 |
---|---|
Compiler: | Fujitsu Fortran V4.0.1 |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | set users_run_rmo=1, set consistent_coloring=1 |
Notes:
Baseline flags were: -Kfast,V8PFMADD,prefetch,gs Nonbaseline: PEAKOPT=-X7 -Kfast,V8PFMADD,GREG,gs,prefetch; EXTRA_FFLAGS=-dn 101: ${PEAKOPT} -Kpreex,eval 102: ${PEAKOPT} -Koffset=160 -Ksp=0 103: ${PEAKOPT} -Knofuse,eval -x- 104: ${PEAKOPT} -Kpreex,eval 107: ${PEAKOPT} -Kcommonpad,eval 110: ${PEAKOPT} -Kauto,preex,eval 125: ${PEAKOPT} -Kcommonpad,eval -Ksp=0 -x- 141: -X7 ${PEAKOPT} -Kauto,preex,eval 145: ${PEAKOPT} -Keval 146: ${PEAKOPT} -Kauto,nofuse -x10 Shell limits: ulimit -n 1024; ulimit -s 81920;
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Mon Feb 22 10:36:09 1999First published at SPEC.org on 18-Feb-1999