This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 54.4 |
---|---|
SPECfp_base95 | 46.7 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 39.1 | 94.6 | 30 | 125 |
102.swim | 8600 | 28.2 | 305 | 27 | 321 |
103.su2cor | 1400 | 39.5 | 35.5 | 28 | 50.0 |
104.hydro2d | 2400 | 35.0 | 68.5 | 32 | 74.7 |
107.mgrid | 2500 | 17.9 | 140 | 18 | 138 |
110.applu | 2200 | 138 | 15.9 | 126 | 17.5 |
125.turb3d | 4100 | 227 | 18.1 | 212 | 19.3 |
141.apsi | 2100 | 74.6 | 28.1 | 74 | 28.2 |
145.fpppp | 9600 | 398 | 24.1 | 251 | 38.3 |
146.wave5 | 3000 | 116 | 25.9 | 100 | 29.9 |
SPECfp_base95 | 46.7 | ||||
SPECfp95 | 54.4 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Sep-98 |
Hardware Avail: | Dec-98 |
Software Avail: | Oct-98 |
Hardware Information:
Model Name: | Sun Enterprise 4500 |
---|---|
CPU: | 400MHz UltraSPARC II |
FPU: | Integrated |
Number of CPU(s): | 12 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 4096KB(I+D) off chip |
Other Cache: | None |
Memory: | 8192MB |
Disk Subsystem: | 2 x 9GB |
Other Hardware: | FastEthernet |
Software Information:
Operating System: | Solaris 2.7 |
---|---|
Compiler: | Sun F77 5.0 |
File System: | UFS |
System State: | Multi-User |
Kernel Extensions: |
Notes:
BCOPY = -Qoption iropt -O4+bcopy INV = -Qoption iropt -O4+invccexp FULTRA = -xarch=v8plusa -xchip=ultra Baseline: -fast -xarch=v8plusa -xprefetch -xparallel 101.tomcatv: -fast ${FULTRA} -xpad=local:23 -xprefetch -xparallel -xreduction 102.swim: -fast ${FULTRA} -xpad=common:15 -xprefetch -fsimple=2 -xparallel 103.su2cor: -fast ${FULTRA} -xvector -Qoption cg -Qms_pipe+nfll=5 103 cont: -fsimple=2 -xprefetch ${BCOPY} -xparallel -xreduction -lmvec 104.hydro2d: -fast ${FULTRA} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use -xparallel 107.mgrid: -fast ${FULTRA} -xprefetch ${BCOPY} -xparallel 110.applu: -fast ${FULTRA} -fsimple=2 -xparallel 110.cont: -Qoption iropt -O4+ddint+scalarrep+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr 125.turb3d: -fast ${FULTRA} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes 141.apsi: -fast ${FULTRA} -fsimple=2 -stackvar -Qoption iropt 141 cont: -Si36 ${INV} -Qoption iropt -O4+algassoc 145.fpppp: -fast ${FULTRA} -xO5 -xsafe=mem -fsimple=2 145 cont: -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 -xprofile=use 146.wave5: -fast ${FULTRA} -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY} Config Version @(#)udm.cfg 1.0 98/09/03
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Mon Feb 22 10:35:56 1999First published at SPEC.org on 18-Feb-1999