This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 2465 |
---|---|
SPECfp_rate_base95 | 2199 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 14 | 213 | 2193 | 14 | 198 | 2350 |
102.swim | 14 | 339 | 3199 | 14 | 318 | 3404 |
103.su2cor | 14 | 103 | 1719 | 14 | 102 | 1735 |
104.hydro2d | 14 | 202 | 1496 | 14 | 199 | 1522 |
107.mgrid | 14 | 151 | 2081 | 14 | 151 | 2092 |
110.applu | 14 | 257 | 1077 | 14 | 206 | 1344 |
125.turb3d | 14 | 239 | 2158 | 14 | 223 | 2321 |
141.apsi | 14 | 77.2 | 3428 | 14 | 77 | 3444 |
145.fpppp | 14 | 417 | 2899 | 14 | 253 | 4778 |
146.wave5 | 14 | 124 | 3043 | 14 | 103 | 3653 |
SPECfp_rate_base95 | 2199 | |||||
SPECfp_rate95 | 2465 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Sep-98 |
Hardware Avail: | Dec-98 |
Software Avail: | Oct-98 |
Hardware Information:
Model Name: | Sun Enterprise 4500 |
---|---|
CPU: | 400MHz UltraSPARC II |
FPU: | Integrated |
Number of CPU(s): | 14 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 4096KB(I+D) off chip |
Other Cache: | None |
Memory: | 8192MB |
Disk Subsystem: | 2 x 9GB |
Other Hardware: | FastEthernet |
Software Information:
Operating System: | Solaris 2.7 |
---|---|
Compiler: | Sun F77 5.0 |
File System: | UFS |
System State: | Multi-User |
Kernel Extensions: |
Notes:
BCOPY = -Qoption iropt -O4+bcopy INV = -Qoption iropt -O4+invccexp FULTRA = -xarch=v8plusa -xchip=ultra Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch 101.tomcatv: -fast ${FULTRA} -xpad=local:23 -xprefetch 102.swim: -fast ${FULTRA} -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: -fast ${FULTRA} -xvector -Qoption cg -Qms_pipe+nfll=5 103 cont: -fsimple=2 -xprefetch ${BCOPY} -lmvec 104.hydro2d: -fast ${FULTRA} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use 107.mgrid: -fast ${FULTRA} -xprefetch -fsimple=2 ${BCOPY} 110.applu: -fast ${FULTRA} -fsimple=2 110.cont: -Qoption iropt -O4+ddint+scalarrep+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr 125.turb3d: -fast ${FULTRA} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes 141.apsi: -fast ${FULTRA} -fsimple=2 -stackvar -Qoption iropt 141 cont: -Si36 ${INV} -Qoption iropt -O4+algassoc 145.fpppp: -fast ${FULTRA} -xO5 -xsafe=mem -fsimple=2 145 cont: -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 -xprofile=use 146.wave5: -fast ${FULTRA} -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY} Config Version @(#)uds.cfg 1.0 98/09/03
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Mon Feb 22 10:35:49 1999First published at SPEC.org on 18-Feb-1999