This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 61.2 |
|---|---|
| SPECfp_rate_base95 | 59.2 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 330 | 101 | 1 | 314 | 106 |
| 102.swim | 1 | 496 | 156 | 1 | 446 | 173 |
| 103.su2cor | 1 | 509 | 24.8 | 1 | 509 | 24.7 |
| 104.hydro2d | 1 | 661 | 32.7 | 1 | 647 | 33.4 |
| 107.mgrid | 1 | 564 | 39.9 | 1 | 501 | 44.9 |
| 110.applu | 1 | 511 | 38.7 | 1 | 508 | 39.0 |
| 125.turb3d | 1 | 688 | 53.6 | 1 | 661 | 55.9 |
| 141.apsi | 1 | 333 | 56.8 | 1 | 333 | 56.8 |
| 145.fpppp | 1 | 936 | 92.3 | 1 | 936 | 92.4 |
| 146.wave5 | 1 | 282 | 95.9 | 1 | 284 | 94.9 |
| SPECfp_rate_base95 | 59.2 | |||||
| SPECfp_rate95 | 61.2 | |||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Jul-96 |
| Hardware Avail: | Mar-95 |
| Software Avail: | Sep-96 |
Hardware Information:
| Model Name: | HP 9000 Model K400 |
|---|---|
| CPU: | 100 MHz PA-RISC 7200 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 256KBI+256KBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 128MB |
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | None |
Software Information:
| Operating System: | HP-UX B.10.20 |
|---|---|
| Compiler: | HP FORTRAN B3906AA B.10.20.01 |
| File System: | HP-UX |
| System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -a,archive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 +I/+P +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200 141: +Oall +Onofastaccess +DC7200 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -a,archive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Wed Sep 25 17:27:27 PDT 1996First published at SPEC.org on 17-Sep-1996