This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 18.8 | 
|---|---|
| SPECfp_base95 | 17.0 | 
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 129 | 28.8 | 129 | 28.6 | 
| 102.swim | 8600 | 285 | 30.2 | 173 | 49.6 | 
| 103.su2cor | 1400 | 119 | 11.8 | 117 | 12.0 | 
| 104.hydro2d | 2400 | 236 | 10.2 | 237 | 10.1 | 
| 107.mgrid | 2500 | 176 | 14.2 | 157 | 15.9 | 
| 110.applu | 2200 | 157 | 14.0 | 154 | 14.3 | 
| 125.turb3d | 4100 | 336 | 12.2 | 294 | 13.9 | 
| 141.apsi | 2100 | 191 | 11.0 | 183 | 11.5 | 
| 145.fpppp | 9600 | 339 | 28.3 | 288 | 33.4 | 
| 146.wave5 | 3000 | 115 | 26.1 | 114 | 26.3 | 
| SPECfp_base95 | 17.0 | ||||
| SPECfp95 | 18.8 | ||||
Tester Information:
| SPEC License #: | 3 | 
|---|---|
| Tested By: | HP Cupertino, CA | 
| Test Date: | Aug-96 | 
| Hardware Avail: | Sep-96 | 
| Software Avail: | Sep-96 | 
Hardware Information:
| Model Name: | HP 9000 Model K450 | 
|---|---|
| CPU: | 160 MHz PA-RISC 8000 | 
| FPU: | Integrated | 
| Number of CPU(s): | 1 | 
| Primary Cache: | 1MBI+1MBD off-chip | 
| Secondary Cache: | None | 
| Other Cache: | None | 
| Memory: | 2GB | 
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB | 
| Other Hardware: | None | 
Software Information:
| Operating System: | HP-UX B.10.20 | 
|---|---|
| Compiler: | HP FORTRAN B3906AA B.10.20.01 | 
| File System: | HP-UX | 
| System State: | Multi-user | 
Notes:
Base Flags: All: +Oall +Odataprefetch Linker Flag: All: -Wl,-aarchive Peak Flags: 101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl,-aarchive The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Wed Sep 25 17:27:03 PDT 1996First published at SPEC.org on 17-Sep-1996