This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 20.2 |
---|---|
SPECfp_base95 | 18.3 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 122 | 30.4 | 122 | 30.3 |
102.swim | 8600 | 284 | 30.2 | 162 | 53.2 |
103.su2cor | 1400 | 109 | 12.8 | 110 | 12.7 |
104.hydro2d | 2400 | 227 | 10.6 | 220 | 10.9 |
107.mgrid | 2500 | 162 | 15.4 | 145 | 17.3 |
110.applu | 2200 | 145 | 15.2 | 146 | 15.1 |
125.turb3d | 4100 | 317 | 12.9 | 269 | 15.2 |
141.apsi | 2100 | 171 | 12.3 | 171 | 12.3 |
145.fpppp | 9600 | 299 | 32.1 | 256 | 37.4 |
146.wave5 | 3000 | 106 | 28.3 | 108 | 27.8 |
SPECfp_base95 | 18.3 | ||||
SPECfp95 | 20.2 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Mar-96 |
Hardware Avail: | Jun-96 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Model K460EG |
---|---|
CPU: | 180 MHz PA-RISC 8000 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 1MBI+1MBD off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | HP-UX B.10.20 IC8 |
---|---|
Compiler: | f77 B3906AA B.10.00.01.B5 |
File System: | HP-UX |
System State: | Single-user |
Notes:
Portability Flags: none Library Flags (base & peak) all benchmarks: -Wl, -aarchive Base: +Oall +Odataprefetch Peak Flags: 101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I/+P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Jun 25 9:17:02 PDT 1996First published at SPEC.org on 25-Jun-1996