# Invocation command line:
# /home/cpu2017/bin/harness/runcpu --configfile amd_rate_aocc500_znver5_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode rate --tune base:peak --size test:train:refrate intrate
# output_root was not used for this run
############################################################################
################################################################################
# AMD AOCC 500 SPEC CPU 2017 V1.1.9 Rate Configuration File for 64-bit Linux
#
#      File name                : amd_rate_aocc500_znver5_A1.cfg
#      Creation Date            : September 12, 2024
#      CPU 2017 Version         : 1.1.9
#      Supported benchmarks     : All Rate benchmarks (intrate, fprate)
#      Compiler name/version    : AOCC 5.0.0
#      Operating system version : RHEL 8.6
#      Supported OS's           : SLE 15 SP6, Ubuntu 22.04-24.04, RHEL 9.x, RHEL 8.6
#      Hardware                 : AMD Turin (AMD64)
#      FP Base Pointer Size     : 64-bit
#      FP Peak Pointer Size     : 64-bit
#      INT Base Pointer Size    : 64-bit
#      INT Peak Pointer Size    : 32/64-bit
#      Auto Parallelization     : No
#
# Note: DO NOT EDIT THIS FILE, the only edits required to properly run these
# binaries are made in the ini Python file.  Please consult Readme.amd_rate_aocc500_znver5_A1.txt
# for a few uncommon exceptions which require edits to this file.
#
# Description:
#
# This binary package automates away many of the complexities necessary to set
# up and run SPEC CPU 2017 under optimized conditions on AMD Turin-based
# server platforms within Linux (AMD64).
#
# The binary package was built specifically for AMD Turin microprocessors and
# is not intended to run on other products.
#
# Please install the binary package by following the instructions in
# "Readme.amd_rate_aocc500_znver5_A1.txt" under the "How To Use the Binaries" section.
#
# The binary package is designed to work without alteration on two socket AMD
# Turin-based servers with 96 cores per socket, SMT enabled and 1.5 TiB of DDR5
# memory distributed evenly among all 24 channels using 64 GiB DIMMs.
#
# To run the binary package on other Turin configurations, please review
# "Readme.amd_rate_aocc500_znver5_A1.txt". In general, Turin CPUs
# should be autodetected with no action required by the user.
#
# In most cases, it should be unnecessary to edit "amd_rate_aocc500_znver5_A1.cfg" or any
# other file besides "ini_amd_rate_aocc500_znver5_A1.py" where reporting fields
# and run conditions are set.
#
# The run script automatically sets the optimal number of rate copies and binds
# them appropriately.
#
# The run script and accompanying binary package are designed to work on Ubuntu
# 22.04-24.04, SLE 15 SP6, RHEL 9.x, RHEL 8.6.
#
# Important! If you write your own run script, please set the stack size to
# "unlimited" when executing this binary package.  Failure to do so may cause
# some benchmarks to overflow the stack.  For example, to set stack size within
# the bash shell, include the following line somewhere at the top of your run
# script before the runcpu invocation:
#
#      ulimit -s unlimited
#
# Modification of this config file should only be necessary if you intend to
# rebuild the binaries.  General instructions for rebuilding the binaries are
# found in-line below.
#
################################################################################
# Modifiable macros:
################################################################################
# "allow_build"" switch:
# Change the following line to true if you intend to REBUILD the binaries (AMD
# does not support this). Valid values are "true" or "false" (no quotes).
%define allow_build false
# Only change these macros if you are rebuilding the binary package:
%define compiler_name aocc500
%define binary_package_name amd_rate_%{compiler_name}_znver5_A
%define binary_package_ext %{binary_package_name}
%define binary_package_revision 1
%define build_path /home/work/cpu2017/v119/aocc5/1316
%define flags_file_name %{compiler_name}-flags-A1.xml
# Do NOT change build_lib_dir after the build or it will trigger a
# rebuild of the xalanc. It should also remain literal:
%define build_lib_dir %{binary_package_name}_lib
# To enable the platform file, be sure to uncomment the flagsurl02 header line
# below in the Header settings.
%define platform_file_name INVALID_platform_%{binary_package_name}.xml
################################################################################
# You should never have to change binary_package_full_name:
%define binary_package_full_name %{binary_package_name}%{binary_package_revision}

################################################################################
# Include file names
################################################################################
# The include file contains fields that are commonly changed. This file is auto-
# generated based upon INI file settings and should not need user modification
# for runs. The flags include file contains all of the compiler flags.

%define inc_file_name %{binary_package_full_name}.inc
%define flags_inc_file_name %{binary_package_full_name}_flags.inc
%define port_flags_inc_file_name %{binary_package_full_name}_flags_portability.inc
%define workaround_flags_inc_file_name %{binary_package_full_name}_flags_workaround.inc

# Binary label extension:
# Only modify the binary label extension if you plan to rebuild the binaries.
# If you plan to recompile these CPU 2017 binaries, please choose a new extension
# name below to avoid confusion with the current binary set on your system
# under test, and to avoid confusion for SPEC submission reviewers.  You will
# also need to set "allow_build" to true above. Finally, you must modify the
# Paths section below to point to your library locations if the paths are not
# already set up in your build environment.
# Note that AMD calls an external script to set up the compiler and library
# paths before initiating the build.

%define ext %{binary_package_ext}

################################################################################
# Paths and Environment Variables
# ** MODIFY AS NEEDED (modification should not be necessary for runs) **
################################################################################
# Allow environment variables to be set before runs:
preenv                   = 1

# Necessary to avoid out-of-memory exceptions on certain SUTs:
preENV_MALLOC_CONF       = retain:true

# Define the name of the directory that holds AMD library files:
%define lib_dir %{binary_package_name}_lib


# Set the shared object library path for runs and builds:
preENV_LD_LIBRARY_PATH   = $[top]/%{lib_dir}/lib:$[top]/%{lib_dir}/lib32:%{ENV_LD_LIBRARY_PATH}
# Define 32-bit library build paths:
# Do NOT use $[top] with the 32-bit libraries because doing so will cause an
# options checksum error triggering a xalanc recompile attempt on SUTs having
# different file paths.
# Do NOT change build_lib_dir after the build or it will also trigger a
# rebuild of the xalanc:
AMDALLOC_LIB32_PATH      = %{build_path}/%{build_lib_dir}/lib32
%if '%{allow_build}' eq 'false'
  # The include file is only needed for runs, but not for builds.
#  include: %{inc_file_name}
#  ----- Begin inclusion of 'amd_rate_aocc500_znver5_A1.inc'
############################################################################
################################################################################
################################################################################
# File name: amd_rate_aocc500_znver5_A1.inc
# File generation code date: September 23, 2022
# File generation date/time: January 06, 2025 / 08:34:33
#
# This file is automatically generated during a SPEC CPU2017 run.
#
# To modify inc file generation, please consult the readme file or the run
# script.
################################################################################
################################################################################

################################################################################
################################################################################
# The following macros are generated for use in the cfg file.
################################################################################
################################################################################

%define logical_core_count 64
%define physical_core_count 32

################################################################################
# The following inc blocks set the rate copy counts and affinity settings.
#
# intrate benchmarks: 500.perlbench_r,502.gcc_r,505.mcf_r,520.omnetpp_r,
#   523.xalancbmk_r,525.x264_r,531.deepsjeng_r,541.leela_r,548.exchange2_r,
#   557.xz_r
# fpspeed benchmarks: 503.bwaves_r,507.cactuBSSN_r,519.lbm_r,521.wrf_r,
#   527.cam4_r,538.imagick_r,544.nab_r,549.fotonik3d_r,554.roms_r
#
# Selected copy counts from '9355' section of CPU info
################################################################################
# default copy counts:
default:
copies                  = 64
# Bind commands for assigning affinity:
bind0            = numactl --localalloc --physcpubind=0
bind1            = numactl --localalloc --physcpubind=1
bind2            = numactl --localalloc --physcpubind=2
bind3            = numactl --localalloc --physcpubind=3
bind4            = numactl --localalloc --physcpubind=4
bind5            = numactl --localalloc --physcpubind=5
bind6            = numactl --localalloc --physcpubind=6
bind7            = numactl --localalloc --physcpubind=7
bind8            = numactl --localalloc --physcpubind=8
bind9            = numactl --localalloc --physcpubind=9
bind10            = numactl --localalloc --physcpubind=10
bind11            = numactl --localalloc --physcpubind=11
bind12            = numactl --localalloc --physcpubind=12
bind13            = numactl --localalloc --physcpubind=13
bind14            = numactl --localalloc --physcpubind=14
bind15            = numactl --localalloc --physcpubind=15
bind16            = numactl --localalloc --physcpubind=16
bind17            = numactl --localalloc --physcpubind=17
bind18            = numactl --localalloc --physcpubind=18
bind19            = numactl --localalloc --physcpubind=19
bind20            = numactl --localalloc --physcpubind=20
bind21            = numactl --localalloc --physcpubind=21
bind22            = numactl --localalloc --physcpubind=22
bind23            = numactl --localalloc --physcpubind=23
bind24            = numactl --localalloc --physcpubind=24
bind25            = numactl --localalloc --physcpubind=25
bind26            = numactl --localalloc --physcpubind=26
bind27            = numactl --localalloc --physcpubind=27
bind28            = numactl --localalloc --physcpubind=28
bind29            = numactl --localalloc --physcpubind=29
bind30            = numactl --localalloc --physcpubind=30
bind31            = numactl --localalloc --physcpubind=31
bind32            = numactl --localalloc --physcpubind=32
bind33            = numactl --localalloc --physcpubind=33
bind34            = numactl --localalloc --physcpubind=34
bind35            = numactl --localalloc --physcpubind=35
bind36            = numactl --localalloc --physcpubind=36
bind37            = numactl --localalloc --physcpubind=37
bind38            = numactl --localalloc --physcpubind=38
bind39            = numactl --localalloc --physcpubind=39
bind40            = numactl --localalloc --physcpubind=40
bind41            = numactl --localalloc --physcpubind=41
bind42            = numactl --localalloc --physcpubind=42
bind43            = numactl --localalloc --physcpubind=43
bind44            = numactl --localalloc --physcpubind=44
bind45            = numactl --localalloc --physcpubind=45
bind46            = numactl --localalloc --physcpubind=46
bind47            = numactl --localalloc --physcpubind=47
bind48            = numactl --localalloc --physcpubind=48
bind49            = numactl --localalloc --physcpubind=49
bind50            = numactl --localalloc --physcpubind=50
bind51            = numactl --localalloc --physcpubind=51
bind52            = numactl --localalloc --physcpubind=52
bind53            = numactl --localalloc --physcpubind=53
bind54            = numactl --localalloc --physcpubind=54
bind55            = numactl --localalloc --physcpubind=55
bind56            = numactl --localalloc --physcpubind=56
bind57            = numactl --localalloc --physcpubind=57
bind58            = numactl --localalloc --physcpubind=58
bind59            = numactl --localalloc --physcpubind=59
bind60            = numactl --localalloc --physcpubind=60
bind61            = numactl --localalloc --physcpubind=61
bind62            = numactl --localalloc --physcpubind=62
bind63            = numactl --localalloc --physcpubind=63
submit = echo "$command" > run.sh ; $BIND bash run.sh
################################################################################
################################################################################
# fprate copy counts:
fprate:
copies                  = 64
# Bind commands for assigning affinity:
bind0            = numactl --localalloc --physcpubind=0
bind1            = numactl --localalloc --physcpubind=1
bind2            = numactl --localalloc --physcpubind=2
bind3            = numactl --localalloc --physcpubind=3
bind4            = numactl --localalloc --physcpubind=4
bind5            = numactl --localalloc --physcpubind=5
bind6            = numactl --localalloc --physcpubind=6
bind7            = numactl --localalloc --physcpubind=7
bind8            = numactl --localalloc --physcpubind=8
bind9            = numactl --localalloc --physcpubind=9
bind10            = numactl --localalloc --physcpubind=10
bind11            = numactl --localalloc --physcpubind=11
bind12            = numactl --localalloc --physcpubind=12
bind13            = numactl --localalloc --physcpubind=13
bind14            = numactl --localalloc --physcpubind=14
bind15            = numactl --localalloc --physcpubind=15
bind16            = numactl --localalloc --physcpubind=16
bind17            = numactl --localalloc --physcpubind=17
bind18            = numactl --localalloc --physcpubind=18
bind19            = numactl --localalloc --physcpubind=19
bind20            = numactl --localalloc --physcpubind=20
bind21            = numactl --localalloc --physcpubind=21
bind22            = numactl --localalloc --physcpubind=22
bind23            = numactl --localalloc --physcpubind=23
bind24            = numactl --localalloc --physcpubind=24
bind25            = numactl --localalloc --physcpubind=25
bind26            = numactl --localalloc --physcpubind=26
bind27            = numactl --localalloc --physcpubind=27
bind28            = numactl --localalloc --physcpubind=28
bind29            = numactl --localalloc --physcpubind=29
bind30            = numactl --localalloc --physcpubind=30
bind31            = numactl --localalloc --physcpubind=31
bind32            = numactl --localalloc --physcpubind=32
bind33            = numactl --localalloc --physcpubind=33
bind34            = numactl --localalloc --physcpubind=34
bind35            = numactl --localalloc --physcpubind=35
bind36            = numactl --localalloc --physcpubind=36
bind37            = numactl --localalloc --physcpubind=37
bind38            = numactl --localalloc --physcpubind=38
bind39            = numactl --localalloc --physcpubind=39
bind40            = numactl --localalloc --physcpubind=40
bind41            = numactl --localalloc --physcpubind=41
bind42            = numactl --localalloc --physcpubind=42
bind43            = numactl --localalloc --physcpubind=43
bind44            = numactl --localalloc --physcpubind=44
bind45            = numactl --localalloc --physcpubind=45
bind46            = numactl --localalloc --physcpubind=46
bind47            = numactl --localalloc --physcpubind=47
bind48            = numactl --localalloc --physcpubind=48
bind49            = numactl --localalloc --physcpubind=49
bind50            = numactl --localalloc --physcpubind=50
bind51            = numactl --localalloc --physcpubind=51
bind52            = numactl --localalloc --physcpubind=52
bind53            = numactl --localalloc --physcpubind=53
bind54            = numactl --localalloc --physcpubind=54
bind55            = numactl --localalloc --physcpubind=55
bind56            = numactl --localalloc --physcpubind=56
bind57            = numactl --localalloc --physcpubind=57
bind58            = numactl --localalloc --physcpubind=58
bind59            = numactl --localalloc --physcpubind=59
bind60            = numactl --localalloc --physcpubind=60
bind61            = numactl --localalloc --physcpubind=61
bind62            = numactl --localalloc --physcpubind=62
bind63            = numactl --localalloc --physcpubind=63
submit = echo "$command" > run.sh ; $BIND bash run.sh
################################################################################
################################################################################
# peak copy counts: 64
507.cactuBSSN_r,508.namd_r,511.povray_r,526.blender_r,527.cam4_r,538.imagick_r,544.nab_r=peak:
copies                  = 64
# Bind commands for assigning affinity:
bind0            = numactl --localalloc --physcpubind=0
bind1            = numactl --localalloc --physcpubind=1
bind2            = numactl --localalloc --physcpubind=2
bind3            = numactl --localalloc --physcpubind=3
bind4            = numactl --localalloc --physcpubind=4
bind5            = numactl --localalloc --physcpubind=5
bind6            = numactl --localalloc --physcpubind=6
bind7            = numactl --localalloc --physcpubind=7
bind8            = numactl --localalloc --physcpubind=8
bind9            = numactl --localalloc --physcpubind=9
bind10            = numactl --localalloc --physcpubind=10
bind11            = numactl --localalloc --physcpubind=11
bind12            = numactl --localalloc --physcpubind=12
bind13            = numactl --localalloc --physcpubind=13
bind14            = numactl --localalloc --physcpubind=14
bind15            = numactl --localalloc --physcpubind=15
bind16            = numactl --localalloc --physcpubind=16
bind17            = numactl --localalloc --physcpubind=17
bind18            = numactl --localalloc --physcpubind=18
bind19            = numactl --localalloc --physcpubind=19
bind20            = numactl --localalloc --physcpubind=20
bind21            = numactl --localalloc --physcpubind=21
bind22            = numactl --localalloc --physcpubind=22
bind23            = numactl --localalloc --physcpubind=23
bind24            = numactl --localalloc --physcpubind=24
bind25            = numactl --localalloc --physcpubind=25
bind26            = numactl --localalloc --physcpubind=26
bind27            = numactl --localalloc --physcpubind=27
bind28            = numactl --localalloc --physcpubind=28
bind29            = numactl --localalloc --physcpubind=29
bind30            = numactl --localalloc --physcpubind=30
bind31            = numactl --localalloc --physcpubind=31
bind32            = numactl --localalloc --physcpubind=32
bind33            = numactl --localalloc --physcpubind=33
bind34            = numactl --localalloc --physcpubind=34
bind35            = numactl --localalloc --physcpubind=35
bind36            = numactl --localalloc --physcpubind=36
bind37            = numactl --localalloc --physcpubind=37
bind38            = numactl --localalloc --physcpubind=38
bind39            = numactl --localalloc --physcpubind=39
bind40            = numactl --localalloc --physcpubind=40
bind41            = numactl --localalloc --physcpubind=41
bind42            = numactl --localalloc --physcpubind=42
bind43            = numactl --localalloc --physcpubind=43
bind44            = numactl --localalloc --physcpubind=44
bind45            = numactl --localalloc --physcpubind=45
bind46            = numactl --localalloc --physcpubind=46
bind47            = numactl --localalloc --physcpubind=47
bind48            = numactl --localalloc --physcpubind=48
bind49            = numactl --localalloc --physcpubind=49
bind50            = numactl --localalloc --physcpubind=50
bind51            = numactl --localalloc --physcpubind=51
bind52            = numactl --localalloc --physcpubind=52
bind53            = numactl --localalloc --physcpubind=53
bind54            = numactl --localalloc --physcpubind=54
bind55            = numactl --localalloc --physcpubind=55
bind56            = numactl --localalloc --physcpubind=56
bind57            = numactl --localalloc --physcpubind=57
bind58            = numactl --localalloc --physcpubind=58
bind59            = numactl --localalloc --physcpubind=59
bind60            = numactl --localalloc --physcpubind=60
bind61            = numactl --localalloc --physcpubind=61
bind62            = numactl --localalloc --physcpubind=62
bind63            = numactl --localalloc --physcpubind=63
submit = echo "$command" > run.sh ; $BIND bash run.sh
################################################################################
################################################################################
# peak copy counts: 32
510.parest_r,519.lbm_r,521.wrf_r,549.fotonik3d_r,554.roms_r=peak:
copies                  = 32
# Bind commands for assigning affinity:
bind0            = numactl --localalloc --physcpubind=0
bind1            = numactl --localalloc --physcpubind=1
bind2            = numactl --localalloc --physcpubind=2
bind3            = numactl --localalloc --physcpubind=3
bind4            = numactl --localalloc --physcpubind=4
bind5            = numactl --localalloc --physcpubind=5
bind6            = numactl --localalloc --physcpubind=6
bind7            = numactl --localalloc --physcpubind=7
bind8            = numactl --localalloc --physcpubind=8
bind9            = numactl --localalloc --physcpubind=9
bind10            = numactl --localalloc --physcpubind=10
bind11            = numactl --localalloc --physcpubind=11
bind12            = numactl --localalloc --physcpubind=12
bind13            = numactl --localalloc --physcpubind=13
bind14            = numactl --localalloc --physcpubind=14
bind15            = numactl --localalloc --physcpubind=15
bind16            = numactl --localalloc --physcpubind=16
bind17            = numactl --localalloc --physcpubind=17
bind18            = numactl --localalloc --physcpubind=18
bind19            = numactl --localalloc --physcpubind=19
bind20            = numactl --localalloc --physcpubind=20
bind21            = numactl --localalloc --physcpubind=21
bind22            = numactl --localalloc --physcpubind=22
bind23            = numactl --localalloc --physcpubind=23
bind24            = numactl --localalloc --physcpubind=24
bind25            = numactl --localalloc --physcpubind=25
bind26            = numactl --localalloc --physcpubind=26
bind27            = numactl --localalloc --physcpubind=27
bind28            = numactl --localalloc --physcpubind=28
bind29            = numactl --localalloc --physcpubind=29
bind30            = numactl --localalloc --physcpubind=30
bind31            = numactl --localalloc --physcpubind=31
submit = echo "$command" > run.sh ; $BIND bash run.sh
################################################################################
################################################################################
# peak copy counts: 8
503.bwaves_r=peak:
copies                  = 8
# Bind commands for assigning affinity:
bind0            = numactl --localalloc --physcpubind=0
bind1            = numactl --localalloc --physcpubind=4
bind2            = numactl --localalloc --physcpubind=8
bind3            = numactl --localalloc --physcpubind=12
bind4            = numactl --localalloc --physcpubind=16
bind5            = numactl --localalloc --physcpubind=20
bind6            = numactl --localalloc --physcpubind=24
bind7            = numactl --localalloc --physcpubind=28
submit = echo "$command" > run.sh ; $BIND bash run.sh
################################################################################
# Switch back to the default block after the include file:

default:
################################################################################
################################################################################

################################################################################
################################################################################
# The remainder of this file defines CPU2017 report parameters.
################################################################################
################################################################################
################################################################################
# SPEC CPU 2017 report header
################################################################################
license_num              =9066
tester                   =New H3C Technologies Co., Ltd.
test_sponsor             =New H3C Technologies Co., Ltd.
hw_vendor                =New H3C Technologies Co., Ltd.
hw_model000              =H3C UniServer R3950 G7 (AMD EPYC 9355)
hw_model001              =AMD EPYC 9355
#--------- If you install new compilers, edit this section --------------------
sw_compiler              =C/C++/Fortran: Version 5.0.0 of AOCC
################################################################################

################################################################################
# Hardware, firmware and software information
################################################################################
hw_avail                 =Oct-2024
sw_avail                 =Oct-2024
hw_cpu_name              =AMD EPYC 9355
hw_cpu_nominal_mhz       =3550
hw_cpu_max_mhz           =4400
hw_ncores                =32
hw_nthreadspercore       =2
hw_ncpuorder             =1 chip

hw_other                 =CPU Cooling: Air
fw_bios                  =Version 7.30.04 released Dec-2024
sw_base_ptrsize          =64-bit
hw_pcache                =32 KB I + 48 KB D on chip per core
hw_scache                =1 MB I+D on chip per core
hw_tcache000             =256 MB I+D on chip per chip, 32 MB shared / 4
hw_tcache001 = cores
hw_ocache                =None
sw_other                 =None

################################################################################
# Notes
################################################################################



# Enter notes_000 through notes_100 here.
notes_000                =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6


notes_005                =
notes_010                =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
notes_015                =is mitigated in the system as tested and documented.
notes_020                =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
notes_025                =is mitigated in the system as tested and documented.
notes_030                =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
notes_035                =is mitigated in the system as tested and documented.


notes_submit_000         ='numactl' was used to bind copies to the cores.
notes_submit_005         =See the configuration file for details.
notes_submit_010         =


notes_os_000             ='ulimit -s unlimited' was used to set environment stack size limit
notes_os_005             ='ulimit -l 2097152' was used to set environment locked pages in memory limit
notes_os_010             =
notes_os_015             =runcpu command invoked through numactl i.e.:
notes_os_020             =numactl --interleave=all runcpu <etc>
notes_os_025             =
notes_os_030             =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root.
notes_os_035             =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root.
notes_os_040             =To free node-local memory and avoid remote memory usage,
notes_os_045             ='sysctl -w vm.zone_reclaim_mode=1' run as root.
notes_os_050             =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root.
notes_os_055             =To disable address space layout randomization (ASLR) to reduce run-to-run
notes_os_060             =variability, 'sysctl -w kernel.randomize_va_space=0' run as root.
notes_os_065             =


notes_comp_000           =The AMD64 AOCC Compiler Suite is available at
notes_comp_005           =http://developer.amd.com/amd-aocc/
notes_comp_010           =
# notes_jemalloc_000       =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified)
# notes_jemalloc_005       =jemalloc 5.1.0 is available here:
# notes_jemalloc_010       =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2
# notes_jemalloc_015       =
# sw_other000              =jemalloc: jemalloc memory allocator library v5.1.0

################################################################################
# The following note fields describe platorm settings.
################################################################################

# example: (edit and uncomment as necessary)
# notes_plat_000 =BIOS settings:
# notes_plat_002 = TDP: 400
# notes_plat_004 = Determinism Slider set to Power
# notes_plat_006 = PPT: 400
# notes_plat_010 = NPS: 4
# notes_plat_011 = Workload Profile = CPU Intensive
# notes_plat_012 = TSME = Disabled
# notes_plat_014 = SEV Control = Disabled
# notes_plat_015 = Fan Speed: Maximum


################################################################################
# The following are custom fields:
################################################################################

# Use custom_fields to enter lines that are not listed here. For example:
# notes_plat_100         = Energy Bias set to Max Performance
# new_field              = Ambient temperature set to 10C


################################################################################
# The following fields must be set here for only Int benchmarks.
################################################################################
intrate:

sw_peak_ptrsize          =32/64-bit

notes_os_thp_000         =To enable Transparent Hugepages (THP) for all allocations,
notes_os_thp_005         ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and
notes_os_thp_010         ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
notes_os_thp_015         =


################################################################################
# The following fields must be set here for FP benchmarks.
################################################################################
fprate:

sw_peak_ptrsize          =64-bit

notes_os_thp_000         =To enable Transparent Hugepages (THP) for all allocations,
notes_os_thp_001         ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and
notes_os_thp_002         ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
notes_os_thp_003         =


################################################################################
# The following fields must be set here or they will be overwritten by sysinfo.
################################################################################

intrate,fprate:
hw_disk                  =1 x 960GB SSD
hw_memory000             =384 GB (12 x 32 GB 2Rx8 PC5-6400B-R, running at
hw_memory001             =6000)
hw_memory002             =

hw_nchips                =1
prepared_by              =prepared by unknown
sw_file                  =ext4
sw_os000                 =Ubuntu 24.04.1 LTS
sw_os001                 =kernel version                              # ex: Kernel 4.4.0-87-generic
sw_state                 =Run level 5 (multi-user)

################################################################################
# End of inc file
################################################################################
# Switch back to the default block after the include file:

default:

# ---- End inclusion of '/home/cpu2017/config/amd_rate_aocc500_znver5_A1.inc'
  # Switch back to default block after the include file:
default:
  fail_build             = yes # FIX THIS SO THAT CHECKSUMS WILL BE ENFORCED!
%elif '%{allow_build}' eq 'true'
  # If you intend to rebuild, be sure to set the library paths either in the
  # build script or here:
  preENV_LIBRARY_PATH   = $[top]/%{build_lib_dir}/lib:$[top]/%{build_lib_dir}/lib32:%{ENV_LIBRARY_PATH}
% define build_ncpus 64    # controls number of simultaneous compiles
  fail_build             = 0
  makeflags              = --jobs=%{build_ncpus} --load-average=%{build_ncpus}
%else
% error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated
%endif


################################################################################
# Enable automated data collection per benchmark
################################################################################
# Data collection is not enabled for reportable runs.

# teeout is necessary to get data collection stdout into the logs. Best
# practices for the individual data collection items would be to have
# them store important output in separate files.  Filenames could be
# constructed from $SPEC (environment), $lognum (result number from runcpu),
# and benchmark name/number.
teeout = yes

# Run runcpu with '-v 35' (or greater) to log lists of variables which can
# be used in substitutions as below.
# For CPU2006, change $label to $ext
%define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu'
%define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters}
%define data-collection-stop  $[top]/data-collection/data-collection stop %{data-collection-parameters}
monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop}


################################################################################
# Header settings
################################################################################
backup_config            = 0 # set to 0 if you do not want backup files
bench_post_setup         = sync
# command_add_redirect: If set, the generated ${command} will include
# redirection operators (stdout, stderr), which are passed along to the shell
# that executes the command. If this variable is not set, specinvoke does the
# redirection.
command_add_redirect     = yes
env_vars                 = yes
flagsurl000              = http://www.spec.org/cpu2017/flags/aocc500-flags.2024-10-10.xml
flagsurl001 = http://www.spec.org/cpu2017/flags/New_H3C-Platform-AMD-Settings-V1.5-Turin.xml
#flagsurl02              = $[top]/%{platform_file_name}
# label: User defined extension string that tags your binaries & directories:
label                    = %{ext}
line_width               = 1020
log_line_width           = 1020
mean_anyway              = yes
output_format            = all
reportable               = yes
size                     = test,train,ref
teeout                   = yes
teerunout                = yes
tune                     = base,peak

################################################################################
# Include the flags file:
################################################################################

#include: %{flags_inc_file_name}
#  ----- Begin inclusion of 'amd_rate_aocc500_znver5_A1_flags.inc'
############################################################################
################################################################################
# AMD AOCC 5.0.0 SPEC CPU2017 V1.1.9 Rate Configuration Flags for AMD64 Linux
################################################################################
# Compilers
################################################################################

default:

CC                       = clang -m64
CXX                      = clang++ -m64 -std=c++14
FC                       = flang -m64
CLD                      = clang -m64
CXXLD                    = clang++ -m64 -std=c++14
FLD                      = flang -m64
CC_VERSION_OPTION        = --version
CXX_VERSION_OPTION       = --version
FC_VERSION_OPTION        = --version

################################################################################
# Default libraries and variables
################################################################################

default:

# Libraries:
EXTRA_LIBS               = -lamdalloc \
                           -lamdlibm \
                           -lm \
                           -ldl

MATHLIBOPT               = #clearing this variable or else SPEC will set it to -lm

VECMATHLIB               = -fveclib=AMDLIBM

# Variables:
OPT_ROOT                 = -march=znver5 \
                           $(VECMATHLIB) \
                           -ffast-math

OPT_ROOT_BASE            = -O3 \
                           $(OPT_ROOT)

OPT_ROOT_PEAK            = -Ofast \
                           $(OPT_ROOT) \
                           -flto


################################################################################
# Portability and workaround include files
################################################################################

# Portability flags include file:
#include: %{port_flags_inc_file_name}
#  ----- Begin inclusion of 'amd_rate_aocc500_znver5_A1_flags_portability.inc'
############################################################################
################################################################################
# AMD AOCC 5.0.0 SPEC CPU2017 V1.1.9 Rate Portability Flags for AMD64 Linux
################################################################################

default:
# data model applies to all benchmarks
EXTRA_PORTABILITY        = -DSPEC_LP64

# *** Benchmark-specific portability ***
# Anything other than the data model is only allowed where a need is proven.
# (ordered by last 2 digits of benchmark number)

500.perlbench_r:  #lang='C'
PORTABILITY              = -DSPEC_LINUX_X64

521.wrf_r:  #lang='F,C'
CPORTABILITY             = -DSPEC_CASE_FLAG
FPORTABILITY             = -Mbyteswapio

523.xalancbmk_r:  #lang='CXX'
PORTABILITY              = -DSPEC_LINUX

526.blender_r:  #lang='CXX,C'
CPORTABILITY             = -funsigned-char

527.cam4_r:  #lang='F,C'
PORTABILITY              = -DSPEC_CASE_FLAG

################################################################################
# End Portability Flags
################################################################################
# ---- End inclusion of '/home/cpu2017/config/amd_rate_aocc500_znver5_A1_flags_portability.inc'

# Workaround flags include file:
#include: %{workaround_flags_inc_file_name}
#  ----- Begin inclusion of 'amd_rate_aocc500_znver5_A1_flags_workaround.inc'
############################################################################
################################################################################
# AMD AOCC 5.0.0 SPEC CPU2017 V1.1.9 Rate Workaround Flags for AMD64 Linux
################################################################################
# The workarounds in this section would not qualify under the SPEC CPU
# PORTABILITY rule.
#   - In peak, they can be set as needed for individual benchmarks.
#   - In base, individual settings are not allowed; set for whole suite.
# Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them.
#
# See:
#     https://www.spec.org/cpu2017/Docs/runrules.html#portability
#     https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags

#######################
# Default workarounds #
#######################

default:
# Allow unused compile/link arguments without triggering warnings during build:
EXTRA_CFLAGS             = -Wno-unused-command-line-argument
EXTRA_CXXFLAGS           = -Wno-unused-command-line-argument
EXTRA_FFLAGS             = -Wno-unused-command-line-argument
LDOPTIONS                = -Wno-unused-command-line-argument

####################
# Base workarounds #
####################
#
# *** NONE ***
#

##############################
# Integer workarounds - base #
##############################
#
intrate=base:
# The following is necessary for 502/602 gcc:
EXTRA_LDFLAGS            = -z muldefs

#########################
# FP workarounds - base #
#########################
#
# *** NONE ***
#

####################
# Peak workarounds #
####################
#
# *** NONE ***
#

##############################
# Integer workarounds - peak #
##############################

502.gcc_r=peak:  #lang='C'
EXTRA_CFLAGS             = -Wno-unused-command-line-argument \
                           -fgnu89-inline
EXTRA_LDFLAGS            = -z muldefs

#####################################
# Floating Point workarounds - peak #
#####################################
#
# *** NONE ***
#
# ---- End inclusion of '/home/cpu2017/config/amd_rate_aocc500_znver5_A1_flags_workaround.inc'

################################################################################
# Tuning Flags
################################################################################

#####################
# Base tuning flags #
#####################

default=base:

COPTIMIZE                = $(OPT_ROOT_BASE) \
                           -fno-PIE \
                           -no-pie \
                           -flto \
                           -fstruct-layout=7 \
                           -mllvm -unroll-threshold=50 \
                           -mllvm -inline-threshold=1000 \
                           -fremap-arrays \
                           -fstrip-mining \
                           -mllvm -reduce-array-computations=3 \
                           -zopt

CXXOPTIMIZE              = $(OPT_ROOT_BASE) \
                           -flto \
                           -mllvm -unroll-threshold=100 \
                           -mllvm -loop-unswitch-threshold=200000 \
                           -mllvm -reduce-array-computations=3 \
                           -zopt

FOPTIMIZE                = $(OPT_ROOT_BASE) \
                           -flto \
                           -Mrecursive \
                           -funroll-loops \
                           -mllvm -lsr-in-nested-loop \
                           -mllvm -reduce-array-computations=3 \
                           -fepilog-vectorization-of-inductions \
                           -zopt


LDCXXFLAGS               = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false \
                           -Wl,-mllvm -Wl,-extra-inliner

LDCFLAGS                 = -Wl,-mllvm -Wl,-ldist-scalar-expand \
                           -fenable-aggressive-gather

LDFLAGS                  = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \
                           -Wl,-mllvm -Wl,-reduce-array-computations=3

LDFFLAGS                 = -Wl,-mllvm -Wl,-enable-X86-prefetching \
                           -Wl,-mllvm -Wl,-enable-aggressive-gather=true \
                           -Wl,-mllvm -Wl,-enable-masked-gather-sequence=false

# Libraries:
EXTRA_LIBS               = -lamdlibm \
                           -lm \
                           -lamdalloc \
                           -lflang \
                           -ldl


EXTRA_FLIBS              =

# Don't put the AMD and mvec math libraries in MATH_LIBS because it will trigger a reporting issue
# because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear
# out MATH_LIBS.
MATH_LIBS               =


########################
# intrate tuning flags #
########################

intrate:

FOPTIMIZE                = $(OPT_ROOT_BASE) \
                           -flto \
                           -fepilog-vectorization-of-inductions \
                           -mllvm -optimize-strided-mem-cost \
                           -floop-transform \
                           -mllvm -unroll-aggressive \
                           -mllvm -unroll-threshold=500

EXTRA_CXXOPTIMIZE        = -fno-PIE \
                           -no-pie \
                           -fvirtual-function-elimination \
                           -fvisibility=hidden \
                           -mllvm -do-block-reorder=advanced

LDCFLAGS                 = -Wl,-mllvm -Wl,-ldist-scalar-expand \
                           -fenable-aggressive-gather \
                           -Wl,-mllvm -Wl,-extra-inliner

LDCXXFLAGS               = -Wl,-mllvm -Wl,-do-block-reorder=advanced

LDFFLAGS                 = -Wl,-mllvm -Wl,-inline-recursion=4 \
                           -Wl,-mllvm -Wl,-lsr-in-nested-loop \
                           -Wl,-mllvm -Wl,-enable-iv-split

# Libraries:

EXTRA_LIBS               = -lamdlibm \
                           -lm \
                           -lflang


EXTRA_CLIBS              = -lamdalloc-ext \
                           -ldl


EXTRA_CXXLIBS            = -lamdalloc-ext \
                           -ldl


EXTRA_FLIBS              = -lamdalloc \
                           -ldl


#####################
# Peak tuning flags #
#####################

default=peak:

COPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -fstruct-layout=7 \
                           -mllvm -unroll-threshold=50 -fremap-arrays \
                           -fstrip-mining \
                           -mllvm -inline-threshold=1000 \
                           -mllvm -reduce-array-computations=3 \
                           -zopt

CXXOPTIMIZE              = $(OPT_ROOT_PEAK) \
                           -mllvm -unroll-threshold=100 \
                           -mllvm -reduce-array-computations=3 \
                           -zopt

FOPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -Mrecursive \
                           -mllvm -reduce-array-computations=3 \
                           -fepilog-vectorization-of-inductions \
                           -zopt

LDFLAGS                  = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \
                           -Wl,-mllvm -Wl,-reduce-array-computations=3

LDCXXFLAGS               = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false


feedback                 = 0
PASS1_CFLAGS             = -fprofile-instr-generate
PASS2_CFLAGS             = -fprofile-instr-use
PASS1_FFLAGS             = -fprofile-generate
PASS2_FFLAGS             = -fprofile-use
PASS1_CXXFLAGS           = -fprofile-instr-generate
PASS2_CXXFLAGS           = -fprofile-instr-use
PASS1_LDFLAGS            = -fprofile-instr-generate
PASS2_LDFLAGS            = -fprofile-instr-use
fdo_run1                 = $command ; llvm-profdata merge --output=default.profdata *.profraw

#libraries:

EXTRA_LIBS               = -lamdlibm \
                           -lm \
                           -lamdalloc \
                           -ldl

EXTRA_FLIBS              = -lflang

########################################
# Benchmark specific peak tuning flags #
########################################

500.perlbench_r=peak:  #lang='C'
COPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -fstruct-layout=7 \
                           -mllvm -unroll-threshold=50 \
                           -fremap-arrays \
                           -mllvm -inline-threshold=1000 \
                           -mllvm -reduce-array-computations=3 \
                           -faggressive-loop-transform \
                           -fvector-transform \
                           -fscalar-transform
feedback                 = 1

502.gcc_r=peak:  #lang='C'
EXTRA_PORTABILITY        = -D_FILE_OFFSET_BITS=64
CC                       = clang -m32
CLD                      = clang -m32 -L/usr/lib32
EXTRA_LIBS               =
EXTRA_CLIBS              = -L$[AMDALLOC_LIB32_PATH] -lamdalloc
MATHLIBOPT               = -lm
LDFLAGS                  = -flto

505.mcf_r=peak:  #lang='C'
LDCFLAGS                 = -Wl,-mllvm -Wl,-extra-inliner

507.cactuBSSN_r=peak:
CXXOPTIMIZE              = $(OPT_ROOT_PEAK) \
                           -mllvm -unroll-threshold=100 \
                           -mllvm -loop-unswitch-threshold=200000 \
                           -mllvm -reduce-array-computations=3 \
                           -faggressive-loop-transform \
                           -fvector-transform \
                           -fscalar-transform

EXTRA_LIBS               += $(EXTRA_FLIBS) #adding flang libs to cxx linker

510.parest_r=peak:
LDFLAGS                  = -flto \
                           -Wl,-mllvm -Wl,-suppress-fmas

511.povray_r=peak:  #lang='CXX,C'
COPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -fstruct-layout=7 \
                           -mllvm -unroll-threshold=50 \
                           -mllvm -inline-threshold=1000 \
                           -fremap-arrays \
                           -mllvm -reduce-array-computations=3 \
                           -zopt
CXXOPTIMIZE              = $(OPT_ROOT_PEAK) \
                           -mllvm -unroll-threshold=100 \
                           -mllvm -loop-unswitch-threshold=200000 \
                           -mllvm -reduce-array-computations=3 \
                           -zopt

LDCXXFLAGS               = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false \
                           -Wl,-mllvm -Wl,-extra-inliner

LDCFLAGS                 = -Wl,-mllvm -Wl,-ldist-scalar-expand \
                           -fenable-aggressive-gather
EXTRA_LIBS               = -lamdlibm -lm -lamdalloc -ldl

520.omnetpp_r=peak:  #lang='CXX`
EXTRA_LIBS               = -lamdlibm -lm -lamdalloc-ext -ldl

523.xalancbmk_r=peak:  #lang='CXX`
EXTRA_CXXOPTIMIZE        = -fvirtual-function-elimination \
                           -fvisibility=hidden \
                           -mllvm -do-block-reorder=advanced
LDCXXFLAGS               = -Wl,-mllvm -Wl,-do-block-reorder=advanced
EXTRA_LIBS               = -lamdlibm -lm -lflang
EXTRA_CXXLIBS            = -lamdalloc-ext -ldl
ENV_MALLOC_CONF          = thp:always

525.x264_r=peak:  #lang='C'
basepeak                 = yes

527.cam4_r=peak:
COPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -fstruct-layout=7 \
                           -mllvm -unroll-threshold=50 \
                           -mllvm -inline-threshold=1000 \
                           -fremap-arrays \
                           -mllvm -reduce-array-computations=3 \
                           -zopt
FOPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -Mrecursive \
                           -funroll-loops \
                           -mllvm -lsr-in-nested-loop \
                           -mllvm -reduce-array-computations=3 \
                           -fepilog-vectorization-of-inductions \
                           -zopt
LDCFLAGS                 = -Wl,-mllvm -Wl,-ldist-scalar-expand \
                           -fenable-aggressive-gather
LDFFLAGS                 = -Wl,-mllvm -Wl,-enable-X86-prefetching

531.deepsjeng_r=peak:  #lang='CXX'
CXXOPTIMIZE              = $(OPT_ROOT_PEAK) \
                           -mllvm -unroll-threshold=100\
                           -mllvm -loop-unswitch-threshold=200000 \
                           -mllvm -reduce-array-computations=3 \
                           -zopt
EXTRA_CXXOPTIMIZE        = -fvirtual-function-elimination \
                           -fvisibility=hidden
LDCXXFLAGS               =
EXTRA_LIBS               = -lamdlibm -lm
EXTRA_CXXLIBS            = -lamdalloc-ext -ldl


544.nab_r=peak:
LDFLAGS                  = -flto \
                           -Wl,-mllvm -Wl,-ldist-scalar-expand \
                           -fenable-aggressive-gather

549.fotonik3d_r=peak:
FOPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -Mrecursive \
                           -mllvm -reduce-array-computations=3 \
                           -fepilog-vectorization-of-inductions \
                           -fvector-transform \
                           -fscalar-transform

521.wrf_r=peak:
FOPTIMIZE                = $(OPT_ROOT) \
                           -Ofast \
                           -Mrecursive \
                           -funroll-loops \
                            -mllvm -lsr-in-nested-loop \
                           -mllvm -reduce-array-computations=3 \
                           -Wno-unused-command-line-argument \
                           -fepilog-vectorization-of-inductions \
                           -zopt

554.roms_r=peak:
FOPTIMIZE                = $(OPT_ROOT_PEAK) \
                           -Mrecursive \
                           -mllvm -reduce-array-computations=3 \
                           -fepilog-vectorization-of-inductions \
                           -zopt
# ---- End inclusion of '/home/cpu2017/config/amd_rate_aocc500_znver5_A1_flags.inc'


# The following settings were obtained by running the sysinfo_program
# 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06)
default:
notes_plat_sysinfo_000 =
notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017/bin/sysinfo
notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197
notes_plat_sysinfo_015 = running on h3c Mon Jan  6 08:34:37 2025
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities.
notes_plat_sysinfo_030 =
notes_plat_sysinfo_035 = ------------------------------------------------------------
notes_plat_sysinfo_040 = Table of contents
notes_plat_sysinfo_045 = ------------------------------------------------------------
notes_plat_sysinfo_050 =  1. uname -a
notes_plat_sysinfo_055 =  2. w
notes_plat_sysinfo_060 =  3. Username
notes_plat_sysinfo_065 =  4. ulimit -a
notes_plat_sysinfo_070 =  5. sysinfo process ancestry
notes_plat_sysinfo_075 =  6. /proc/cpuinfo
notes_plat_sysinfo_080 =  7. lscpu
notes_plat_sysinfo_085 =  8. numactl --hardware
notes_plat_sysinfo_090 =  9. /proc/meminfo
notes_plat_sysinfo_095 = 10. who -r
notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 255 (255.4-1ubuntu8.4)
notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files
notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline
notes_plat_sysinfo_115 = 14. cpupower frequency-info
notes_plat_sysinfo_120 = 15. sysctl
notes_plat_sysinfo_125 = 16. /sys/kernel/mm/transparent_hugepage
notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage/khugepaged
notes_plat_sysinfo_135 = 18. OS release
notes_plat_sysinfo_140 = 19. Disk information
notes_plat_sysinfo_145 = 20. /sys/devices/virtual/dmi/id
notes_plat_sysinfo_150 = 21. dmidecode
notes_plat_sysinfo_155 = 22. BIOS
notes_plat_sysinfo_160 = ------------------------------------------------------------
notes_plat_sysinfo_165 =
notes_plat_sysinfo_170 = ------------------------------------------------------------
notes_plat_sysinfo_175 = 1. uname -a
notes_plat_sysinfo_180 =   Linux h3c 6.8.0-45-generic #45-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug 30 12:02:04 UTC 2024 x86_64 x86_64 x86_64
notes_plat_sysinfo_185 =   GNU/Linux
notes_plat_sysinfo_190 =
notes_plat_sysinfo_195 = ------------------------------------------------------------
notes_plat_sysinfo_200 = 2. w
notes_plat_sysinfo_205 =    08:34:37 up  2:07,  3 users,  load average: 0.08, 0.02, 0.01
notes_plat_sysinfo_210 =   USER     TTY      FROM             LOGIN@   IDLE   JCPU   PCPU WHAT
notes_plat_sysinfo_215 =   root     tty1     -                06:32    2:02m  0.06s   ?    -bash
notes_plat_sysinfo_220 =   root              172.17.53.33     06:34    2:06m  0.00s  3.17s sshd: root@pts/0
notes_plat_sysinfo_225 =   root              172.17.53.33     06:34    2:06m  0.00s  0.14s sshd: root@notty
notes_plat_sysinfo_230 =
notes_plat_sysinfo_235 = ------------------------------------------------------------
notes_plat_sysinfo_240 = 3. Username
notes_plat_sysinfo_245 =   From environment variable $USER:  root
notes_plat_sysinfo_250 =
notes_plat_sysinfo_255 = ------------------------------------------------------------
notes_plat_sysinfo_260 = 4. ulimit -a
notes_plat_sysinfo_265 =   time(seconds)        unlimited
notes_plat_sysinfo_270 =   file(blocks)         unlimited
notes_plat_sysinfo_275 =   data(kbytes)         unlimited
notes_plat_sysinfo_280 =   stack(kbytes)        unlimited
notes_plat_sysinfo_285 =   coredump(blocks)     0
notes_plat_sysinfo_290 =   memory(kbytes)       unlimited
notes_plat_sysinfo_295 =   locked memory(kbytes) 2097152
notes_plat_sysinfo_300 =   process              1545658
notes_plat_sysinfo_305 =   nofiles              1024
notes_plat_sysinfo_310 =   vmemory(kbytes)      unlimited
notes_plat_sysinfo_315 =   locks                unlimited
notes_plat_sysinfo_320 =   rtprio               0
notes_plat_sysinfo_325 =
notes_plat_sysinfo_330 = ------------------------------------------------------------
notes_plat_sysinfo_335 = 5. sysinfo process ancestry
notes_plat_sysinfo_340 =  /sbin/init
notes_plat_sysinfo_345 =  sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
notes_plat_sysinfo_350 =  sshd: root@pts/0
notes_plat_sysinfo_355 =  -bash
notes_plat_sysinfo_360 =  python3 ./run_amd_rate_aocc500_znver5_A1.py
notes_plat_sysinfo_365 =  /bin/bash ./amd_rate_aocc500_znver5_A1.sh
notes_plat_sysinfo_370 =  runcpu --config amd_rate_aocc500_znver5_A1.cfg --tune all --reportable --iterations 3 intrate
notes_plat_sysinfo_375 =  runcpu --configfile amd_rate_aocc500_znver5_A1.cfg --tune all --reportable --iterations 3 --nopower
notes_plat_sysinfo_380 =    --runmode rate --tune base:peak --size test:train:refrate intrate --nopreenv --note-preenv --logfile
notes_plat_sysinfo_385 =    $SPEC/tmp/CPU2017.001/templogs/preenv.intrate.001.0.log --lognum 001.0 --from_runcpu 2
notes_plat_sysinfo_390 =  specperl $SPEC/bin/sysinfo
notes_plat_sysinfo_395 = $SPEC = /home/cpu2017
notes_plat_sysinfo_400 =
notes_plat_sysinfo_405 = ------------------------------------------------------------
notes_plat_sysinfo_410 = 6. /proc/cpuinfo
notes_plat_sysinfo_415 =     model name      : AMD EPYC 9355 32-Core Processor
notes_plat_sysinfo_420 =     vendor_id       : AuthenticAMD
notes_plat_sysinfo_425 =     cpu family      : 26
notes_plat_sysinfo_430 =     model           : 2
notes_plat_sysinfo_435 =     stepping        : 1
notes_plat_sysinfo_440 =     microcode       : 0xb00211a
notes_plat_sysinfo_445 =     bugs            : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass
notes_plat_sysinfo_450 =     TLB size        : 192 4K pages
notes_plat_sysinfo_455 =     cpu cores       : 32
notes_plat_sysinfo_460 =     siblings        : 64
notes_plat_sysinfo_465 =     1 physical ids (chips)
notes_plat_sysinfo_470 =     64 processors (hardware threads)
notes_plat_sysinfo_475 =     physical id 0: core ids 0-3,8-11,16-19,24-27,32-35,40-43,48-51,56-59
notes_plat_sysinfo_480 =     physical id 0: apicids 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119
notes_plat_sysinfo_485 =   Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
notes_plat_sysinfo_490 =   virtualized systems.  Use the above data carefully.
notes_plat_sysinfo_495 =
notes_plat_sysinfo_500 = ------------------------------------------------------------
notes_plat_sysinfo_505 = 7. lscpu
notes_plat_sysinfo_510 =
notes_plat_sysinfo_515 = From lscpu from util-linux 2.39.3:
notes_plat_sysinfo_520 =   Architecture:                         x86_64
notes_plat_sysinfo_525 =   CPU op-mode(s):                       32-bit, 64-bit
notes_plat_sysinfo_530 =   Address sizes:                        52 bits physical, 57 bits virtual
notes_plat_sysinfo_535 =   Byte Order:                           Little Endian
notes_plat_sysinfo_540 =   CPU(s):                               64
notes_plat_sysinfo_545 =   On-line CPU(s) list:                  0-63
notes_plat_sysinfo_550 =   Vendor ID:                            AuthenticAMD
notes_plat_sysinfo_555 =   BIOS Vendor ID:                       Advanced Micro Devices, Inc.
notes_plat_sysinfo_560 =   Model name:                           AMD EPYC 9355 32-Core Processor
notes_plat_sysinfo_565 =   BIOS Model name:                      AMD EPYC 9355 32-Core Processor                 Unknown CPU @ 3.5GHz
notes_plat_sysinfo_570 =   BIOS CPU family:                      107
notes_plat_sysinfo_575 =   CPU family:                           26
notes_plat_sysinfo_580 =   Model:                                2
notes_plat_sysinfo_585 =   Thread(s) per core:                   2
notes_plat_sysinfo_590 =   Core(s) per socket:                   32
notes_plat_sysinfo_595 =   Socket(s):                            1
notes_plat_sysinfo_600 =   Stepping:                             1
notes_plat_sysinfo_605 =   Frequency boost:                      enabled
notes_plat_sysinfo_610 =   CPU(s) scaling MHz:                   47%
notes_plat_sysinfo_615 =   CPU max MHz:                          4413.2319
notes_plat_sysinfo_620 =   CPU min MHz:                          1500.0000
notes_plat_sysinfo_625 =   BogoMIPS:                             7089.64
notes_plat_sysinfo_630 =   Flags:                                fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
notes_plat_sysinfo_635 =                                         pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
notes_plat_sysinfo_640 =                                         rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid
notes_plat_sysinfo_645 =                                         extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid
notes_plat_sysinfo_650 =                                         sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm
notes_plat_sysinfo_655 =                                         cmp_legacy extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
notes_plat_sysinfo_660 =                                         osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext
notes_plat_sysinfo_665 =                                         perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2
notes_plat_sysinfo_670 =                                         ibrs ibpb stibp ibrs_enhanced vmmcall fsgsbase tsc_adjust bmi1 avx2
notes_plat_sysinfo_675 =                                         smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap
notes_plat_sysinfo_680 =                                         avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt
notes_plat_sysinfo_685 =                                         xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
notes_plat_sysinfo_690 =                                         cqm_mbm_local user_shstk avx_vnni avx512_bf16 clzero irperf
notes_plat_sysinfo_695 =                                         xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt lbrv svm_lock
notes_plat_sysinfo_700 =                                         nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter
notes_plat_sysinfo_705 =                                         pfthreshold avic v_vmsave_vmload vgif x2avic v_spec_ctrl vnmi
notes_plat_sysinfo_710 =                                         avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq
notes_plat_sysinfo_715 =                                         avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid bus_lock_detect
notes_plat_sysinfo_720 =                                         movdiri movdir64b overflow_recov succor smca fsrm avx512_vp2intersect
notes_plat_sysinfo_725 =                                         flush_l1d debug_swap
notes_plat_sysinfo_730 =   L1d cache:                            1.5 MiB (32 instances)
notes_plat_sysinfo_735 =   L1i cache:                            1 MiB (32 instances)
notes_plat_sysinfo_740 =   L2 cache:                             32 MiB (32 instances)
notes_plat_sysinfo_745 =   L3 cache:                             256 MiB (8 instances)
notes_plat_sysinfo_750 =   NUMA node(s):                         8
notes_plat_sysinfo_755 =   NUMA node0 CPU(s):                    0-3,32-35
notes_plat_sysinfo_760 =   NUMA node1 CPU(s):                    4-7,36-39
notes_plat_sysinfo_765 =   NUMA node2 CPU(s):                    8-11,40-43
notes_plat_sysinfo_770 =   NUMA node3 CPU(s):                    12-15,44-47
notes_plat_sysinfo_775 =   NUMA node4 CPU(s):                    16-19,48-51
notes_plat_sysinfo_780 =   NUMA node5 CPU(s):                    20-23,52-55
notes_plat_sysinfo_785 =   NUMA node6 CPU(s):                    24-27,56-59
notes_plat_sysinfo_790 =   NUMA node7 CPU(s):                    28-31,60-63
notes_plat_sysinfo_795 =   Vulnerability Gather data sampling:   Not affected
notes_plat_sysinfo_800 =   Vulnerability Itlb multihit:          Not affected
notes_plat_sysinfo_805 =   Vulnerability L1tf:                   Not affected
notes_plat_sysinfo_810 =   Vulnerability Mds:                    Not affected
notes_plat_sysinfo_815 =   Vulnerability Meltdown:               Not affected
notes_plat_sysinfo_820 =   Vulnerability Mmio stale data:        Not affected
notes_plat_sysinfo_825 =   Vulnerability Reg file data sampling: Not affected
notes_plat_sysinfo_830 =   Vulnerability Retbleed:               Not affected
notes_plat_sysinfo_835 =   Vulnerability Spec rstack overflow:   Not affected
notes_plat_sysinfo_840 =   Vulnerability Spec store bypass:      Mitigation; Speculative Store Bypass disabled via prctl
notes_plat_sysinfo_845 =   Vulnerability Spectre v1:             Mitigation; usercopy/swapgs barriers and __user pointer sanitization
notes_plat_sysinfo_850 =   Vulnerability Spectre v2:             Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP
notes_plat_sysinfo_855 =                                         always-on; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected
notes_plat_sysinfo_860 =   Vulnerability Srbds:                  Not affected
notes_plat_sysinfo_865 =   Vulnerability Tsx async abort:        Not affected
notes_plat_sysinfo_870 =
notes_plat_sysinfo_875 = From lscpu --cache:
notes_plat_sysinfo_880 =      NAME ONE-SIZE ALL-SIZE WAYS TYPE        LEVEL  SETS PHY-LINE COHERENCY-SIZE
notes_plat_sysinfo_885 =      L1d       48K     1.5M   12 Data            1    64        1             64
notes_plat_sysinfo_890 =      L1i       32K       1M    8 Instruction     1    64        1             64
notes_plat_sysinfo_895 =      L2         1M      32M   16 Unified         2  1024        1             64
notes_plat_sysinfo_900 =      L3        32M     256M   16 Unified         3 32768        1             64
notes_plat_sysinfo_905 =
notes_plat_sysinfo_910 = ------------------------------------------------------------
notes_plat_sysinfo_915 = 8. numactl --hardware
notes_plat_sysinfo_920 = NOTE: a numactl 'node' might or might not correspond to a physical chip.
notes_plat_sysinfo_925 =   available: 8 nodes (0-7)
notes_plat_sysinfo_930 =   node 0 cpus: 0-3,32-35
notes_plat_sysinfo_935 =   node 0 size: 47921 MB
notes_plat_sysinfo_940 =   node 0 free: 47386 MB
notes_plat_sysinfo_945 =   node 1 cpus: 4-7,36-39
notes_plat_sysinfo_950 =   node 1 size: 48381 MB
notes_plat_sysinfo_955 =   node 1 free: 48192 MB
notes_plat_sysinfo_960 =   node 2 cpus: 8-11,40-43
notes_plat_sysinfo_965 =   node 2 size: 48381 MB
notes_plat_sysinfo_970 =   node 2 free: 48132 MB
notes_plat_sysinfo_975 =   node 3 cpus: 12-15,44-47
notes_plat_sysinfo_980 =   node 3 size: 48381 MB
notes_plat_sysinfo_985 =   node 3 free: 48200 MB
notes_plat_sysinfo_990 =   node 4 cpus: 16-19,48-51
notes_plat_sysinfo_995 =   node 4 size: 48381 MB
notes_plat_sysinfo_1000=   node 4 free: 48161 MB
notes_plat_sysinfo_1005=   node 5 cpus: 20-23,52-55
notes_plat_sysinfo_1010=   node 5 size: 48381 MB
notes_plat_sysinfo_1015=   node 5 free: 48171 MB
notes_plat_sysinfo_1020=   node 6 cpus: 24-27,56-59
notes_plat_sysinfo_1025=   node 6 size: 48337 MB
notes_plat_sysinfo_1030=   node 6 free: 48160 MB
notes_plat_sysinfo_1035=   node 7 cpus: 28-31,60-63
notes_plat_sysinfo_1040=   node 7 size: 48326 MB
notes_plat_sysinfo_1045=   node 7 free: 48146 MB
notes_plat_sysinfo_1050=   node distances:
notes_plat_sysinfo_1055=   node   0   1   2   3   4   5   6   7
notes_plat_sysinfo_1060=     0:  10  11  12  12  12  12  12  12
notes_plat_sysinfo_1065=     1:  11  10  12  12  12  12  12  12
notes_plat_sysinfo_1070=     2:  12  12  10  11  12  12  12  12
notes_plat_sysinfo_1075=     3:  12  12  11  10  12  12  12  12
notes_plat_sysinfo_1080=     4:  12  12  12  12  10  11  12  12
notes_plat_sysinfo_1085=     5:  12  12  12  12  11  10  12  12
notes_plat_sysinfo_1090=     6:  12  12  12  12  12  12  10  11
notes_plat_sysinfo_1095=     7:  12  12  12  12  12  12  11  10
notes_plat_sysinfo_1100=
notes_plat_sysinfo_1105= ------------------------------------------------------------
notes_plat_sysinfo_1110= 9. /proc/meminfo
notes_plat_sysinfo_1115=    MemTotal:       395767560 kB
notes_plat_sysinfo_1120=
notes_plat_sysinfo_1125= ------------------------------------------------------------
notes_plat_sysinfo_1130= 10. who -r
notes_plat_sysinfo_1135=   run-level 5 Jan 6 06:27
notes_plat_sysinfo_1140=
notes_plat_sysinfo_1145= ------------------------------------------------------------
notes_plat_sysinfo_1150= 11. Systemd service manager version: systemd 255 (255.4-1ubuntu8.4)
notes_plat_sysinfo_1155=   Default Target  Status
notes_plat_sysinfo_1160=   graphical       running
notes_plat_sysinfo_1165=
notes_plat_sysinfo_1170= ------------------------------------------------------------
notes_plat_sysinfo_1175= 12. Services, from systemctl list-unit-files
notes_plat_sysinfo_1180=   STATE            UNIT FILES
notes_plat_sysinfo_1185=   enabled          apparmor apport blk-availability cloud-config cloud-final cloud-init cloud-init-local
notes_plat_sysinfo_1190=                    console-setup e2scrub_reap finalrd getty@ gpu-manager grub-common grub-initrd-fallback
notes_plat_sysinfo_1195=                    keyboard-setup lm-sensors lvm2-monitor multipathd networkd-dispatcher open-iscsi pollinate
notes_plat_sysinfo_1200=                    secureboot-db setvtrgb systemd-networkd systemd-networkd-wait-online systemd-pstore
notes_plat_sysinfo_1205=                    systemd-resolved systemd-timesyncd thermald
notes_plat_sysinfo_1210=   enabled-runtime  netplan-ovs-cleanup systemd-fsck-root systemd-remount-fs
notes_plat_sysinfo_1215=   disabled         console-getty debug-shell iscsid serial-getty@ ssh systemd-boot-check-no-failures
notes_plat_sysinfo_1220=                    systemd-confext systemd-network-generator systemd-networkd-wait-online@
notes_plat_sysinfo_1225=                    systemd-pcrlock-file-system systemd-pcrlock-firmware-code systemd-pcrlock-firmware-config
notes_plat_sysinfo_1230=                    systemd-pcrlock-machine-id systemd-pcrlock-make-policy
notes_plat_sysinfo_1235=                    systemd-pcrlock-secureboot-authority systemd-pcrlock-secureboot-policy systemd-sysext
notes_plat_sysinfo_1240=                    systemd-time-wait-sync upower
notes_plat_sysinfo_1245=   indirect         systemd-sysupdate systemd-sysupdate-reboot
notes_plat_sysinfo_1250=   masked           cryptdisks cryptdisks-early hwclock multipath-tools-boot sudo x11-common
notes_plat_sysinfo_1255=
notes_plat_sysinfo_1260= ------------------------------------------------------------
notes_plat_sysinfo_1265= 13. Linux kernel boot-time arguments, from /proc/cmdline
notes_plat_sysinfo_1270=   BOOT_IMAGE=/vmlinuz-6.8.0-45-generic
notes_plat_sysinfo_1275=   root=/dev/mapper/ubuntu--vg-ubuntu--lv
notes_plat_sysinfo_1280=   ro
notes_plat_sysinfo_1285=   iommu=pt
notes_plat_sysinfo_1290=
notes_plat_sysinfo_1295= ------------------------------------------------------------
notes_plat_sysinfo_1300= 14. cpupower frequency-info
notes_plat_sysinfo_1305=   analyzing CPU 52:
notes_plat_sysinfo_1310=     current policy: frequency should be within 1.50 GHz and 3.55 GHz.
notes_plat_sysinfo_1315=                     The governor "schedutil" may decide which speed to use
notes_plat_sysinfo_1320=                     within this range.
notes_plat_sysinfo_1325=     boost state support:
notes_plat_sysinfo_1330=       Supported: yes
notes_plat_sysinfo_1335=       Active: yes
notes_plat_sysinfo_1340=       Boost States: 0
notes_plat_sysinfo_1345=       Total States: 3
notes_plat_sysinfo_1350=       Pstate-P0:  19800MHz
notes_plat_sysinfo_1355=
notes_plat_sysinfo_1360= ------------------------------------------------------------
notes_plat_sysinfo_1365= 15. sysctl
notes_plat_sysinfo_1370=   kernel.numa_balancing               1
notes_plat_sysinfo_1375=   kernel.randomize_va_space           0
notes_plat_sysinfo_1380=   vm.compaction_proactiveness        20
notes_plat_sysinfo_1385=   vm.dirty_background_bytes           0
notes_plat_sysinfo_1390=   vm.dirty_background_ratio          10
notes_plat_sysinfo_1395=   vm.dirty_bytes                      0
notes_plat_sysinfo_1400=   vm.dirty_expire_centisecs        3000
notes_plat_sysinfo_1405=   vm.dirty_ratio                      8
notes_plat_sysinfo_1410=   vm.dirty_writeback_centisecs      500
notes_plat_sysinfo_1415=   vm.dirtytime_expire_seconds     43200
notes_plat_sysinfo_1420=   vm.extfrag_threshold              500
notes_plat_sysinfo_1425=   vm.min_unmapped_ratio               1
notes_plat_sysinfo_1430=   vm.nr_hugepages                     0
notes_plat_sysinfo_1435=   vm.nr_hugepages_mempolicy           0
notes_plat_sysinfo_1440=   vm.nr_overcommit_hugepages          0
notes_plat_sysinfo_1445=   vm.swappiness                       1
notes_plat_sysinfo_1450=   vm.watermark_boost_factor       15000
notes_plat_sysinfo_1455=   vm.watermark_scale_factor          10
notes_plat_sysinfo_1460=   vm.zone_reclaim_mode                1
notes_plat_sysinfo_1465=
notes_plat_sysinfo_1470= ------------------------------------------------------------
notes_plat_sysinfo_1475= 16. /sys/kernel/mm/transparent_hugepage
notes_plat_sysinfo_1480=   defrag          [always] defer defer+madvise madvise never
notes_plat_sysinfo_1485=   enabled         [always] madvise never
notes_plat_sysinfo_1490=   hpage_pmd_size  2097152
notes_plat_sysinfo_1495=   shmem_enabled   always within_size advise [never] deny force
notes_plat_sysinfo_1500=
notes_plat_sysinfo_1505= ------------------------------------------------------------
notes_plat_sysinfo_1510= 17. /sys/kernel/mm/transparent_hugepage/khugepaged
notes_plat_sysinfo_1515=   alloc_sleep_millisecs   60000
notes_plat_sysinfo_1520=   defrag                      1
notes_plat_sysinfo_1525=   max_ptes_none             511
notes_plat_sysinfo_1530=   max_ptes_shared           256
notes_plat_sysinfo_1535=   max_ptes_swap              64
notes_plat_sysinfo_1540=   pages_to_scan            4096
notes_plat_sysinfo_1545=   scan_sleep_millisecs    10000
notes_plat_sysinfo_1550=
notes_plat_sysinfo_1555= ------------------------------------------------------------
notes_plat_sysinfo_1560= 18. OS release
notes_plat_sysinfo_1565=   From /etc/*-release /etc/*-version
notes_plat_sysinfo_1570=   os-release Ubuntu 24.04.1 LTS
notes_plat_sysinfo_1575=
notes_plat_sysinfo_1580= ------------------------------------------------------------
notes_plat_sysinfo_1585= 19. Disk information
notes_plat_sysinfo_1590= SPEC is set to: /home/cpu2017
notes_plat_sysinfo_1595=   Filesystem                        Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_1600=   /dev/mapper/ubuntu--vg-ubuntu--lv ext4   98G   21G   73G  22% /
notes_plat_sysinfo_1605=
notes_plat_sysinfo_1610= ------------------------------------------------------------
notes_plat_sysinfo_1615= 20. /sys/devices/virtual/dmi/id
notes_plat_sysinfo_1620=     Vendor:         H3C
notes_plat_sysinfo_1625=     Product:        R3950 G6
notes_plat_sysinfo_1630=     Product Family: Rack
notes_plat_sysinfo_1635=     Serial:         202311A3SFH20C000109
notes_plat_sysinfo_1640=
notes_plat_sysinfo_1645= ------------------------------------------------------------
notes_plat_sysinfo_1650= 21. dmidecode
notes_plat_sysinfo_1655=   Additional information from dmidecode 3.5 follows.  WARNING: Use caution when you interpret this section.
notes_plat_sysinfo_1660=   The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_1665=   determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
notes_plat_sysinfo_1670=   "DMTF SMBIOS" standard.
notes_plat_sysinfo_1675=   Memory:
notes_plat_sysinfo_1680=     4x Samsung M321R4GA3EB2-CCPEC 32 GB 2 rank 6400, configured at 6000
notes_plat_sysinfo_1685=     3x Samsung M321R4GA3EB2-CCPKC 32 GB 2 rank 6400, configured at 6000
notes_plat_sysinfo_1690=     1x Samsung M321R4GA3EB2-CCPPC 32 GB 2 rank 6400, configured at 6000
notes_plat_sysinfo_1695=     4x Samsung M321R4GA3EB2-CCPWC 32 GB 2 rank 6400, configured at 6000
notes_plat_sysinfo_1700=
notes_plat_sysinfo_1705=
notes_plat_sysinfo_1710= ------------------------------------------------------------
notes_plat_sysinfo_1715= 22. BIOS
notes_plat_sysinfo_1720= (This section combines info from /sys/devices and dmidecode.)
notes_plat_sysinfo_1725=    BIOS Vendor:       American Megatrends International, LLC.
notes_plat_sysinfo_1730=    BIOS Version:      7.30.04
notes_plat_sysinfo_1735=    BIOS Date:         12/10/2024
notes_plat_sysinfo_1740=    BIOS Revision:     5.35
notes_plat_sysinfo_1745=    Firmware Revision: 1.12
hw_cpu_name        = AMD EPYC 9355
hw_disk            = 98 GB  add more disk info here
hw_memory001       = 377.433 GB fixme: If using DDR4, the format is:
hw_memory002       = 'N GB (N x N GB nRxn PC4-nnnnX-X)'
hw_nchips          = 1
hw_ncores          = 32
hw_nthreadspercore = 2
prepared_by        = root  (is never output, only tags rawfile)
sw_file            = ext4
sw_os001           = Ubuntu 24.04.1 LTS
sw_os002           = 6.8.0-45-generic
sw_state           = Run level 5 (add definition here)
# End of settings added by sysinfo_program


557.xz_r:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


541.leela_r:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


531.deepsjeng_r:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


523.xalancbmk_r:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


520.omnetpp_r:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


500.perlbench_r:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
power_management000 = BIOS set to prefer performance at
power_management001 = the cost of additional power usage.
notes_plat_000 =BIOS settings:
notes_plat_005 =SMT Control set to Enabled
notes_plat_010 =SVM Mode set to Disabled
notes_plat_015 =Power Profile Selection set to High Performance Mode
notes_plat_020 =Determinism Slider set to Power
notes_plat_025 =cTDP set to 300
notes_plat_030 =PPT set to 300
notes_plat_035 =NUMA nodes per socket set to NPS 4
notes_plat_040 =ACPI SRAT L3 cache as NUMA domain set to Enabled