|
Supermicro Mainstream A+ Server AS -1015A-MT |
SPECrate®2017_int_base = 102 |
|
SPECrate®2017_int_peak = 109 |
| CPU2017 License: | 001176 | Test Date: | Jul-2024 |
|---|---|---|---|
| Test Sponsor: | Supermicro | Hardware Availability: | May-2024 |
| Tested by: | Supermicro | Software Availability: | Jun-2024 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | AMD EPYC 4344P |
| Max MHz: | 5300 |
| Nominal: | 3800 |
| Enabled: | 8 cores, 1 chip, 2 threads/core |
| Orderable: | 1 chip |
| Cache L1: | 32 KB I + 32 KB D on chip per core |
| L2: | 1 MB I+D on chip per core |
| L3: | 32 MB I+D on chip per chip |
| Other: | None |
| Memory: | 64 GB (2 x 32 GB 2Rx8 PC5-5200B-U) |
| Storage: | 1 x 500 GB NVMe SSD |
| Other: | CPU Cooling: Air |
| Software | |
|---|---|
| OS: | Ubuntu 22.04.3 LTS Kernel 6.5.0-44-generic |
| Compiler: | C/C++/Fortran: Version 4.0.0 of AOCC |
| Parallel: | No |
| Firmware: | Version 1.2a released Feb-2024 |
| File System: | ext4 |
| System State: | Run level 5 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 32/64-bit |
| Other: | None |
| Power Management: | OS set to prefer performance at the cost of additional power usage. |
| Power | |
|---|---|
| Max. Power (W): | 141.45 |
| Idle Power (W): | 40.35 |
| Min. Temperature (C): | 29.19 |
| Elevation (m): | 132 |
| Line Standard: | 220 V / 50 Hz / 1 phase / 3 wires |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | Version 01.01.04 of Supermicro BMC Firmware |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 500 W (non-redundant) |
| Details: | Supermicro PWS-505P-1H |
| Backplane: | 1 x 500 GB NVMe SSD back plane |
| Other Storage: | None |
| Storage Model #s: | Samsung SSD 980 Pro 500 GB |
| NICs Installed: | 2 x Intel I210 Gigabit Ethernet Controller @ 1 Gb |
| NICs Enabled (FW/OS): | 2 / 1 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | None |
| Power Analyzer | |
|---|---|
| Power Analyzer: | 10.216.139.174:8888 |
| Hardware Vendor: | YOKOGAWA, Inc. |
| Model: | WT310E |
| Serial Number: | C2ZG04129V |
| Input Connection: | Ethernet |
| Metrology Institute: | NIST |
| Calibration By: | TESCOM |
| Calibration Label: | T119755 |
| Calibration Date: | 16-May-2024 |
| PTDaemon® Version: | 1.11.0 (a4047d62; 2023-12-05) |
| Setup Description: | Connected to PSU 1 |
| Current Ranges Used: | 2A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | 10.216.139.174:8889 |
| Hardware Vendor: | iButtonLink, Inc. |
| Model: | LinkUSBi + T-Probe |
| Serial Number: | USB-SERIAL CH340 |
| Input Connection: | USB |
| PTDaemon Version: | 1.11.0 (a4047d62; 2023-12-05) |
| Setup Description: | 50 mm in front of SUT main intake |
Base Results Table
| Benchmark | Copies | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECrate®2017_int_base | 102 | ||||||||||||||||||
| SPECrate®2017_int_energy_base | 843 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 500.perlbench_r | 16 | 325 | 78.4 | 43.9 | 629 | 135 | 139 | 326 | 78.2 | 44.3 | 623 | 136 | 139 | 326 | 78.2 | 44.3 | 623 | 136 | 140 |
| 502.gcc_r | 16 | 308 | 73.6 | 39.5 | 623 | 128 | 140 | 312 | 72.5 | 40.0 | 615 | 128 | 141 | 313 | 72.4 | 40.0 | 614 | 128 | 141 |
| 505.mcf_r | 16 | 176 | 147 | 24.3 | 1160 | 138 | 141 | 175 | 148 | 24.2 | 1170 | 139 | 141 | 174 | 148 | 24.2 | 1170 | 138 | 141 |
| 520.omnetpp_r | 16 | 480 | 43.7 | 59.1 | 385 | 123 | 127 | 483 | 43.5 | 59.5 | 382 | 123 | 126 | 476 | 44.1 | 58.9 | 386 | 124 | 126 |
| 523.xalancbmk_r | 16 | 152 | 111 | 19.0 | 961 | 126 | 140 | 155 | 109 | 19.0 | 963 | 123 | 141 | 149 | 113 | 18.9 | 966 | 127 | 141 |
| 525.x264_r | 16 | 103 | 272 | 13.9 | 2180 | 135 | 138 | 103 | 272 | 13.8 | 2190 | 134 | 138 | 103 | 271 | 13.9 | 2190 | 134 | 137 |
| 531.deepsjeng_r | 16 | 197 | 92.9 | 26.6 | 750 | 135 | 137 | 197 | 92.9 | 26.6 | 749 | 135 | 137 | 197 | 93.1 | 26.5 | 751 | 135 | 137 |
| 541.leela_r | 16 | 290 | 91.3 | 38.5 | 745 | 133 | 135 | 290 | 91.3 | 38.5 | 745 | 133 | 135 | 291 | 90.9 | 38.5 | 745 | 132 | 134 |
| 548.exchange2_r | 16 | 158 | 265 | 21.0 | 2160 | 133 | 134 | 159 | 264 | 21.1 | 2150 | 133 | 134 | 159 | 264 | 21.2 | 2150 | 133 | 134 |
| 557.xz_r | 16 | 342 | 50.6 | 44.7 | 420 | 131 | 140 | 342 | 50.5 | 44.8 | 419 | 131 | 139 | 342 | 50.5 | 44.7 | 420 | 131 | 139 |
Peak Results Table
| Benchmark | Copies | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECrate®2017_int_peak | 109 | ||||||||||||||||||
| SPECrate®2017_int_energy_peak | 889 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 500.perlbench_r | 16 | 325 | 78.4 | 43.9 | 629 | 135 | 139 | 326 | 78.2 | 44.3 | 623 | 136 | 139 | 326 | 78.2 | 44.3 | 623 | 136 | 140 |
| 502.gcc_r | 16 | 231 | 98.1 | 31.2 | 788 | 135 | 141 | 233 | 97.2 | 31.4 | 783 | 135 | 141 | 233 | 97.4 | 31.4 | 784 | 135 | 141 |
| 505.mcf_r | 16 | 176 | 147 | 24.3 | 1160 | 138 | 141 | 175 | 148 | 24.2 | 1170 | 139 | 141 | 174 | 148 | 24.2 | 1170 | 138 | 141 |
| 520.omnetpp_r | 16 | 480 | 43.7 | 59.1 | 385 | 123 | 127 | 483 | 43.5 | 59.5 | 382 | 123 | 126 | 476 | 44.1 | 58.9 | 386 | 124 | 126 |
| 523.xalancbmk_r | 16 | 106 | 160 | 14.5 | 1260 | 137 | 140 | 105 | 161 | 14.4 | 1270 | 137 | 139 | 106 | 160 | 14.4 | 1270 | 136 | 139 |
| 525.x264_r | 16 | 103 | 272 | 13.9 | 2180 | 135 | 138 | 103 | 272 | 13.8 | 2190 | 134 | 138 | 103 | 271 | 13.9 | 2190 | 134 | 137 |
| 531.deepsjeng_r | 16 | 197 | 92.9 | 26.6 | 750 | 135 | 137 | 197 | 92.9 | 26.6 | 749 | 135 | 137 | 197 | 93.1 | 26.5 | 751 | 135 | 137 |
| 541.leela_r | 16 | 290 | 91.3 | 38.5 | 745 | 133 | 135 | 290 | 91.3 | 38.5 | 745 | 133 | 135 | 291 | 90.9 | 38.5 | 745 | 132 | 134 |
| 548.exchange2_r | 16 | 157 | 266 | 20.9 | 2170 | 133 | 134 | 158 | 266 | 20.9 | 2170 | 133 | 134 | 157 | 266 | 21.0 | 2170 | 133 | 134 |
| 557.xz_r | 16 | 342 | 50.6 | 44.7 | 420 | 131 | 140 | 342 | 50.5 | 44.8 | 419 | 131 | 139 | 342 | 50.5 | 44.7 | 420 | 131 | 139 |
Compiler Notes
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
Submit Notes
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
Operating System Notes
'ulimit -s unlimited' was used to set environment stack size limit 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. To free node-local memory and avoid remote memory usage, 'sysctl -w vm.zone_reclaim_mode=1' run as root. To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. To disable address space layout randomization (ASLR) to reduce run-to-run variability, 'sysctl -w kernel.randomize_va_space=0' run as root. To enable Transparent Hugepages (THP) only on request for base runs, 'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root. To enable THP for all allocations for peak runs, 'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and 'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
Environment Variables Notes
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
"/home/amd/eceo/speccpu2017/amd_rate_aocc400_znver4_A_lib/lib:/home/amd/eceo/speccpu2017/amd_rate_aocc
400_znver4_A_lib/lib32:"
MALLOC_CONF = "retain:true"
Environment variables set by runcpu during the 523.xalancbmk_r peak run:
MALLOC_CONF = "thp:never"
General Notes
Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented.
Platform Notes
Sysinfo program /home/amd/eceo/speccpu2017/bin/sysinfo
Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197
running on amd-Super-Server Mon Jul 29 23:57:25 2024
SUT (System Under Test) info as seen by some common utilities.
------------------------------------------------------------
Table of contents
------------------------------------------------------------
1. uname -a
2. w
3. Username
4. ulimit -a
5. sysinfo process ancestry
6. /proc/cpuinfo
7. lscpu
8. numactl --hardware
9. /proc/meminfo
10. who -r
11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.12)
12. Services, from systemctl list-unit-files
13. Linux kernel boot-time arguments, from /proc/cmdline
14. cpupower frequency-info
15. sysctl
16. /sys/kernel/mm/transparent_hugepage
17. /sys/kernel/mm/transparent_hugepage/khugepaged
18. OS release
19. Disk information
20. /sys/devices/virtual/dmi/id
21. dmidecode
22. BIOS
------------------------------------------------------------
------------------------------------------------------------
1. uname -a
Linux amd-Super-Server 6.5.0-44-generic #44~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Jun 18 14:36:16 UTC 2
x86_64 x86_64 x86_64 GNU/Linux
------------------------------------------------------------
2. w
23:57:25 up 4:16, 4 users, load average: 0.00, 0.05, 2.13
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
amd :1 :1 19:40 ?xdm? 4:00 0.00s /usr/libexec/gdm-x-session --run-script env
GNOME_SHELL_SESSION_MODE=ubuntu /usr/bin/gnome-session --session=ubuntu
amd pts/1 - 19:40 12.00s 0.92s 0.05s sudo su
amd pts/2 10.98.35.118 23:54 29.00s 0.01s 0.02s sshd: amd [priv]
amd pts/3 10.98.35.118 23:54 29.00s 0.00s 0.01s sudo su
------------------------------------------------------------
3. Username
From environment variable $USER: root
From the command 'logname': amd
------------------------------------------------------------
4. ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) unlimited
coredump(blocks) 0
memory(kbytes) unlimited
locked memory(kbytes) 2097152
process 253413
nofiles 1024
vmemory(kbytes) unlimited
locks unlimited
rtprio 0
------------------------------------------------------------
5. sysinfo process ancestry
/sbin/init splash
/lib/systemd/systemd --user
/usr/libexec/gnome-terminal-server
bash
sudo su
sudo su
su
bash
python3 ./run_amd_rate_aocc400_znver4_A1.py
/bin/bash ./amd_rate_aocc400_znver4_A1.sh
runcpu --config amd_rate_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 intrate
runcpu --configfile amd_rate_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --runmode rate
--tune base:peak --size test:train:refrate intrate --nopreenv --note-preenv --logfile
$SPEC/tmp/CPU2017.001/templogs/preenv.intrate.001.0.log --lognum 001.0 --from_runcpu 2
specperl $SPEC/bin/sysinfo
$SPEC = /home/amd/eceo/speccpu2017
------------------------------------------------------------
6. /proc/cpuinfo
model name : AMD EPYC 4344P 8-Core Processor
vendor_id : AuthenticAMD
cpu family : 25
model : 97
stepping : 2
microcode : 0xa601206
bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass srso
TLB size : 3584 4K pages
cpu cores : 8
siblings : 16
1 physical ids (chips)
16 processors (hardware threads)
physical id 0: core ids 0-7
physical id 0: apicids 0-15
Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
virtualized systems. Use the above data carefully.
------------------------------------------------------------
7. lscpu
From lscpu from util-linux 2.37.2:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 48 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
Model name: AMD EPYC 4344P 8-Core Processor
CPU family: 25
Model: 97
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
Stepping: 2
CPU max MHz: 5389.0000
CPU min MHz: 400.0000
BogoMIPS: 7585.55
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid extd_apicid
aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2
movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce
topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3
cdp_l3 hw_pstate ssbd mba perfmon_v2 ibrs ibpb stibp ibrs_enhanced
vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f
avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni
avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc
cqm_mbm_total cqm_mbm_local avx512_bf16 clzero irperf xsaveerptr rdpru
wbnoinvd cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean
flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload
vgif x2avic v_spec_ctrl vnmi avx512vbmi umip pku ospke avx512_vbmi2
gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq rdpid
overflow_recov succor smca flush_l1d
Virtualization: AMD-V
L1d cache: 256 KiB (8 instances)
L1i cache: 256 KiB (8 instances)
L2 cache: 8 MiB (8 instances)
L3 cache: 32 MiB (1 instance)
NUMA node(s): 1
NUMA node0 CPU(s): 0-15
Vulnerability Gather data sampling: Not affected
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Not affected
Vulnerability Mmio stale data: Not affected
Vulnerability Retbleed: Not affected
Vulnerability Spec rstack overflow: Mitigation; Safe RET
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP
always-on; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
From lscpu --cache:
NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE
L1d 32K 256K 8 Data 1 64 1 64
L1i 32K 256K 8 Instruction 1 64 1 64
L2 1M 8M 8 Unified 2 2048 1 64
L3 32M 32M 16 Unified 3 32768 1 64
------------------------------------------------------------
8. numactl --hardware
NOTE: a numactl 'node' might or might not correspond to a physical chip.
available: 1 nodes (0)
node 0 cpus: 0-15
node 0 size: 63428 MB
node 0 free: 61734 MB
node distances:
node 0
0: 10
------------------------------------------------------------
9. /proc/meminfo
MemTotal: 64950988 kB
------------------------------------------------------------
10. who -r
run-level 5 Jul 29 19:40
------------------------------------------------------------
11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.12)
Default Target Status
graphical running
------------------------------------------------------------
12. Services, from systemctl list-unit-files
STATE UNIT FILES
enabled ModemManager NetworkManager NetworkManager-dispatcher NetworkManager-wait-online
accounts-daemon anacron apparmor avahi-daemon binfmt-support bluetooth console-setup cron
cups cups-browsed dmesg e2scrub_reap getty@ gpu-manager grub-common grub-initrd-fallback
hv-fcopy-daemon hv-kvp-daemon hv-vss-daemon irqbalance kerneloops keyboard-setup
networkd-dispatcher nvmefc-boot-connections nvmf-autoconnect openvpn power-profiles-daemon
rsyslog secureboot-db setvtrgb snapd ssh switcheroo-control systemd-oomd systemd-pstore
systemd-resolved systemd-timesyncd thermald ua-reboot-cmds ubuntu-advantage udisks2 ufw
unattended-upgrades wpa_supplicant
enabled-runtime netplan-ovs-cleanup systemd-fsck-root systemd-remount-fs
disabled acpid brltty console-getty debug-shell intel-sgx-load-module nftables openvpn-client@
openvpn-server@ openvpn@ rsync rtkit-daemon serial-getty@ speech-dispatcherd
systemd-boot-check-no-failures systemd-network-generator systemd-networkd
systemd-networkd-wait-online systemd-sysext systemd-time-wait-sync upower
wpa_supplicant-nl80211@ wpa_supplicant-wired@ wpa_supplicant@
generated apport speech-dispatcher
indirect saned@ spice-vdagentd uuidd
masked alsa-utils cryptdisks cryptdisks-early hwclock pulseaudio-enable-autospawn rc rcS saned
screen-cleanup sudo x11-common
------------------------------------------------------------
13. Linux kernel boot-time arguments, from /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-6.5.0-44-generic
root=UUID=a6df9058-1d2e-4132-a213-1d96030e2b42
ro
quiet
splash
vt.handoff=7
------------------------------------------------------------
14. cpupower frequency-info
analyzing CPU 15:
current policy: frequency should be within 400 MHz and 5.39 GHz.
The governor "performance" may decide which speed to use
within this range.
boost state support:
Supported: yes
Active: yes
Boost States: 0
Total States: 2
Pstate-P0: 3800MHz
------------------------------------------------------------
15. sysctl
kernel.numa_balancing 0
kernel.randomize_va_space 0
vm.compaction_proactiveness 20
vm.dirty_background_bytes 0
vm.dirty_background_ratio 10
vm.dirty_bytes 0
vm.dirty_expire_centisecs 3000
vm.dirty_ratio 8
vm.dirty_writeback_centisecs 500
vm.dirtytime_expire_seconds 43200
vm.extfrag_threshold 500
vm.min_unmapped_ratio 1
vm.nr_hugepages 0
vm.nr_hugepages_mempolicy 0
vm.nr_overcommit_hugepages 0
vm.swappiness 1
vm.watermark_boost_factor 15000
vm.watermark_scale_factor 10
vm.zone_reclaim_mode 1
------------------------------------------------------------
16. /sys/kernel/mm/transparent_hugepage
defrag [always] defer defer+madvise madvise never
enabled [always] madvise never
hpage_pmd_size 2097152
shmem_enabled always within_size advise [never] deny force
------------------------------------------------------------
17. /sys/kernel/mm/transparent_hugepage/khugepaged
alloc_sleep_millisecs 60000
defrag 1
max_ptes_none 511
max_ptes_shared 256
max_ptes_swap 64
pages_to_scan 4096
scan_sleep_millisecs 10000
------------------------------------------------------------
18. OS release
From /etc/*-release /etc/*-version
os-release Ubuntu 22.04.3 LTS
------------------------------------------------------------
19. Disk information
SPEC is set to: /home/amd/eceo/speccpu2017
Filesystem Type Size Used Avail Use% Mounted on
/dev/nvme0n1p2 ext4 457G 33G 402G 8% /
------------------------------------------------------------
20. /sys/devices/virtual/dmi/id
Vendor: Supermicro
Product: Super Server
Product Family: Family
Serial: 0123456789
------------------------------------------------------------
21. dmidecode
Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section.
The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
"DMTF SMBIOS" standard.
Memory:
2x NO DIMM NO DIMM
2x Unknown CT32G52C42U5.M16G1 32 GB 2 rank 5200
------------------------------------------------------------
22. BIOS
(This section combines info from /sys/devices and dmidecode.)
BIOS Vendor: American Megatrends International, LLC.
BIOS Version: 1.2a
BIOS Date: 02/15/2024
BIOS Revision: 5.32
Compiler Version Notes
============================================================================================================
C | 502.gcc_r(peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C | 500.perlbench_r(base, peak) 502.gcc_r(base) 505.mcf_r(base, peak) 525.x264_r(base, peak)
| 557.xz_r(base, peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C | 502.gcc_r(peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C | 500.perlbench_r(base, peak) 502.gcc_r(base) 505.mcf_r(base, peak) 525.x264_r(base, peak)
| 557.xz_r(base, peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C++ | 523.xalancbmk_r(peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C++ | 520.omnetpp_r(base, peak) 523.xalancbmk_r(base) 531.deepsjeng_r(base, peak) 541.leela_r(base,
| peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C++ | 523.xalancbmk_r(peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C++ | 520.omnetpp_r(base, peak) 523.xalancbmk_r(base) 531.deepsjeng_r(base, peak) 541.leela_r(base,
| peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
Fortran | 548.exchange2_r(base, peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 14.0.6 (CLANG: AOCC_4.0.0-Build#434 2022_10_28) (based on LLVM Mirror.Version.14.0.6)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-4.0.0/bin
------------------------------------------------------------------------------------------------------------
Base Portability Flags
| 500.perlbench_r: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 502.gcc_r: | -DSPEC_LP64 |
| 505.mcf_r: | -DSPEC_LP64 |
| 520.omnetpp_r: | -DSPEC_LP64 |
| 523.xalancbmk_r: | -DSPEC_LINUX -DSPEC_LP64 |
| 525.x264_r: | -DSPEC_LP64 |
| 531.deepsjeng_r: | -DSPEC_LP64 |
| 541.leela_r: | -DSPEC_LP64 |
| 548.exchange2_r: | -DSPEC_LP64 |
| 557.xz_r: | -DSPEC_LP64 |
Base Optimization Flags
C benchmarks:
C++ benchmarks:
Fortran benchmarks:
Base Other Flags
C benchmarks:
| -Wno-unused-command-line-argument |
C++ benchmarks:
| -Wno-unused-command-line-argument |
Fortran benchmarks:
| -Wno-unused-command-line-argument |
Peak Portability Flags
| 500.perlbench_r: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 502.gcc_r: | -D_FILE_OFFSET_BITS=64 |
| 505.mcf_r: | -DSPEC_LP64 |
| 520.omnetpp_r: | -DSPEC_LP64 |
| 523.xalancbmk_r: | -DSPEC_LINUX -DSPEC_LP64 |
| 525.x264_r: | -DSPEC_LP64 |
| 531.deepsjeng_r: | -DSPEC_LP64 |
| 541.leela_r: | -DSPEC_LP64 |
| 548.exchange2_r: | -DSPEC_LP64 |
| 557.xz_r: | -DSPEC_LP64 |
Peak Optimization Flags
C benchmarks:
| 500.perlbench_r: | basepeak = yes |
| 502.gcc_r: | -m32 -flto -z muldefs -Ofast -march=znver4 -fveclib=AMDLIBM -ffast-math -fstruct-layout=7 -mllvm -unroll-threshold=50 -fremap-arrays -fstrip-mining -mllvm -inline-threshold=1000 -mllvm -reduce-array-computations=3 -zopt -fgnu89-inline -lamdalloc |
| 505.mcf_r: | basepeak = yes |
| 525.x264_r: | basepeak = yes |
| 557.xz_r: | basepeak = yes |
C++ benchmarks:
| 520.omnetpp_r: | basepeak = yes |
| 523.xalancbmk_r: | -m32 -flto -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 -Wl,-mllvm -Wl,-reduce-array-computations=3 -Wl,-mllvm -Wl,-do-block-reorder=aggressive -fno-loop-reroll -Ofast -march=znver4 -fveclib=AMDLIBM -ffast-math -finline-aggressive -mllvm -unroll-threshold=100 -mllvm -reduce-array-computations=3 -zopt -mllvm -do-block-reorder=aggressive -fvirtual-function-elimination -fvisibility=hidden -lamdalloc-ext |
| 531.deepsjeng_r: | basepeak = yes |
| 541.leela_r: | basepeak = yes |
Fortran benchmarks:
Peak Other Flags
C benchmarks (except as noted below):
| -Wno-unused-command-line-argument | |
| 502.gcc_r: | -L/usr/lib32 -Wno-unused-command-line-argument -L/home/work/cpu2017/v119/aocc4/znver4/rate/amd_rate_aocc400_znver4_A_lib/lib32 |
C++ benchmarks (except as noted below):
| -Wno-unused-command-line-argument | |
| 523.xalancbmk_r: | -L/usr/lib32 -Wno-unused-command-line-argument -L/home/work/cpu2017/v119/aocc4/znver4/rate/amd_rate_aocc400_znver4_A_lib/lib32 |
Fortran benchmarks:
| -Wno-unused-command-line-argument |