# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/bin/harness/runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 --nopower --runmode speed --tune base --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.8 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_genoa_B1.cfg # Creation Date : October 6, 2022 # CPU 2017 Version : 1.1.8 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD Genoa (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_genoa_B1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD Genoa-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Genoa microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_genoa_B1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # Genoa-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other Genoa configurations, please review # "Readme.amd_speed_aocc400_genoa_B1.txt". In general, Genoa CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_genoa_B1.cfg" or any # other file besides "ini_amd_speed_aocc400_genoa_B1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_genoa_B %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_genoa_B_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_genoa_B1.inc # File generation code date: October 11, 2022 # File generation date/time: May 01, 2023 / 17:46:36 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 256 %define physical_core_count 256 %define physical_core_max 255 %define logical_core_max 255 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9754' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 256 preENV_GOMP_CPU_AFFINITY = 0-255 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 654.roms_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0 128 1 129 2 130 3 131 4 132 5 133 6 134 7 135 8 136 9 137 10 138 11 139 12 140 13 141 14 142 15 143 16 144 17 145 18 146 19 147 20 148 21 149 22 150 23 151 24 152 25 153 26 154 27 155 28 156 29 157 30 158 31 159 32 160 33 161 34 162 35 163 36 164 37 165 38 166 39 167 40 168 41 169 42 170 43 171 44 172 45 173 46 174 47 175 48 176 49 177 50 178 51 179 52 180 53 181 54 182 55 183 56 184 57 185 58 186 59 187 60 188 61 189 62 190 63 191 64 192 65 193 66 194 67 195 68 196 69 197 70 198 71 199 72 200 73 201 74 202 75 203 76 204 77 205 78 206 79 207 80 208 81 209 82 210 83 211 84 212 85 213 86 214 87 215 88 216 89 217 90 218 91 219 92 220 93 221 94 222 95 223 96 224 97 225 98 226 99 227 100 228 101 229 102 230 103 231 104 232 105 233 106 234 107 235 108 236 109 237 110 238 111 239 112 240 113 241 114 242 115 243 116 244 117 245 118 246 119 247 120 248 121 249 122 250 123 251 124 252 125 253 126 254 127 255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9999 # (Your SPEC license number) tester =unknown tester test_sponsor =unknown sponsor hw_vendor =unknown vendor #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Nov-2022 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC 9754 hw_cpu_nominal_mhz =2250 hw_cpu_max_mhz =3100 hw_ncores =256 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 0.0.0 released Dec-2022 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 16 MB shared / 8 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =Not Applicable notes_os_thp_015 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 =To always enable THP for peak runs of: notes_os_thp_004 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_005 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_006 =run as root. notes_os_thp_007 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_008 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_009 =run as root. notes_os_thp_010 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_011 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_012 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =unknown hw_nchips =2 prepared_by =prepared by unknown sw_file =unknown file sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/amd_speed_aocc400_genoa_B1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. #teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref #teeout = yes #teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/amd_speed_aocc400_genoa_B1_flags.inc' # Dell Automation #include: Dell.inc # ----- Begin inclusion of 'Dell.inc' ############################################################################ #---------------------------- # Dell #--------------------------- # #------------------------------------------- # **** DO NOT EDIT BELOW HERE!!! #------------------------------------------- # Defined only if called from Automation %ifdef %{Dell-BIOS-inc} fprate,fpspeed,intrate,intspeed: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. # #include: Dell-flags.inc # ----- Begin inclusion of 'Dell-flags.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD - Dell platform flags #------------------------------------------------------- default: flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-AMD-EPYC-v1.1.xml # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-flags.inc' #include: %{Dell-BIOS-inc} # ----- Begin inclusion of 'Dell-BIOS_EPYC-4.inc' ############################################################################ #------------------------------------------------------- # Dell # # AMD EPYC 4 (Genoa) #------------------------------------------------------- # # BIOS Settings # - It is rare that these settings would need to be changed. # fprate,fpspeed,intrate,intspeed: notes_plat_form_000 = notes_plat_form_005 = BIOS settings: notes_plat_form_010 = DRAM Refresh Delay : Performance notes_plat_form_015 = DIMM Self Healing on notes_plat_form_020 = Uncorrectable Memory Error : Disabled %ifdef %{Dell-BIOS-LogProcD} notes_plat_form_025 = Logical Processor : Disabled %endif notes_plat_form_030 = Virtualization Technology : Disabled fprate: notes_plat_form_210 = L1 Stride Prefetcher: : Disabled fprate,intrate,intspeed: notes_plat_form_035 = NUMA Nodes per Socket : 4 fprate,fpspeed,intrate,intspeed: notes_plat_form_040 = L3 Cache as NUMA Domain : Enabled notes_plat_form_045 = notes_plat_form_050 = System Profile : Custom fpspeed,intspeed: notes_plat_form_055 = C-States : Disabled fprate,fpspeed,intrate,intspeed: notes_plat_form_060 = Memory Patrol Scrub : Disabled notes_plat_form_065 = PCI ASPM L1 Link notes_plat_form_070 = Power Management : Disabled notes_plat_form_075 = Determinism Slider : Power Determinism fpspeed,intspeed: notes_plat_form_080 = Algorithm Performance notes_plat_form_085 = Boost Disable (ApbDis) : Enabled # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-BIOS_EPYC-4.inc' #include: Dell-LIC.inc # ----- Begin inclusion of 'Dell-LIC.inc' ############################################################################ #------------------------------------------------------- # Dell (Dell Inc.) # # SPEC Licensing Info #------------------------------------------------------- fprate,fpspeed,intrate,intspeed: hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. prepared_by = Dell Inc. # Old number 55 license_num = 6573 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-LIC.inc' #include: Dell-cleanup.inc # ----- Begin inclusion of 'Dell-cleanup.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD #------------------------------------------------------- # cleanup - sysinfo/AMD scripts fprate,fpspeed,intspeed,intrate: #sw_os000 = %undef% #sw_os001 = %undef% sw_os002 = %undef% #hw_memory000 = %undef% hw_memory001 = %undef% hw_memory002 = %undef% #hw_model000 = %undef% #hw_model001 = %undef% # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-cleanup.inc' # #include: Dell-Autogen.inc # ----- Begin inclusion of 'Dell-Autogen.inc' ############################################################################ fprate,fpspeed,intrate,intspeed: hw_model = PowerEdge R6625 (AMD EPYC 9754 128-Core Processor) hw_cpu_name = AMD EPYC 9754 hw_ncpuorder = 1,2 chips hw_ncores = 256 hw_nthreadspercore = 1 fw_bios = Version 1.3.11 released Mar-2023 sw_state = Run level 3 (multi-user) sw_file = tmpfs hw_disk = 130 GB on tmpfs notes_tmpfs_000 = notes_tmpfs_005 = Benchmark run from a 130 GB ramdisk created with the cmd: "mount -t tmpfs -o size=130G tmpfs /mnt/ramdisk" sw_os000 = Ubuntu 22.04.1 LTS sw_os001 = 5.15.0-46-generic hw_cpu_nominal_mhz = 2250 hw_memory000 = 1536 GB (24 x 64 GB 2Rx4 PC5-4800B-R) sw_avail = Nov-2022 hw_avail = Jun-2023 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-Autogen.inc' %endif # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on genoa-sut Mon May 1 17:46:46 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.4) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -a notes_plat_sysinfo_185 = Linux genoa-sut 5.15.0-46-generic #49-Ubuntu SMP Thu Aug 4 18:03:25 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = ------------------------------------------------------------ notes_plat_sysinfo_200 = 2. w notes_plat_sysinfo_205 = 17:46:46 up 21 min, 1 user, load average: 0.33, 0.17, 0.37 notes_plat_sysinfo_210 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_215 = root tty1 - 17:45 38.00s 1.89s 0.39s /bin/bash ./amd_speed_aocc400_genoa_B1.sh notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = ------------------------------------------------------------ notes_plat_sysinfo_230 = 3. Username notes_plat_sysinfo_235 = From environment variable $USER: root notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = ------------------------------------------------------------ notes_plat_sysinfo_250 = 4. ulimit -a notes_plat_sysinfo_255 = time(seconds) unlimited notes_plat_sysinfo_260 = file(blocks) unlimited notes_plat_sysinfo_265 = data(kbytes) unlimited notes_plat_sysinfo_270 = stack(kbytes) unlimited notes_plat_sysinfo_275 = coredump(blocks) 0 notes_plat_sysinfo_280 = memory(kbytes) unlimited notes_plat_sysinfo_285 = locked memory(kbytes) 2097152 notes_plat_sysinfo_290 = process 6190229 notes_plat_sysinfo_295 = nofiles 1024 notes_plat_sysinfo_300 = vmemory(kbytes) unlimited notes_plat_sysinfo_305 = locks unlimited notes_plat_sysinfo_310 = rtprio 0 notes_plat_sysinfo_315 = notes_plat_sysinfo_320 = ------------------------------------------------------------ notes_plat_sysinfo_325 = 5. sysinfo process ancestry notes_plat_sysinfo_330 = /sbin/init notes_plat_sysinfo_335 = /bin/login -p -- notes_plat_sysinfo_340 = -bash notes_plat_sysinfo_345 = /bin/bash ./DELL_speed.sh notes_plat_sysinfo_350 = /bin/bash ./dell-run-main.sh speed notes_plat_sysinfo_355 = /bin/bash ./dell-run-main.sh speed notes_plat_sysinfo_360 = /bin/bash ./dell-run-specspeed.sh --output_format csv,html,pdf,txt -define notes_plat_sysinfo_365 = Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 notes_plat_sysinfo_370 = python3 ./run_amd_speed_aocc400_genoa_B1.py notes_plat_sysinfo_375 = /bin/bash ./amd_speed_aocc400_genoa_B1.sh notes_plat_sysinfo_380 = runcpu --config amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format notes_plat_sysinfo_385 = csv,html,pdf,txt -define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 intspeed notes_plat_sysinfo_390 = runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format notes_plat_sysinfo_395 = csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 --nopower notes_plat_sysinfo_400 = --runmode speed --tune base --size test:train:refspeed intspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_405 = $SPEC/tmp/CPU2017.001/templogs/preenv.intspeed.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_410 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_415 = $SPEC = /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = ------------------------------------------------------------ notes_plat_sysinfo_430 = 6. /proc/cpuinfo notes_plat_sysinfo_435 = model name : AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_440 = vendor_id : AuthenticAMD notes_plat_sysinfo_445 = cpu family : 25 notes_plat_sysinfo_450 = model : 160 notes_plat_sysinfo_455 = stepping : 2 notes_plat_sysinfo_460 = microcode : 0xaa00205 notes_plat_sysinfo_465 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_470 = TLB size : 3584 4K pages notes_plat_sysinfo_475 = cpu cores : 128 notes_plat_sysinfo_480 = siblings : 128 notes_plat_sysinfo_485 = 2 physical ids (chips) notes_plat_sysinfo_490 = 256 processors (hardware threads) notes_plat_sysinfo_495 = physical id 0: core ids notes_plat_sysinfo_500 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_505 = 240-247 notes_plat_sysinfo_510 = physical id 1: core ids notes_plat_sysinfo_515 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_520 = 240-247 notes_plat_sysinfo_525 = physical id 0: apicids notes_plat_sysinfo_530 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_535 = 240-247 notes_plat_sysinfo_540 = physical id 1: apicids notes_plat_sysinfo_545 = 256-263,272-279,288-295,304-311,320-327,336-343,352-359,368-375,384-391,400-407,416-423,432-439,448-455,4 notes_plat_sysinfo_550 = 64-471,480-487,496-503 notes_plat_sysinfo_555 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_560 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = ------------------------------------------------------------ notes_plat_sysinfo_575 = 7. lscpu notes_plat_sysinfo_580 = notes_plat_sysinfo_585 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_590 = Architecture: x86_64 notes_plat_sysinfo_595 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_600 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_605 = Byte Order: Little Endian notes_plat_sysinfo_610 = CPU(s): 256 notes_plat_sysinfo_615 = On-line CPU(s) list: 0-255 notes_plat_sysinfo_620 = Vendor ID: AuthenticAMD notes_plat_sysinfo_625 = Model name: AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_630 = CPU family: 25 notes_plat_sysinfo_635 = Model: 160 notes_plat_sysinfo_640 = Thread(s) per core: 1 notes_plat_sysinfo_645 = Core(s) per socket: 128 notes_plat_sysinfo_650 = Socket(s): 2 notes_plat_sysinfo_655 = Stepping: 2 notes_plat_sysinfo_660 = Frequency boost: enabled notes_plat_sysinfo_665 = CPU max MHz: 3101.0000 notes_plat_sysinfo_670 = CPU min MHz: 400.0000 notes_plat_sysinfo_675 = BogoMIPS: 4501.10 notes_plat_sysinfo_680 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_685 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_690 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_695 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_700 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_705 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_710 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_715 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_720 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_725 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_730 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_735 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt notes_plat_sysinfo_740 = lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_745 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_750 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_755 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_760 = Virtualization: AMD-V notes_plat_sysinfo_765 = L1d cache: 8 MiB (256 instances) notes_plat_sysinfo_770 = L1i cache: 8 MiB (256 instances) notes_plat_sysinfo_775 = L2 cache: 256 MiB (256 instances) notes_plat_sysinfo_780 = L3 cache: 512 MiB (32 instances) notes_plat_sysinfo_785 = NUMA node(s): 32 notes_plat_sysinfo_790 = NUMA node0 CPU(s): 0-7 notes_plat_sysinfo_795 = NUMA node1 CPU(s): 8-15 notes_plat_sysinfo_800 = NUMA node2 CPU(s): 64-71 notes_plat_sysinfo_805 = NUMA node3 CPU(s): 72-79 notes_plat_sysinfo_810 = NUMA node4 CPU(s): 32-39 notes_plat_sysinfo_815 = NUMA node5 CPU(s): 40-47 notes_plat_sysinfo_820 = NUMA node6 CPU(s): 96-103 notes_plat_sysinfo_825 = NUMA node7 CPU(s): 104-111 notes_plat_sysinfo_830 = NUMA node8 CPU(s): 48-55 notes_plat_sysinfo_835 = NUMA node9 CPU(s): 56-63 notes_plat_sysinfo_840 = NUMA node10 CPU(s): 112-119 notes_plat_sysinfo_845 = NUMA node11 CPU(s): 120-127 notes_plat_sysinfo_850 = NUMA node12 CPU(s): 16-23 notes_plat_sysinfo_855 = NUMA node13 CPU(s): 24-31 notes_plat_sysinfo_860 = NUMA node14 CPU(s): 80-87 notes_plat_sysinfo_865 = NUMA node15 CPU(s): 88-95 notes_plat_sysinfo_870 = NUMA node16 CPU(s): 128-135 notes_plat_sysinfo_875 = NUMA node17 CPU(s): 136-143 notes_plat_sysinfo_880 = NUMA node18 CPU(s): 192-199 notes_plat_sysinfo_885 = NUMA node19 CPU(s): 200-207 notes_plat_sysinfo_890 = NUMA node20 CPU(s): 160-167 notes_plat_sysinfo_895 = NUMA node21 CPU(s): 168-175 notes_plat_sysinfo_900 = NUMA node22 CPU(s): 224-231 notes_plat_sysinfo_905 = NUMA node23 CPU(s): 232-239 notes_plat_sysinfo_910 = NUMA node24 CPU(s): 176-183 notes_plat_sysinfo_915 = NUMA node25 CPU(s): 184-191 notes_plat_sysinfo_920 = NUMA node26 CPU(s): 240-247 notes_plat_sysinfo_925 = NUMA node27 CPU(s): 248-255 notes_plat_sysinfo_930 = NUMA node28 CPU(s): 144-151 notes_plat_sysinfo_935 = NUMA node29 CPU(s): 152-159 notes_plat_sysinfo_940 = NUMA node30 CPU(s): 208-215 notes_plat_sysinfo_945 = NUMA node31 CPU(s): 216-223 notes_plat_sysinfo_950 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_955 = Vulnerability L1tf: Not affected notes_plat_sysinfo_960 = Vulnerability Mds: Not affected notes_plat_sysinfo_965 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_970 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_975 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_980 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_985 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_990 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB notes_plat_sysinfo_995 = filling notes_plat_sysinfo_1000= Vulnerability Srbds: Not affected notes_plat_sysinfo_1005= Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_1010= notes_plat_sysinfo_1015= From lscpu --cache: notes_plat_sysinfo_1020= NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_1025= L1d 32K 8M 8 Data 1 64 1 64 notes_plat_sysinfo_1030= L1i 32K 8M 8 Instruction 1 64 1 64 notes_plat_sysinfo_1035= L2 1M 256M 8 Unified 2 2048 1 64 notes_plat_sysinfo_1040= L3 16M 512M 16 Unified 3 16384 1 64 notes_plat_sysinfo_1045= notes_plat_sysinfo_1050= ------------------------------------------------------------ notes_plat_sysinfo_1055= 8. numactl --hardware notes_plat_sysinfo_1060= NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_1065= available: 32 nodes (0-31) notes_plat_sysinfo_1070= node 0 cpus: 0-7 notes_plat_sysinfo_1075= node 0 size: 47928 MB notes_plat_sysinfo_1080= node 0 free: 47653 MB notes_plat_sysinfo_1085= node 1 cpus: 8-15 notes_plat_sysinfo_1090= node 1 size: 48381 MB notes_plat_sysinfo_1095= node 1 free: 48183 MB notes_plat_sysinfo_1100= node 2 cpus: 64-71 notes_plat_sysinfo_1105= node 2 size: 48381 MB notes_plat_sysinfo_1110= node 2 free: 48200 MB notes_plat_sysinfo_1115= node 3 cpus: 72-79 notes_plat_sysinfo_1120= node 3 size: 48379 MB notes_plat_sysinfo_1125= node 3 free: 48200 MB notes_plat_sysinfo_1130= node 4 cpus: 32-39 notes_plat_sysinfo_1135= node 4 size: 48381 MB notes_plat_sysinfo_1140= node 4 free: 48231 MB notes_plat_sysinfo_1145= node 5 cpus: 40-47 notes_plat_sysinfo_1150= node 5 size: 48381 MB notes_plat_sysinfo_1155= node 5 free: 48263 MB notes_plat_sysinfo_1160= node 6 cpus: 96-103 notes_plat_sysinfo_1165= node 6 size: 48381 MB notes_plat_sysinfo_1170= node 6 free: 48227 MB notes_plat_sysinfo_1175= node 7 cpus: 104-111 notes_plat_sysinfo_1180= node 7 size: 48379 MB notes_plat_sysinfo_1185= node 7 free: 48258 MB notes_plat_sysinfo_1190= node 8 cpus: 48-55 notes_plat_sysinfo_1195= node 8 size: 48381 MB notes_plat_sysinfo_1200= node 8 free: 48250 MB notes_plat_sysinfo_1205= node 9 cpus: 56-63 notes_plat_sysinfo_1210= node 9 size: 48381 MB notes_plat_sysinfo_1215= node 9 free: 48237 MB notes_plat_sysinfo_1220= node 10 cpus: 112-119 notes_plat_sysinfo_1225= node 10 size: 48381 MB notes_plat_sysinfo_1230= node 10 free: 48236 MB notes_plat_sysinfo_1235= node 11 cpus: 120-127 notes_plat_sysinfo_1240= node 11 size: 48379 MB notes_plat_sysinfo_1245= node 11 free: 48241 MB notes_plat_sysinfo_1250= node 12 cpus: 16-23 notes_plat_sysinfo_1255= node 12 size: 48381 MB notes_plat_sysinfo_1260= node 12 free: 48254 MB notes_plat_sysinfo_1265= node 13 cpus: 24-31 notes_plat_sysinfo_1270= node 13 size: 48381 MB notes_plat_sysinfo_1275= node 13 free: 48263 MB notes_plat_sysinfo_1280= node 14 cpus: 80-87 notes_plat_sysinfo_1285= node 14 size: 48381 MB notes_plat_sysinfo_1290= node 14 free: 48246 MB notes_plat_sysinfo_1295= node 15 cpus: 88-95 notes_plat_sysinfo_1300= node 15 size: 48363 MB notes_plat_sysinfo_1305= node 15 free: 48242 MB notes_plat_sysinfo_1310= node 16 cpus: 128-135 notes_plat_sysinfo_1315= node 16 size: 48381 MB notes_plat_sysinfo_1320= node 16 free: 48250 MB notes_plat_sysinfo_1325= node 17 cpus: 136-143 notes_plat_sysinfo_1330= node 17 size: 48381 MB notes_plat_sysinfo_1335= node 17 free: 48248 MB notes_plat_sysinfo_1340= node 18 cpus: 192-199 notes_plat_sysinfo_1345= node 18 size: 48381 MB notes_plat_sysinfo_1350= node 18 free: 48264 MB notes_plat_sysinfo_1355= node 19 cpus: 200-207 notes_plat_sysinfo_1360= node 19 size: 48379 MB notes_plat_sysinfo_1365= node 19 free: 48248 MB notes_plat_sysinfo_1370= node 20 cpus: 160-167 notes_plat_sysinfo_1375= node 20 size: 48381 MB notes_plat_sysinfo_1380= node 20 free: 48257 MB notes_plat_sysinfo_1385= node 21 cpus: 168-175 notes_plat_sysinfo_1390= node 21 size: 48381 MB notes_plat_sysinfo_1395= node 21 free: 48252 MB notes_plat_sysinfo_1400= node 22 cpus: 224-231 notes_plat_sysinfo_1405= node 22 size: 48381 MB notes_plat_sysinfo_1410= node 22 free: 48248 MB notes_plat_sysinfo_1415= node 23 cpus: 232-239 notes_plat_sysinfo_1420= node 23 size: 48344 MB notes_plat_sysinfo_1425= node 23 free: 48195 MB notes_plat_sysinfo_1430= node 24 cpus: 176-183 notes_plat_sysinfo_1435= node 24 size: 48381 MB notes_plat_sysinfo_1440= node 24 free: 48254 MB notes_plat_sysinfo_1445= node 25 cpus: 184-191 notes_plat_sysinfo_1450= node 25 size: 48381 MB notes_plat_sysinfo_1455= node 25 free: 48262 MB notes_plat_sysinfo_1460= node 26 cpus: 240-247 notes_plat_sysinfo_1465= node 26 size: 48381 MB notes_plat_sysinfo_1470= node 26 free: 48254 MB notes_plat_sysinfo_1475= node 27 cpus: 248-255 notes_plat_sysinfo_1480= node 27 size: 48379 MB notes_plat_sysinfo_1485= node 27 free: 48253 MB notes_plat_sysinfo_1490= node 28 cpus: 144-151 notes_plat_sysinfo_1495= node 28 size: 48381 MB notes_plat_sysinfo_1500= node 28 free: 44544 MB notes_plat_sysinfo_1505= node 29 cpus: 152-159 notes_plat_sysinfo_1510= node 29 size: 48381 MB notes_plat_sysinfo_1515= node 29 free: 48196 MB notes_plat_sysinfo_1520= node 30 cpus: 208-215 notes_plat_sysinfo_1525= node 30 size: 48381 MB notes_plat_sysinfo_1530= node 30 free: 48144 MB notes_plat_sysinfo_1535= node 31 cpus: 216-223 notes_plat_sysinfo_1540= node 31 size: 48347 MB notes_plat_sysinfo_1545= node 31 free: 48094 MB notes_plat_sysinfo_1550= node distances: notes_plat_sysinfo_1555= node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_1560= 25 26 27 28 29 30 31 notes_plat_sysinfo_1565= 0: 10 11 11 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1570= 32 32 32 32 32 32 32 notes_plat_sysinfo_1575= 1: 11 10 11 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1580= 32 32 32 32 32 32 32 notes_plat_sysinfo_1585= 2: 11 11 10 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1590= 32 32 32 32 32 32 32 notes_plat_sysinfo_1595= 3: 11 11 11 10 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1600= 32 32 32 32 32 32 32 notes_plat_sysinfo_1605= 4: 12 12 12 12 10 11 11 11 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1610= 32 32 32 32 32 32 32 notes_plat_sysinfo_1615= 5: 12 12 12 12 11 10 11 11 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1620= 32 32 32 32 32 32 32 notes_plat_sysinfo_1625= 6: 12 12 12 12 11 11 10 11 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1630= 32 32 32 32 32 32 32 notes_plat_sysinfo_1635= 7: 12 12 12 12 11 11 11 10 12 12 12 12 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1640= 32 32 32 32 32 32 32 notes_plat_sysinfo_1645= 8: 12 12 12 12 12 12 12 12 10 11 11 11 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1650= 32 32 32 32 32 32 32 notes_plat_sysinfo_1655= 9: 12 12 12 12 12 12 12 12 11 10 11 11 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1660= 32 32 32 32 32 32 32 notes_plat_sysinfo_1665= 10: 12 12 12 12 12 12 12 12 11 11 10 11 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1670= 32 32 32 32 32 32 32 notes_plat_sysinfo_1675= 11: 12 12 12 12 12 12 12 12 11 11 11 10 12 12 12 12 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1680= 32 32 32 32 32 32 32 notes_plat_sysinfo_1685= 12: 12 12 12 12 12 12 12 12 12 12 12 12 10 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1690= 32 32 32 32 32 32 32 notes_plat_sysinfo_1695= 13: 12 12 12 12 12 12 12 12 12 12 12 12 11 10 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1700= 32 32 32 32 32 32 32 notes_plat_sysinfo_1705= 14: 12 12 12 12 12 12 12 12 12 12 12 12 11 11 10 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1710= 32 32 32 32 32 32 32 notes_plat_sysinfo_1715= 15: 12 12 12 12 12 12 12 12 12 12 12 12 11 11 11 10 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1720= 32 32 32 32 32 32 32 notes_plat_sysinfo_1725= 16: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 12 12 12 12 12 notes_plat_sysinfo_1730= 12 12 12 12 12 12 12 notes_plat_sysinfo_1735= 17: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 12 12 12 12 12 notes_plat_sysinfo_1740= 12 12 12 12 12 12 12 notes_plat_sysinfo_1745= 18: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 12 12 12 12 12 notes_plat_sysinfo_1750= 12 12 12 12 12 12 12 notes_plat_sysinfo_1755= 19: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 12 12 12 12 12 notes_plat_sysinfo_1760= 12 12 12 12 12 12 12 notes_plat_sysinfo_1765= 20: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 10 11 11 11 12 notes_plat_sysinfo_1770= 12 12 12 12 12 12 12 notes_plat_sysinfo_1775= 21: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 11 10 11 11 12 notes_plat_sysinfo_1780= 12 12 12 12 12 12 12 notes_plat_sysinfo_1785= 22: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 11 11 10 11 12 notes_plat_sysinfo_1790= 12 12 12 12 12 12 12 notes_plat_sysinfo_1795= 23: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 11 11 11 10 12 notes_plat_sysinfo_1800= 12 12 12 12 12 12 12 notes_plat_sysinfo_1805= 24: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 10 notes_plat_sysinfo_1810= 11 11 11 12 12 12 12 notes_plat_sysinfo_1815= 25: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 11 notes_plat_sysinfo_1820= 10 11 11 12 12 12 12 notes_plat_sysinfo_1825= 26: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 11 notes_plat_sysinfo_1830= 11 10 11 12 12 12 12 notes_plat_sysinfo_1835= 27: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 11 notes_plat_sysinfo_1840= 11 11 10 12 12 12 12 notes_plat_sysinfo_1845= 28: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1850= 12 12 12 10 11 11 11 notes_plat_sysinfo_1855= 29: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1860= 12 12 12 11 10 11 11 notes_plat_sysinfo_1865= 30: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1870= 12 12 12 11 11 10 11 notes_plat_sysinfo_1875= 31: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1880= 12 12 12 11 11 11 10 notes_plat_sysinfo_1885= notes_plat_sysinfo_1890= ------------------------------------------------------------ notes_plat_sysinfo_1895= 9. /proc/meminfo notes_plat_sysinfo_1900= MemTotal: 1584812528 kB notes_plat_sysinfo_1905= notes_plat_sysinfo_1910= ------------------------------------------------------------ notes_plat_sysinfo_1915= 10. who -r notes_plat_sysinfo_1920= run-level 3 May 1 17:25 notes_plat_sysinfo_1925= notes_plat_sysinfo_1930= ------------------------------------------------------------ notes_plat_sysinfo_1935= 11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.4) notes_plat_sysinfo_1940= Default Target Status notes_plat_sysinfo_1945= multi-user running notes_plat_sysinfo_1950= notes_plat_sysinfo_1955= ------------------------------------------------------------ notes_plat_sysinfo_1960= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1965= STATE UNIT FILES notes_plat_sysinfo_1970= enabled ModemManager blk-availability cloud-config cloud-final cloud-init cloud-init-local notes_plat_sysinfo_1975= console-setup cron dmesg e2scrub_reap finalrd getty@ grub-common grub-initrd-fallback notes_plat_sysinfo_1980= irqbalance keyboard-setup lm-sensors lvm2-monitor lxd-agent networkd-dispatcher open-iscsi notes_plat_sysinfo_1985= open-vm-tools pollinate rsync rsyslog secureboot-db setvtrgb ssh systemd-networkd notes_plat_sysinfo_1990= systemd-networkd-wait-online systemd-pstore systemd-resolved systemd-timesyncd thermald notes_plat_sysinfo_1995= tuned ua-reboot-cmds ubuntu-advantage udisks2 vgauth notes_plat_sysinfo_2000= enabled-runtime netplan-ovs-cleanup rc-local systemd-remount-fs notes_plat_sysinfo_2005= disabled apparmor console-getty debug-shell iscsid multipathd nftables powertop serial-getty@ notes_plat_sysinfo_2010= smartmontools sysstat systemd-boot-check-no-failures systemd-network-generator notes_plat_sysinfo_2015= systemd-sysext systemd-time-wait-sync ufw upower notes_plat_sysinfo_2020= generated apport notes_plat_sysinfo_2025= indirect uuidd notes_plat_sysinfo_2030= masked accounts-daemon alsa-utils atd cryptdisks cryptdisks-early gpu-manager hwclock lvm2 notes_plat_sysinfo_2035= multipath-tools-boot rc rcS screen-cleanup sudo x11-common notes_plat_sysinfo_2040= notes_plat_sysinfo_2045= ------------------------------------------------------------ notes_plat_sysinfo_2050= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_2055= BOOT_IMAGE=/vmlinuz-5.15.0-46-generic notes_plat_sysinfo_2060= root=/dev/mapper/ubuntu--vg-ubuntu--lv notes_plat_sysinfo_2065= ro notes_plat_sysinfo_2070= notes_plat_sysinfo_2075= ------------------------------------------------------------ notes_plat_sysinfo_2080= 14. cpupower frequency-info notes_plat_sysinfo_2085= analyzing CPU 0: notes_plat_sysinfo_2090= current policy: frequency should be within 400 MHz and 3.10 GHz. notes_plat_sysinfo_2095= The governor "performance" may decide which speed to use notes_plat_sysinfo_2100= within this range. notes_plat_sysinfo_2105= boost state support: notes_plat_sysinfo_2110= Supported: yes notes_plat_sysinfo_2115= Active: yes notes_plat_sysinfo_2120= Boost States: 0 notes_plat_sysinfo_2125= Total States: 3 notes_plat_sysinfo_2130= Pstate-P0: 2250MHz notes_plat_sysinfo_2135= notes_plat_sysinfo_2140= ------------------------------------------------------------ notes_plat_sysinfo_2145= 15. tuned-adm active notes_plat_sysinfo_2150= Current active profile: latency-performance notes_plat_sysinfo_2155= notes_plat_sysinfo_2160= ------------------------------------------------------------ notes_plat_sysinfo_2165= 16. sysctl notes_plat_sysinfo_2170= kernel.numa_balancing 1 notes_plat_sysinfo_2175= kernel.randomize_va_space 0 notes_plat_sysinfo_2180= vm.compaction_proactiveness 20 notes_plat_sysinfo_2185= vm.dirty_background_bytes 0 notes_plat_sysinfo_2190= vm.dirty_background_ratio 3 notes_plat_sysinfo_2195= vm.dirty_bytes 0 notes_plat_sysinfo_2200= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_2205= vm.dirty_ratio 8 notes_plat_sysinfo_2210= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_2215= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_2220= vm.extfrag_threshold 500 notes_plat_sysinfo_2225= vm.min_unmapped_ratio 1 notes_plat_sysinfo_2230= vm.nr_hugepages 0 notes_plat_sysinfo_2235= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_2240= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_2245= vm.swappiness 1 notes_plat_sysinfo_2250= vm.watermark_boost_factor 15000 notes_plat_sysinfo_2255= vm.watermark_scale_factor 10 notes_plat_sysinfo_2260= vm.zone_reclaim_mode 1 notes_plat_sysinfo_2265= notes_plat_sysinfo_2270= ------------------------------------------------------------ notes_plat_sysinfo_2275= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_2280= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_2285= enabled [always] madvise never notes_plat_sysinfo_2290= hpage_pmd_size 2097152 notes_plat_sysinfo_2295= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_2300= notes_plat_sysinfo_2305= ------------------------------------------------------------ notes_plat_sysinfo_2310= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_2315= alloc_sleep_millisecs 60000 notes_plat_sysinfo_2320= defrag 1 notes_plat_sysinfo_2325= max_ptes_none 511 notes_plat_sysinfo_2330= max_ptes_shared 256 notes_plat_sysinfo_2335= max_ptes_swap 64 notes_plat_sysinfo_2340= pages_to_scan 4096 notes_plat_sysinfo_2345= scan_sleep_millisecs 10000 notes_plat_sysinfo_2350= notes_plat_sysinfo_2355= ------------------------------------------------------------ notes_plat_sysinfo_2360= 19. OS release notes_plat_sysinfo_2365= From /etc/*-release /etc/*-version notes_plat_sysinfo_2370= os-release Ubuntu 22.04.1 LTS notes_plat_sysinfo_2375= notes_plat_sysinfo_2380= ------------------------------------------------------------ notes_plat_sysinfo_2385= 20. Disk information notes_plat_sysinfo_2390= SPEC is set to: /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e notes_plat_sysinfo_2395= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_2400= tmpfs tmpfs 130G 3.5G 127G 3% /mnt/ramdisk notes_plat_sysinfo_2405= notes_plat_sysinfo_2410= ------------------------------------------------------------ notes_plat_sysinfo_2415= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_2420= Vendor: Dell Inc. notes_plat_sysinfo_2425= Product: PowerEdge R6625 notes_plat_sysinfo_2430= Product Family: PowerEdge notes_plat_sysinfo_2435= Serial: BGP4016 notes_plat_sysinfo_2440= notes_plat_sysinfo_2445= ------------------------------------------------------------ notes_plat_sysinfo_2450= 22. dmidecode notes_plat_sysinfo_2455= Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_2460= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_2465= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_2470= "DMTF SMBIOS" standard. notes_plat_sysinfo_2475= Memory: notes_plat_sysinfo_2480= 24x 802C0000802C MTC40F2046S1RC48BA1 64 GB 2 rank 4800 notes_plat_sysinfo_2485= notes_plat_sysinfo_2490= notes_plat_sysinfo_2495= ------------------------------------------------------------ notes_plat_sysinfo_2500= 23. BIOS notes_plat_sysinfo_2505= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_2510= BIOS Vendor: Dell Inc. notes_plat_sysinfo_2515= BIOS Version: 1.3.11 notes_plat_sysinfo_2520= BIOS Date: 03/31/2023 notes_plat_sysinfo_2525= BIOS Revision: 1.3 hw_cpu_name = AMD EPYC 9754 hw_disk = 130 GB add more disk info here hw_nchips = 2 hw_ncores = 256 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = Ubuntu 22.04.1 LTS sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program