Fujitsu PRIMERGY RX2540 M7, Intel Xeon Platinum 8490H, |
SPECspeed®2017_fp_base = 319 |
SPECspeed®2017_fp_peak = Not Run SPECspeed®2017_fp_energy_peak = Not Run |
CPU2017 License: | 19 | Test Date: | Jan-2023 |
---|---|---|---|
Test Sponsor: | Fujitsu | Hardware Availability: | Mar-2023 |
Tested by: | Fujitsu | Software Availability: | Jun-2022 |
Benchmark result graphs are available in the PDF report.
Hardware | |
---|---|
CPU Name: | Intel Xeon Platinum 8490H |
Max MHz: | 3500 |
Nominal: | 1900 |
Enabled: | 120 cores, 2 chips |
Orderable: | 1,2 chips |
Cache L1: | 32 KB I + 48 KB D on chip per core |
L2: | 2 MB I+D on chip per core |
L3: | 112.5 MB I+D on chip per chip |
Other: | None |
Memory: | 1 TB (16 x 64 GB 2Rx4 PC5-4800B-R) |
Storage: | 1 x SATA SSD, 1.92TB |
Other: | None |
Software | |
---|---|
OS: | SUSE Linux Enterprise Server 15 SP4 5.14.21-150400.22-default |
Compiler: | C/C++: Version 2022.1 of Intel oneAPI DPC++/C++ Compiler for Linux; Fortran: Version 2022.1 of Intel Fortran Compiler for Linux; |
Parallel: | Yes |
Firmware: | Fujitsu BIOS Version V1.0.0.0 R1.10.0 for D3983-A1x. Released Mar-2023 tested as V1.0.0.0 R0.22.1 for D3983-A1x Jan-2023 |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | Not Applicable |
Other: | jemalloc memory allocator V5.0.1 |
Power Management: | BIOS set to prefer performance at the cost of additional power usage |
Power | |
---|---|
Max. Power (W): | 1186.7 |
Idle Power (W): | 356.72 |
Min. Temperature (C): | 24.50 |
Elevation (m): | 11 |
Line Standard: | 200 V / 50 Hz / 1 phase / 2 wires |
Provisioning: | Line-powered |
Power Settings | |
---|---|
Management FW: | Version 2.00u for D3933-A1x of Fujitsu BMC Firmware |
Memory Mode: | Normal |
Power-Relevant Hardware | |
---|---|
Power Supply: | 1 x 2200 W (non-redundant) |
Details: | Standard power supply part of base unit S26113-E646-V50-1 |
Backplane: | 12 x 3.5inch HDD back plan |
Other Storage: | Embedded SATA Controller |
Storage Model #s: | S26361-F5776-E192 |
NICs Installed: | 1 x Intel I210-T1 @ 1 Gb |
NICs Enabled (FW/OS): | 1 / 1 |
NICs Connected/Speed: | 1 @ 1 Gb |
Other HW Model #s: | None |
Power Analyzer | |
---|---|
Power Analyzer: | 10.118.163.191:8888 |
Hardware Vendor: | Hioki |
Model: | Hioki PW3336:1-Channel |
Serial Number: | 170213562 |
Input Connection: | USB via USB-Serial CH340 |
Metrology Institute: | NICT |
Calibration By: | HIOKI E.E. CORPORATION |
Calibration Label: | H06400088 |
Calibration Date: | 28-Jun-2022 |
PTDaemon® Version: | 1.9.2 (3976349f; 2020-12-08) |
Setup Description: | Connected to PSU 1 |
Current Ranges Used: | 10A |
Voltage Range Used: | 300V |
Temperature Meter | |
---|---|
Temperature Meter: | 10.118.163.191:8889 |
Hardware Vendor: | Digi International Inc. |
Model: | DigiWATCHPORT_H |
Serial Number: | W 640 45112 |
Input Connection: | USB |
PTDaemon Version: | 1.9.2 (3976349f; 2020-12-08) |
Setup Description: | 5 mm in front of SUT main air intake |
Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPECspeed®2017_fp_base | 319 | ||||||||||||||||||
SPECspeed®2017_fp_energy_base | 406 | ||||||||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
603.bwaves_s | 120 | 53.2 | 1110 | 57.4 | 1120 | 1080 | 1130 | 52.8 | 1120 | 57.2 | 1130 | 1080 | 1130 | 52.9 | 1110 | 56.9 | 1130 | 1070 | 1130 |
607.cactuBSSN_s | 120 | 43.0 | 388 | 38.2 | 477 | 889 | 965 | 42.4 | 393 | 38.0 | 480 | 895 | 969 | 41.8 | 399 | 38.0 | 480 | 909 | 1130 |
619.lbm_s | 120 | 19.8 | 264 | 18.9 | 315 | 953 | 1090 | 19.2 | 273 | 18.3 | 325 | 954 | 1110 | 19.1 | 274 | 17.8 | 334 | 932 | 1100 |
621.wrf_s | 120 | 84.6 | 156 | 63.6 | 227 | 751 | 768 | 84.4 | 157 | 63.7 | 227 | 755 | 769 | 84.4 | 157 | 63.7 | 227 | 754 | 769 |
627.cam4_s | 120 | 45.7 | 194 | 42.7 | 226 | 933 | 985 | 45.5 | 195 | 42.8 | 225 | 941 | 989 | 45.6 | 194 | 42.6 | 227 | 933 | 988 |
628.pop2_s | 120 | 170 | 69.7 | 128 | 102 | 750 | 975 | 169 | 70.1 | 127 | 102 | 752 | 928 | 171 | 69.6 | 128 | 102 | 751 | 979 |
638.imagick_s | 120 | 22.3 | 648 | 13.4 | 1180 | 601 | 1170 | 22.6 | 639 | 13.8 | 1140 | 611 | 1160 | 22.4 | 645 | 13.7 | 1150 | 610 | 1150 |
644.nab_s | 120 | 23.8 | 733 | 20.3 | 937 | 851 | 936 | 23.8 | 733 | 20.3 | 938 | 850 | 937 | 23.8 | 733 | 20.3 | 938 | 850 | 935 |
649.fotonik3d_s | 120 | 52.6 | 173 | 44.9 | 228 | 855 | 1100 | 53.6 | 170 | 46.1 | 222 | 859 | 1090 | 52.2 | 174 | 44.6 | 229 | 854 | 1100 |
654.roms_s | 120 | 30.2 | 521 | 33.5 | 526 | 1110 | 1190 | 30.3 | 520 | 33.3 | 529 | 1100 | 1180 | 30.4 | 518 | 33.6 | 524 | 1100 | 1180 |
Stack size set to unlimited using "ulimit -s unlimited"
Environment variables set by runcpu before the start of the run: KMP_AFFINITY = "granularity=fine,compact" LD_LIBRARY_PATH = "/home/Benchmark/speccpu-1.1.8/lib/intel64:/home/Benchmark/speccpu-1.1.8 /je5.0.1-64" MALLOC_CONF = "retain:true" OMP_STACKSIZE = "192M"
Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM memory using Redhat Enterprise Linux 8.0 Transparent Huge Pages enabled by default Prior to runcpu invocation Filesystem page cache synced and cleared with: sync; echo 3> /proc/sys/vm/drop_caches NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. jemalloc, a general purpose malloc implementation built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases
BIOS configuration: Hyper Threading = Disabled DCU IP Prefetcher = Disabled Package C State limit = C0 LLC Prefetch = Enabled DBP-F = Enabled CPU Performance Boost = Aggressive FAN Control = Full Optimized Power Mode = Enable Sysinfo program /home/Benchmark/speccpu-1.1.8/bin/sysinfo Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d running on localhost Sat Jan 14 11:07:34 2023 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) Platinum 8490H 2 "physical id"s (chips) 120 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 60 siblings : 60 physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 From lscpu from util-linux 2.37.2: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 46 bits physical, 57 bits virtual Byte Order: Little Endian CPU(s): 120 On-line CPU(s) list: 0-119 Vendor ID: GenuineIntel Model name: Intel(R) Xeon(R) Platinum 8490H CPU family: 6 Model: 143 Thread(s) per core: 1 Core(s) per socket: 60 Socket(s): 2 Stepping: 8 CPU max MHz: 3500.0000 CPU min MHz: 800.0000 BogoMIPS: 3800.00 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cat_l2 cdp_l3 invpcid_single intel_ppin cdp_l2 ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local split_lock_detect avx_vnni avx512_bf16 wbnoinvd dtherm ida arat pln pts hwp hwp_act_window hwp_epp hwp_pkg_req avx512vbmi umip pku ospke waitpkg avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme avx512_vpopcntdq la57 rdpid bus_lock_detect cldemote movdiri movdir64b enqcmd fsrm md_clear serialize tsxldtrk pconfig arch_lbr avx512_fp16 amx_tile flush_l1d arch_capabilities Virtualization: VT-x L1d cache: 5.6 MiB (120 instances) L1i cache: 3.8 MiB (120 instances) L2 cache: 240 MiB (120 instances) L3 cache: 225 MiB (2 instances) NUMA node(s): 2 NUMA node0 CPU(s): 0-59 NUMA node1 CPU(s): 60-119 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Enhanced IBRS, IBPB conditional, RSB filling Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected From lscpu --cache: NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE L1d 48K 5.6M 12 Data 1 64 1 64 L1i 32K 3.8M 8 Instruction 1 64 1 64 L2 2M 240M 16 Unified 2 2048 1 64 L3 112.5M 225M 15 Unified 3 122880 1 64 /proc/cpuinfo cache data cache size : 115200 KB From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 node 0 size: 515661 MB node 0 free: 514145 MB node 1 cpus: 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 node 1 size: 515695 MB node 1 free: 514840 MB node distances: node 0 1 0: 10 21 1: 21 10 From /proc/meminfo MemTotal: 1056109444 kB HugePages_Total: 0 Hugepagesize: 2048 kB /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has powersave From /etc/*release* /etc/*version* os-release: NAME="SLES" VERSION="15-SP4" VERSION_ID="15.4" PRETTY_NAME="SUSE Linux Enterprise Server 15 SP4" ID="sles" ID_LIKE="suse" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:suse:sles:15:sp4" uname -a: Linux localhost 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222/lp) x86_64 x86_64 x86_64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-12207 (iTLB Multihit): Not affected CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl and seccomp CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs barriers and __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB: conditional, RSB filling CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected CVE-2019-11135 (TSX Asynchronous Abort): Not affected run-level 3 Jan 14 11:07 SPEC is set to: /home/Benchmark/speccpu-1.1.8 Filesystem Type Size Used Avail Use% Mounted on /dev/sda2 xfs 1.8T 76G 1.7T 5% / From /sys/devices/virtual/dmi/id Vendor: FUJITSU Product: PRIMERGY RX2540 M7 Product Family: SERVER Serial: EWCExxxxxx Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 10x Samsung M321R8GA0BB0-CQKDG 64 GB 2 rank 4800 6x Samsung M321R8GA0BB0-CQKVG 64 GB 2 rank 4800 BIOS: BIOS Vendor: FUJITSU BIOS Version: V1.0.0.0 R0.22.1 for D3983-A1x BIOS Date: 12/01/2022 BIOS Revision: 0.22 Firmware Revision: 2.0 (End of data from sysinfo program)
============================================================================== C | 619.lbm_s(base) 638.imagick_s(base) 644.nab_s(base) ------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== C++, C, Fortran | 607.cactuBSSN_s(base) ------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== Fortran | 603.bwaves_s(base) 649.fotonik3d_s(base) 654.roms_s(base) ------------------------------------------------------------------------------ Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== Fortran, C | 621.wrf_s(base) 627.cam4_s(base) 628.pop2_s(base) ------------------------------------------------------------------------------ Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------
icx |
ifx |
ifx icx |
icpx icx ifx |
603.bwaves_s: | -DSPEC_LP64 |
607.cactuBSSN_s: | -DSPEC_LP64 |
619.lbm_s: | -DSPEC_LP64 |
621.wrf_s: | -DSPEC_LP64 -DSPEC_CASE_FLAG -convert big_endian |
627.cam4_s: | -DSPEC_LP64 -DSPEC_CASE_FLAG |
628.pop2_s: | -DSPEC_LP64 -DSPEC_CASE_FLAG -convert big_endian -assume byterecl |
638.imagick_s: | -DSPEC_LP64 |
644.nab_s: | -DSPEC_LP64 |
649.fotonik3d_s: | -DSPEC_LP64 |
654.roms_s: | -DSPEC_LP64 |
-m64 -g -std=c11 -Wl,-z,muldefs -xCORE-AVX2 -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops -qopt-mem-layout-trans=4 -fiopenmp -DSPEC_OPENMP -L/usr/local/jemalloc64-5.0.1/lib -ljemalloc |