SPEC CPU®2017 Floating Point Speed Result

Copyright 2017-2021 Standard Performance Evaluation Corporation

Lenovo Global Technology

ThinkSystem SR655
2.00 GHz, AMD EPYC 7713P

SPECspeed®2017_fp_base = 12500

SPECspeed®2017_fp_energy_base = 74900

SPECspeed®2017_fp_peak = 12800

SPECspeed®2017_fp_energy_peak = 76200
CPU2017 License: 9017 Test Date: May-2021
Test Sponsor: Lenovo Global Technology Hardware Availability: Jun-2021
Tested by: Lenovo Global Technology Software Availability: Mar-2021

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: AMD EPYC 7713P
  Max MHz: 3675
  Nominal: 2000
Enabled: 64 cores, 1 chip, 2 threads/core
Orderable: 1 chip
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 512 KB I+D on chip per core
  L3: 256 MB I+D on chip per chip,
32 MB shared / 8 cores
  Other: None
Memory: 256 GB (8 x 32 GB 2Rx8 PC4-3200AA-R, running at
2933)
Storage: 1 x 960 GB SATA SSD
Other: None
Software
OS: SUSE Linux Enterprise Server 15 SP2 (x86_64)
Kernel 5.3.18-22-default
Compiler: C/C++/Fortran: Version 3.0.0 of AOCC
Parallel: Yes
Firmware: Lenovo BIOS Version CFE125S 6.0 released May-2021
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc: jemalloc memory allocator library v5.1.0
Power Management: BIOS and OS set to balance power and performance
Power
Max. Power (W): 224.7
Idle Power (W): 94.06
Min. Temperature (C): 23.31
Elevation (m): 43
Line Standard: 220 V / 50 Hz / 1 phase / 3 wires
Provisioning: Line-powered
Power Settings
Management FW: Version 4.11 of AMBT23L
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 750 W (non-redundant)
  Details: ThinkSystem 750W Titanium Power Supply
7N67A00884
Backplane: 8 x 2.5-inch HDD back plane
Other Storage: None
Storage Model #s: 4XB7A10239
NICs Installed: 1 x ThinkSystem Ethernet 4-port Adaptor @ 1 Gb
NICs Enabled (FW/OS): 4 / 1
NICs Connected/Speed: 1 @ 1 Gb
Other HW Model #s: 6 x High Performance fans
Power Analyzer
Power Analyzer: WIN:9888
Hardware Vendor: YOKOGAWA, Inc.
Model: YokogawaWT310E
Serial Number: C3UD17023E
Input Connection: Default
Metrology Institute: CNAS
Calibration By: GUANG ZHOU GRG METROLOGY & TEST CO.,LTD.
Calibration Label: J202009040176A-0001
Calibration Date: 25-Sep-2020
PTDaemon® Version: 1.9.2 (3976349f; 2020-12-08)
Setup Description: Connected to PSU1
Current Ranges Used: 1A
Voltage Range Used: 300V
Temperature Meter
Temperature Meter: WIN:9889
Hardware Vendor: Digi International, Inc.
Model: DigiWATCHPORT_H
Serial Number: W62330940
Input Connection: USB
PTDaemon Version: 1.9.2 (3976349f; 2020-12-08)
Setup Description: 50 mm in front of SUT main intake

Base Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power
SPECspeed®2017_fp_base 12500
SPECspeed®2017_fp_energy_base 74900
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
603.bwaves_s 64 1710 3450 35.4 1820 207 212 1710 3450 35.6 1810 208 212 1710 3450 35.6 1810 208 213
607.cactuBSSN_s 64 87.3 1910 16.4 1110 188 202 87.3 1910 16.4 1110 188 202 87.9 1900 16.5 1110 187 201
619.lbm_s 64 88.2 59.4 17.1 348 194 210 88.0 59.5 17.1 349 194 211 88.2 59.4 17.1 349 193 211
621.wrf_s 64 1030 1290 16.8 858 164 166 1030 1290 16.9 855 164 166 1050 1260 17.1 843 163 165
627.cam4_s 64 98.4 90.1 18.9 510 192 225 97.4 91.0 18.8 513 193 224 97.7 90.7 18.8 512 193 224
628.pop2_s 64 2270 52.3 35.1 372 155 159 2270 52.4 35.1 372 155 160 2260 52.6 35.0 373 155 159
638.imagick_s 64 79.6 1810 13.9 1130 175 200 78.6 1830 13.8 1140 176 200 78.8 1830 13.8 1140 176 200
644.nab_s 64 70.9 2460 12.1 1570 170 180 70.9 2470 12.1 1570 170 179 70.9 2460 12.1 1570 171 179
649.fotonik3d_s 64 1550 59.0 27.9 367 181 195 1470 62.0 26.8 382 182 198 1570 58.2 28.2 363 180 195
654.roms_s 64 1110 1420 23.8 740 214 219 1120 1410 23.8 738 214 219 1110 1420 23.7 744 214 219

Peak Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power		 Seconds Ratio Energy
(kJ)		 Energy
Ratio		 Average
Power		 Maximum
Power
SPECspeed®2017_fp_peak 12800
SPECspeed®2017_fp_energy_peak 76200
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
603.bwaves_s 64 1710 3450 35.4 1820 207 212 1710 3450 35.6 1810 208 212 1710 3450 35.6 1810 208 213
607.cactuBSSN_s 64 87.2 1910 16.4 1110 188 202 86.5 1930 16.3 1120 189 203 87.1 1910 16.4 1110 188 203
619.lbm_s 64 85.3 61.4 16.3 364 192 209 85.0 61.6 16.4 363 193 210 93.2 56.2 17.7 336 190 209
621.wrf_s 64 1030 1290 16.8 858 164 166 1030 1290 16.9 855 164 166 1050 1260 17.1 843 163 165
627.cam4_s 64 97.3 91.1 18.7 515 193 224 97.9 90.5 18.8 512 192 222 97.6 90.8 18.9 512 193 224
628.pop2_s 64 2270 52.3 35.1 372 155 159 2270 52.4 35.1 372 155 160 2260 52.6 35.0 373 155 159
638.imagick_s 64 79.6 1810 13.9 1130 175 200 78.6 1830 13.8 1140 176 200 78.8 1830 13.8 1140 176 200
644.nab_s 128 61.8 2830 11.5 1650 186 197 61.6 2840 11.5 1660 186 198 61.7 2830 11.5 1650 186 197
649.fotonik3d_s 64 1550 59.0 27.9 367 181 195 1470 62.0 26.8 382 182 198 1570 58.2 28.2 363 180 195
654.roms_s 64 1010 1560 21.7 811 215 220 1010 1560 21.8 809 215 222 1010 1560 21.7 810 215 221

Compiler Notes

The AMD64 AOCC Compiler Suite is available at
http://developer.amd.com/amd-aocc/

Submit Notes

The config file option 'submit' was used.
'numactl' was used to bind copies to the cores.
See the configuration file for details.

Operating System Notes

'ulimit -s unlimited' was used to set environment stack size
'ulimit -l 2097152' was used to set environment locked pages in memory limit

runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>

'echo 8 > /proc/sys/vm/dirty_ratio' run as root to limit dirty cache to 8% of
memory.
'echo 1 > /proc/sys/vm/swappiness' run as root to limit swap usage to minimum
necessary.
'echo 1 > /proc/sys/vm/zone_reclaim_mode' run as root to free node-local memory
and avoid remote memory usage.
'sync; echo 3 > /proc/sys/vm/drop_caches' run as root to reset filesystem caches.
'sysctl -w kernel.randomize_va_space=0' run as root to disable address space layout
randomization (ASLR) to reduce run-to-run variability.

To enable Transparent Hugepages (THP) for all allocations,
'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and
'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
To enable THP only on request for peak runs of 628.pop2_s, and 638.imagick_s,
'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root.
To disable THP for peak runs of 627.cam4_s, 644.nab_s, 649.fotonik3d_s, and 654.roms_s,
'echo never > /sys/kernel/mm/transparent_hugepage/enabled' run as root.

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
GOMP_CPU_AFFINITY = "0-127"
LD_LIBRARY_PATH =
     "/home/cpu2017-1.1.7-amd-aocc300-milan-B1/amd_speed_aocc300_milan_B_lib/
     64;/home/cpu2017-1.1.7-amd-aocc300-milan-B1/amd_speed_aocc300_milan_B_li
     b/32:"
MALLOC_CONF = "retain:true"
OMP_DYNAMIC = "false"
OMP_SCHEDULE = "static"
OMP_STACKSIZE = "128M"
OMP_THREAD_LIMIT = "128"

Environment variables set by runcpu during the 607.cactuBSSN_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 619.lbm_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 627.cam4_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 644.nab_s peak run:
GOMP_CPU_AFFINITY = "0 64 1 65 2 66 3 67 4 68 5 69 6 70 7 71 8 72 9 73 10 74
     11 75 12 76 13 77 14 78 15 79 16 80 17 81 18 82 19 83 20 84 21 85 22 86
     23 87 24 88 25 89 26 90 27 91 28 92 29 93 30 94 31 95 32 96 33 97 34 98
     35 99 36 100 37 101 38 102 39 103 40 104 41 105 42 106 43 107 44 108 45
     109 46 110 47 111 48 112 49 113 50 114 51 115 52 116 53 117 54 118 55
     119 56 120 57 121 58 122 59 123 60 124 61 125 62 126 63 127"

Environment variables set by runcpu during the 654.roms_s peak run:
GOMP_CPU_AFFINITY = "0-63"

General Notes

Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using openSUSE 15.2

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.

jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified)
jemalloc 5.1.0 is available here:
https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2

Platform Notes

 BIOS settings:
 Core Performance Boost set to Disabled
 NUMA nodes per socket set to NPS2

 Sysinfo program /home/cpu2017-1.1.7-amd-aocc300-milan-B1/bin/sysinfo
 Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c
 running on localhost Sat Apr 18 08:50:53 2020

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : AMD EPYC 7713P 64-Core Processor
       1  "physical id"s (chips)
       128 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 64
       siblings  : 128
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
       53 54 55 56 57 58 59 60 61 62 63

 From lscpu:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      Address sizes:       48 bits physical, 48 bits virtual
      CPU(s):              128
      On-line CPU(s) list: 0-127
      Thread(s) per core:  2
      Core(s) per socket:  64
      Socket(s):           1
      NUMA node(s):        2
      Vendor ID:           AuthenticAMD
      CPU family:          25
      Model:               1
      Model name:          AMD EPYC 7713P 64-Core Processor
      Stepping:            1
      CPU MHz:             1795.964
      CPU max MHz:         2000.0000
      CPU min MHz:         1500.0000
      BogoMIPS:            3992.18
      Virtualization:      AMD-V
      L1d cache:           32K
      L1i cache:           32K
      L2 cache:            512K
      L3 cache:            32768K
      NUMA node0 CPU(s):   0-31,64-95
      NUMA node1 CPU(s):   32-63,96-127
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
      constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq
      monitor ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand
      lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw
      ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb
      cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase
      bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a rdseed adx smap clflushopt clwb sha_ni
      xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local
      clzero irperf xsaveerptr wbnoinvd arat npt lbrv svm_lock nrip_save tsc_scale
      vmcb_clean flushbyasid decodeassists pausefilter pfthreshold v_vmsave_vmload vgif
      umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca

 /proc/cpuinfo cache data
    cache size : 512 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 2 nodes (0-1)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
   28 29 30 31 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
   89 90 91 92 93 94 95
   node 0 size: 128821 MB
   node 0 free: 128131 MB
   node 1 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
   57 58 59 60 61 62 63 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112
   113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
   node 1 size: 128960 MB
   node 1 free: 128123 MB
   node distances:
   node   0   1
     0:  10  12
     1:  12  10

 From /proc/meminfo
    MemTotal:       263968528 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
    performance

 /usr/bin/lsb_release -d
    SUSE Linux Enterprise Server 15 SP2

 From /etc/*release* /etc/*version*
    os-release:
       NAME="SLES"
       VERSION="15-SP2"
       VERSION_ID="15.2"
       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP2"
       ID="sles"
       ID_LIKE="suse"
       ANSI_COLOR="0;32"
       CPE_NAME="cpe:/o:suse:sles:15:sp2"

 uname -a:
    Linux localhost 5.3.18-22-default #1 SMP Wed Jun 3 12:16:43 UTC 2020 (720aeba) x86_64
    x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Full AMD retpoline,
                                                        IBPB: conditional, IBRS_FW, STIBP:
                                                        always-on, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 3 Apr 17 21:13

 SPEC is set to: /home/cpu2017-1.1.7-amd-aocc300-milan-B1
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/md126p3   xfs   892G   34G  858G   4% /

 From /sys/devices/virtual/dmi/id
     Vendor:         Lenovo
     Product:        ThinkSystem SR655 -[7Y00000000]-
     Product Family: ThinkSystem
     Serial:         0123456789

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     8x Samsung M393A4G43AB3-CWE 32 GB 2 rank 3200, configured at 2933
     8x Unknown Unknown

 BIOS:
    BIOS Vendor:       Lenovo
    BIOS Version:      CFE125S
    BIOS Date:         05/11/2021
    BIOS Revision:     6.0

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 619.lbm_s(base, peak) 638.imagick_s(base, peak)
                | 644.nab_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 607.cactuBSSN_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran         | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak)
                | 654.roms_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 621.wrf_s(base, peak) 627.cam4_s(base, peak)
                | 628.pop2_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 clang 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Base Portability Flags

603.bwaves_s:  -DSPEC_LP64 
607.cactuBSSN_s:  -DSPEC_LP64 
619.lbm_s:  -DSPEC_LP64 
621.wrf_s:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
627.cam4_s:  -DSPEC_CASE_FLAG   -DSPEC_LP64 
628.pop2_s:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
638.imagick_s:  -DSPEC_LP64 
644.nab_s:  -DSPEC_LP64 
649.fotonik3d_s:  -DSPEC_LP64 
654.roms_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Fortran benchmarks:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Hz,1,0x1   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp=true   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Benchmarks using both Fortran and C:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Hz,1,0x1   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Benchmarks using Fortran, C, and C++:

 -m64   -mno-adx   -mno-sse4a   -std=c++98   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -mllvm -enable-partial-unswitch   -mllvm -unroll-threshold=100   -finline-aggressive   -mllvm -loop-unswitch-threshold=200000   -mllvm -reroll-loops   -mllvm -aggressive-loop-unswitch   -mllvm -extra-vectorizer-passes   -mllvm -convert-pow-exp-to-int=false   -Hz,1,0x1   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -lsr-in-nested-loop   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Base Other Flags

C benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Fortran benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using both Fortran and C:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using Fortran, C, and C++:

 -Wno-unused-command-line-argument   -Wno-return-type 

Peak Compiler Invocation

C benchmarks:

 clang 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

619.lbm_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
638.imagick_s:  basepeak = yes 
644.nab_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Fortran benchmarks:

603.bwaves_s:  basepeak = yes 
649.fotonik3d_s:  basepeak = yes 
654.roms_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -Mrecursive   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both Fortran and C:

621.wrf_s:  basepeak = yes 
627.cam4_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Mrecursive   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
628.pop2_s:  basepeak = yes 

Benchmarks using Fortran, C, and C++:

 -m64   -mno-adx   -mno-sse4a   -std=c++98   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -finline-aggressive   -mllvm -unroll-threshold=100   -mllvm -reroll-loops   -mllvm -aggressive-loop-unswitch   -Mrecursive   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Peak Other Flags

C benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Fortran benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using both Fortran and C:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using Fortran, C, and C++:

 -Wno-unused-command-line-argument   -Wno-return-type 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Milan1P-G.html,
http://www.spec.org/cpu2017/flags/aocc300-flags-A1.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Milan1P-G.xml,
http://www.spec.org/cpu2017/flags/aocc300-flags-A1.xml.

PTDaemon, SPEC CPU, and SPECspeed are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders.

For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org
Copyright 2017-2021 Standard Performance Evaluation Corporation
Tested with SPEC CPU®2017 v1.1.7 on 2020-04-17 20:50:52-0400.
Report generated on 2021-06-08 20:07:31 by SPEC CPU®2017 HTML formatter v6442.
Originally published on 2021-06-08.