SPEC CPU®2017 Floating Point Speed Result

Copyright 2017-2021 Standard Performance Evaluation Corporation

Hewlett Packard Enterprise (Test Sponsor: HPE)

ProLiant DL325 Gen10 Plus v2
(2.45 GHz, AMD EPYC 7763)

SPECspeed®2017_fp_base = 17000

SPECspeed®2017_fp_peak = 17300

CPU2017 License: 3 Test Date: Feb-2021
Test Sponsor: HPE Hardware Availability: Apr-2021
Tested by: HPE Software Availability: Mar-2021

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: AMD EPYC 7763
  Max MHz: 3500
  Nominal: 2450
Enabled: 64 cores, 1 chip, 2 threads/core
Orderable: 1 chip
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 512 KB I+D on chip per core
  L3: 256 MB I+D on chip per chip,
32 MB shared / 8 cores
  Other: None
Memory: 1 TB (8 x 128 GB 4Rx4 PC4-3200AA-L)
Storage: 1 x 800 GB SAS SSD, RAID 0
Other: None
Software
OS: Ubuntu 20.04.1 LTS (x86_64)
Kernel 5.4.0-54-generic
Compiler: C/C++/Fortran: Version 3.0.0 of AOCC
Parallel: Yes
Firmware: HPE BIOS Version A43 v2.40 02/15/2021 released
Mar-2021
File System: ext4
System State: Run level 5 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc: jemalloc memory allocator library v5.1.0
Power Management: BIOS and OS set to prefer performance at the
cost of additional power usage

Results Table

Benchmark Base Peak
Threads Seconds Ratio Seconds Ratio Seconds Ratio Threads Seconds Ratio Seconds Ratio Seconds Ratio
SPECspeed®2017_fp_base 17000
SPECspeed®2017_fp_peak 17300
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
603.bwaves_s 64 1500 3930 1500 3930 1500 3930 64 1500 3930 1500 3930 1500 3930
607.cactuBSSN_s 64 59.6 2800 59.2 2810 59.2 2810 64 59.2 2820 59.1 2820 58.7 2840
619.lbm_s 64 69.9 74.9 70.0 74.9 69.9 74.9 64 69.6 75.2 69.6 75.2 69.6 75.3
621.wrf_s 64 66.4 1990 66.5 1990 66.3 2000 64 66.2 2000 66.5 1990 66.3 2000
627.cam4_s 64 77.8 1140 79.9 1110 78.0 1140 64 77.0 1150 77.1 1150 77.1 1150
628.pop2_s 64 1410 83.9 1420 83.7 1410 84.3 64 1410 83.9 1420 83.7 1410 84.3
638.imagick_s 64 52.4 2750 52.4 2750 52.6 2740 64 52.4 2750 52.4 2750 52.6 2740
644.nab_s 64 45.7 3820 45.6 3830 45.6 3830 128 41.7 4190 41.7 4190 41.7 4190
649.fotonik3d_s 64 1220 74.9 1220 75.0 1210 75.2 64 1220 74.9 1220 75.0 1210 75.2
654.roms_s 64 97.6 1610 97.5 1620 97.8 1610 64 89.1 1770 89.1 1770 89.0 1770

Compiler Notes

The AMD64 AOCC Compiler Suite is available at
http://developer.amd.com/amd-aocc/

Submit Notes

The config file option 'submit' was used.
'numactl' was used to bind copies to the cores.
See the configuration file for details.

Operating System Notes

'ulimit -s unlimited' was used to set environment stack size
'ulimit -l 2097152' was used to set environment locked pages in memory limit
runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>
'echo 8 > /proc/sys/vm/dirty_ratio' run as root to limit dirty cache to 8% of
memory.
'echo 1 > /proc/sys/vm/swappiness' run as root to limit swap usage to minimum
necessary.
'echo 1 > /proc/sys/vm/zone_reclaim_mode' run as root to free node-local memory
and avoid remote memory usage.
'sync; echo 3 > /proc/sys/vm/drop_caches' run as root to reset filesystem caches.
'sysctl -w kernel.randomize_va_space=0' run as root to disable address space layout
randomization (ASLR) to reduce run-to-run variability.
'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and
'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root to enable
Transparent Hugepages (THP) for this run.
'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root for peak
runs of 628.pop2_s and 638.imagick_s to enable THP only on request.

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
GOMP_CPU_AFFINITY = "0-127"
LD_LIBRARY_PATH =
     "/cpu2017/amd_speed_aocc300_milan_B_lib/64;/cpu2017/amd_speed_aocc300_mi
     lan_B_lib/32:"
MALLOC_CONF = "retain:true"
OMP_DYNAMIC = "false"
OMP_SCHEDULE = "static"
OMP_STACKSIZE = "128M"
OMP_THREAD_LIMIT = "128"

Environment variables set by runcpu during the 607.cactuBSSN_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 619.lbm_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 621.wrf_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 627.cam4_s peak run:
GOMP_CPU_AFFINITY = "0-63"

Environment variables set by runcpu during the 644.nab_s peak run:
GOMP_CPU_AFFINITY = "0 64 1 65 2 66 3 67 4 68 5 69 6 70 7 71 8 72 9 73 10 74
     11 75 12 76 13 77 14 78 15 79 16 80 17 81 18 82 19 83 20 84 21 85 22 86
     23 87 24 88 25 89 26 90 27 91 28 92 29 93 30 94 31 95 32 96 33 97 34 98
     35 99 36 100 37 101 38 102 39 103 40 104 41 105 42 106 43 107 44 108 45
     109 46 110 47 111 48 112 49 113 50 114 51 115 52 116 53 117 54 118 55
     119 56 120 57 121 58 122 59 123 60 124 61 125 62 126 63 127"

Environment variables set by runcpu during the 654.roms_s peak run:
GOMP_CPU_AFFINITY = "0-63"

General Notes

Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using openSUSE 15.2

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.

jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified)
jemalloc 5.1.0 is available here:
https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2

Platform Notes

BIOS Configuration
 Workload Profile set to General Peak Frequency Compute
 Determinism Control set to Manual
  Performance Determinism set to Power Deterministic
 Last-Level Cache (LLC) as NUMA Node set to Enabled
 NUMA memory domains per socket set to One memory domain per socket
 Thermal Configuration set to Maximum Cooling
 Workload Profile set to Custom
  Infinity Fabric Power Management set to Disabled
   Infinity Fabric Performance State set to P0
  Power Regulator set to OS Control Mode

 Sysinfo program /cpu2017/bin/sysinfo
 Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c
 running on dl325gen10plus Mon Mar  1 18:50:55 2021

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : AMD EPYC 7763 64-Core Processor
       1  "physical id"s (chips)
       128 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 64
       siblings  : 128
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
       53 54 55 56 57 58 59 60 61 62 63

 From lscpu:
      Architecture:                    x86_64
      CPU op-mode(s):                  32-bit, 64-bit
      Byte Order:                      Little Endian
      Address sizes:                   48 bits physical, 48 bits virtual
      CPU(s):                          128
      On-line CPU(s) list:             0-127
      Thread(s) per core:              2
      Core(s) per socket:              64
      Socket(s):                       1
      NUMA node(s):                    8
      Vendor ID:                       AuthenticAMD
      CPU family:                      25
      Model:                           1
      Model name:                      AMD EPYC 7763 64-Core Processor
      Stepping:                        1
      Frequency boost:                 enabled
      CPU MHz:                         3421.520
      CPU max MHz:                     2450.0000
      CPU min MHz:                     1500.0000
      BogoMIPS:                        4890.71
      Virtualization:                  AMD-V
      L1d cache:                       2 MiB
      L1i cache:                       2 MiB
      L2 cache:                        32 MiB
      L3 cache:                        256 MiB
      NUMA node0 CPU(s):               0-7,64-71
      NUMA node1 CPU(s):               8-15,72-79
      NUMA node2 CPU(s):               16-23,80-87
      NUMA node3 CPU(s):               24-31,88-95
      NUMA node4 CPU(s):               32-39,96-103
      NUMA node5 CPU(s):               40-47,104-111
      NUMA node6 CPU(s):               48-55,112-119
      NUMA node7 CPU(s):               56-63,120-127
      Vulnerability Itlb multihit:     Not affected
      Vulnerability L1tf:              Not affected
      Vulnerability Mds:               Not affected
      Vulnerability Meltdown:          Not affected
      Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via
      prctl and seccomp
      Vulnerability Spectre v1:        Mitigation; usercopy/swapgs barriers and __user
      pointer sanitization
      Vulnerability Spectre v2:        Mitigation; Full AMD retpoline, IBPB conditional,
      IBRS_FW, STIBP always-on, RSB filling
      Vulnerability Srbds:             Not affected
      Vulnerability Tsx async abort:   Not affected
      Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
      pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
      pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid
      aperfmperf pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes
      xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
      misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb
      bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs
      ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 invpcid cqm rdt_a rdseed adx smap
      clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc
      cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr wbnoinvd arat npt lbrv svm_lock
      nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
      v_vmsave_vmload vgif umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca

 /proc/cpuinfo cache data
    cache size : 512 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 8 nodes (0-7)
   node 0 cpus: 0 1 2 3 4 5 6 7 64 65 66 67 68 69 70 71
   node 0 size: 128773 MB
   node 0 free: 128204 MB
   node 1 cpus: 8 9 10 11 12 13 14 15 72 73 74 75 76 77 78 79
   node 1 size: 129020 MB
   node 1 free: 128828 MB
   node 2 cpus: 16 17 18 19 20 21 22 23 80 81 82 83 84 85 86 87
   node 2 size: 129020 MB
   node 2 free: 128836 MB
   node 3 cpus: 24 25 26 27 28 29 30 31 88 89 90 91 92 93 94 95
   node 3 size: 129020 MB
   node 3 free: 128835 MB
   node 4 cpus: 32 33 34 35 36 37 38 39 96 97 98 99 100 101 102 103
   node 4 size: 129020 MB
   node 4 free: 128682 MB
   node 5 cpus: 40 41 42 43 44 45 46 47 104 105 106 107 108 109 110 111
   node 5 size: 129020 MB
   node 5 free: 128868 MB
   node 6 cpus: 48 49 50 51 52 53 54 55 112 113 114 115 116 117 118 119
   node 6 size: 129020 MB
   node 6 free: 128752 MB
   node 7 cpus: 56 57 58 59 60 61 62 63 120 121 122 123 124 125 126 127
   node 7 size: 116882 MB
   node 7 free: 116421 MB
   node distances:
   node   0   1   2   3   4   5   6   7
     0:  10  11  11  11  11  11  11  11
     1:  11  10  11  11  11  11  11  11
     2:  11  11  10  11  11  11  11  11
     3:  11  11  11  10  11  11  11  11
     4:  11  11  11  11  10  11  11  11
     5:  11  11  11  11  11  10  11  11
     6:  11  11  11  11  11  11  10  11
     7:  11  11  11  11  11  11  11  10

 From /proc/meminfo
    MemTotal:       1044252936 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
    performance

 /usr/bin/lsb_release -d
    Ubuntu 20.04.1 LTS

 From /etc/*release* /etc/*version*
    debian_version: bullseye/sid
    os-release:
       NAME="Ubuntu"
       VERSION="20.04.1 LTS (Focal Fossa)"
       ID=ubuntu
       ID_LIKE=debian
       PRETTY_NAME="Ubuntu 20.04.1 LTS"
       VERSION_ID="20.04"
       HOME_URL="https://www.ubuntu.com/"
       SUPPORT_URL="https://help.ubuntu.com/"

 uname -a:
    Linux dl325gen10plus 5.4.0-54-generic #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020
    x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Full AMD retpoline,
                                                        IBPB: conditional, IBRS_FW, STIBP:
                                                        always-on, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 5 Mar 1 14:56

 SPEC is set to: /cpu2017
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sdb2      ext4  733G   23G  673G   4% /

 From /sys/devices/virtual/dmi/id
     Vendor:         HPE
     Product:        ProLiant DL325 Gen10 Plus
     Product Family: ProLiant
     Serial:         CN79290FKQ

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     8x UNKNOWN M386AAG40AM3-CWE 128 GB 4 rank 3200
     8x UNKNOWN NOT AVAILABLE

 BIOS:
    BIOS Vendor:       HPE
    BIOS Version:      A43
    BIOS Date:         02/15/2021
    BIOS Revision:     2.40
    Firmware Revision: 2.40

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 619.lbm_s(base, peak) 638.imagick_s(base, peak)
                | 644.nab_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 607.cactuBSSN_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran         | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak)
                | 654.roms_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 621.wrf_s(base, peak) 627.cam4_s(base, peak)
                | 628.pop2_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 clang 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Base Portability Flags

603.bwaves_s:  -DSPEC_LP64 
607.cactuBSSN_s:  -DSPEC_LP64 
619.lbm_s:  -DSPEC_LP64 
621.wrf_s:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
627.cam4_s:  -DSPEC_CASE_FLAG   -DSPEC_LP64 
628.pop2_s:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
638.imagick_s:  -DSPEC_LP64 
644.nab_s:  -DSPEC_LP64 
649.fotonik3d_s:  -DSPEC_LP64 
654.roms_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Fortran benchmarks:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Hz,1,0x1   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp=true   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Benchmarks using both Fortran and C:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Hz,1,0x1   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Benchmarks using Fortran, C, and C++:

 -m64   -mno-adx   -mno-sse4a   -std=c++98   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -mllvm -enable-partial-unswitch   -mllvm -unroll-threshold=100   -finline-aggressive   -mllvm -loop-unswitch-threshold=200000   -mllvm -reroll-loops   -mllvm -aggressive-loop-unswitch   -mllvm -extra-vectorizer-passes   -mllvm -convert-pow-exp-to-int=false   -Hz,1,0x1   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -lsr-in-nested-loop   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Base Other Flags

C benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Fortran benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using both Fortran and C:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using Fortran, C, and C++:

 -Wno-unused-command-line-argument   -Wno-return-type 

Peak Compiler Invocation

C benchmarks:

 clang 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

619.lbm_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
638.imagick_s:  basepeak = yes 
644.nab_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Fortran benchmarks:

603.bwaves_s:  basepeak = yes 
649.fotonik3d_s:  basepeak = yes 
654.roms_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -Mrecursive   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both Fortran and C:

621.wrf_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Hz,1,0x1   -O3   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
627.cam4_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Mrecursive   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
628.pop2_s:  basepeak = yes 

Benchmarks using Fortran, C, and C++:

 -m64   -mno-adx   -mno-sse4a   -std=c++98   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -finline-aggressive   -mllvm -unroll-threshold=100   -mllvm -reroll-loops   -mllvm -aggressive-loop-unswitch   -Mrecursive   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Peak Other Flags

C benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Fortran benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using both Fortran and C:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using Fortran, C, and C++:

 -Wno-unused-command-line-argument   -Wno-return-type 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/aocc300-flags-A1.html,
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revP.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/aocc300-flags-A1.xml,
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revP.xml.