# Invocation command line: # /dev/shm/cpu2006-32S/bin/runspec --rate --copies 1792 -c cpu2006-1.2-ic17.0u3-lin-ws-core-avx512-rate-20170411.cfg --define smt-on --define cores=896 --define --define invoke_with_interleave --define drop_caches --tune base -o asc,cvf,csv,htm int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20170411 Intel(R) C/C++ and Fortran 17.0 Update 3 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Update 3 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX512 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20170411 ext = cpu2006-1.2-ic17.0u3-lin-ws-core-avx512-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64-revF.xml flagsurl001=http://www.spec.org/cpu2006/flags/HPE-Superdome_Flex-RevA.xml %ifdef %{default-platform-flags} flagsurl2=Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64:$[top]/sh10.2 # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OBJ = .o SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command parallel_setup = 28 parallel_setup_type = fork parallel_setup_prefork = let "MYCPU = $SPECCOPYNUM"; taskset -pc \$MYCPU $$ %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX512 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # portability & libraries ################################################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language int=base=default=default: COPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -qopt-mem-layout-trans=3 CXXOPTIMIZE= -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -qopt-prefetch -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 403.gcc=peak=default: feedback=0 COPTIMIZE = -qopt-mem-layout-trans=3 OPTIMIZE= $(FAST_NO_STATIC) 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS2_CFLAGS = -prof-use $(SSE) PASS2_CXXFLAGS = -prof-use $(SSE) PASS2_FFLAGS = -prof-use $(SSE) PASS2_LDFLAGS = -prof-use $(SSE) 456.hmmer=peak=default: feedback=0 CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll2 -auto-ilp32 -qopt-mem-layout-trans=3 OPTIMIZE= $(FAST_NO_STATIC) PORTABILITY= 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -qopt-mem-layout-trans=3 471.omnetpp=peak=default: CXXOPTIMIZE= -qopt-ra-region-strategy=block -qopt-mem-layout-trans=3 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: OPTIMIZE= -qopt-prefetch PASS2_CFLAGS = -prof-use $(SSE) PASS2_CXXFLAGS = -prof-use $(SSE) PASS2_FFLAGS = -prof-use $(SSE) PASS2_LDFLAGS = -prof-use $(SSE) 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 -qopt-mem-layout-trans=3 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OPTIMIZE= -qopt-malloc-options=3 CXXOPTIMIZE= -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -qopt-mem-layout-trans=3 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -qopt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = HPE hw_avail = Mar-2018 sw_avail = Mar-2018 tester = HPE hw_cpu_name = Intel Xeon Gold 8180 hw_cpu_char = Intel Turbo Boost Technology up to 3.80 GHz hw_cpu_mhz = 2500 hw_disk = 24 TB tmpfs hw_fpu = Integrated hw_memory000 = 24 TB (384 x 64 GB 4Rx4 PC4-2666V-L) hw_model000 = Superdome Flex hw_model001 = (2.50 GHz, Intel Xeon Platinum 8180) hw_ncpuorder = 4 to 32 chips hw_ncores = 896 hw_nchips = 32 hw_ncoresperchip = 28 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per core hw_tcache = 38.5 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett Packard Enterprise prepared_by = HPC Performance Engineering sw_file = tmpfs sw_os001 = SUSE Linux Enterprise Server 12 SP3, sw_os002 = Kernel 4.4.92-6.18-default sw_other001 = HPE Foundation Software 1.0, sw_other002 = Build 717a130.sles12sp3-1710052000 sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled with: notes_os_010 = echo always > /sys/kernel/mm/transparent_hugepage/enabled notes_os_015 = Filesystem page cache cleared with: notes_os_020 = shell invocation of 'sync; echo 3 > /proc/sys/vm/drop_caches' prior to run notes_os_025 = The tmpfs filesystem was set up with: notes_os_030 = mkdir -p /dev/shm/cpu2006-32S notes_os_035 = mount -t tmpfs -o size=24576G,rw tmpfs /dev/shm/cpu2006-32S notes_plat_000 = Rack Management Controller setting: notes_plat_005 = modify npar pnum=0 ras=hpc notes_plat_010 = int=default=default=default: sw_compiler000 = C/C++: Version 17.0.3.191 of Intel C/C++ sw_compiler001 = Compiler for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = Not Applicable sw_other000 = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else %endif %ifdef %{drop_caches} %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 17.0.3.191 of Intel C/C++ sw_compiler002 = Compiler for Linux; sw_compiler004 = Fortran: Version 17.0.3.191 of Intel Fortran sw_compiler005 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993' default: notes_plat_sysinfo_000 = Sysinfo program /dev/shm/cpu2006-32S/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on uv4test33-sys Sun Dec 17 20:21:46 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz notes_plat_sysinfo_050 = 32 "physical id"s (chips) notes_plat_sysinfo_055 = 1792 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 28 notes_plat_sysinfo_080 = siblings : 56 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_090 = 25 26 27 28 29 30 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_100 = 25 26 27 28 29 30 notes_plat_sysinfo_105 = physical 2: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_110 = 25 26 27 28 29 30 notes_plat_sysinfo_115 = physical 3: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_120 = 25 26 27 28 29 30 notes_plat_sysinfo_125 = physical 4: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_130 = 25 26 27 28 29 30 notes_plat_sysinfo_135 = physical 5: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_140 = 25 26 27 28 29 30 notes_plat_sysinfo_145 = physical 6: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_150 = 25 26 27 28 29 30 notes_plat_sysinfo_155 = physical 7: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_160 = 25 26 27 28 29 30 notes_plat_sysinfo_165 = physical 8: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_170 = 25 26 27 28 29 30 notes_plat_sysinfo_175 = physical 9: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 notes_plat_sysinfo_180 = 25 26 27 28 29 30 notes_plat_sysinfo_185 = physical 10: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_190 = 24 25 26 27 28 29 30 notes_plat_sysinfo_195 = physical 11: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_200 = 24 25 26 27 28 29 30 notes_plat_sysinfo_205 = physical 12: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_210 = 24 25 26 27 28 29 30 notes_plat_sysinfo_215 = physical 13: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_220 = 24 25 26 27 28 29 30 notes_plat_sysinfo_225 = physical 14: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_230 = 24 25 26 27 28 29 30 notes_plat_sysinfo_235 = physical 15: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_240 = 24 25 26 27 28 29 30 notes_plat_sysinfo_245 = physical 16: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_250 = 24 25 26 27 28 29 30 notes_plat_sysinfo_255 = physical 17: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_260 = 24 25 26 27 28 29 30 notes_plat_sysinfo_265 = physical 18: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_270 = 24 25 26 27 28 29 30 notes_plat_sysinfo_275 = physical 19: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_280 = 24 25 26 27 28 29 30 notes_plat_sysinfo_285 = physical 20: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_290 = 24 25 26 27 28 29 30 notes_plat_sysinfo_295 = physical 21: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_300 = 24 25 26 27 28 29 30 notes_plat_sysinfo_305 = physical 22: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_310 = 24 25 26 27 28 29 30 notes_plat_sysinfo_315 = physical 23: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_320 = 24 25 26 27 28 29 30 notes_plat_sysinfo_325 = physical 24: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_330 = 24 25 26 27 28 29 30 notes_plat_sysinfo_335 = physical 25: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_340 = 24 25 26 27 28 29 30 notes_plat_sysinfo_345 = physical 26: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_350 = 24 25 26 27 28 29 30 notes_plat_sysinfo_355 = physical 27: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_360 = 24 25 26 27 28 29 30 notes_plat_sysinfo_365 = physical 28: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_370 = 24 25 26 27 28 29 30 notes_plat_sysinfo_375 = physical 29: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_380 = 24 25 26 27 28 29 30 notes_plat_sysinfo_385 = physical 30: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_390 = 24 25 26 27 28 29 30 notes_plat_sysinfo_395 = physical 31: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 notes_plat_sysinfo_400 = 24 25 26 27 28 29 30 notes_plat_sysinfo_405 = cache size : 39424 KB notes_plat_sysinfo_410 = notes_plat_sysinfo_415 = From /proc/meminfo notes_plat_sysinfo_420 = MemTotal: 24592336740 kB notes_plat_sysinfo_425 = HugePages_Total: 0 notes_plat_sysinfo_430 = Hugepagesize: 2048 kB notes_plat_sysinfo_435 = notes_plat_sysinfo_440 = /usr/bin/lsb_release -d notes_plat_sysinfo_445 = SUSE Linux Enterprise Server 12 SP3 notes_plat_sysinfo_450 = notes_plat_sysinfo_455 = From /etc/*release* /etc/*version* notes_plat_sysinfo_460 = SuSE-release: notes_plat_sysinfo_465 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_470 = VERSION = 12 notes_plat_sysinfo_475 = PATCHLEVEL = 3 notes_plat_sysinfo_480 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_485 = release. notes_plat_sysinfo_490 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_495 = hpe-foundation-release: HPE Foundation Software 1.0, Build notes_plat_sysinfo_500 = 717a130.sles12sp3-1710052000 notes_plat_sysinfo_505 = os-release: notes_plat_sysinfo_510 = NAME="SLES" notes_plat_sysinfo_515 = VERSION="12-SP3" notes_plat_sysinfo_520 = VERSION_ID="12.3" notes_plat_sysinfo_525 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP3" notes_plat_sysinfo_530 = ID="sles" notes_plat_sysinfo_535 = ANSI_COLOR="0;32" notes_plat_sysinfo_540 = CPE_NAME="cpe:/o:suse:sles:12:sp3" notes_plat_sysinfo_545 = notes_plat_sysinfo_550 = uname -a: notes_plat_sysinfo_555 = Linux uv4test33-sys 4.4.92-6.18-default #1 SMP Fri Oct 20 18:58:48 UTC 2017 notes_plat_sysinfo_560 = (a69df70) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = run-level 3 Dec 17 19:05 notes_plat_sysinfo_575 = notes_plat_sysinfo_580 = SPEC is set to: /dev/shm/cpu2006-32S notes_plat_sysinfo_585 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_590 = tmpfs tmpfs 24T 2.1G 24T 1% /dev/shm/cpu2006-32S notes_plat_sysinfo_595 = Additional information from dmidecode: notes_plat_sysinfo_600 = notes_plat_sysinfo_605 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_610 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_615 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_620 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_625 = notes_plat_sysinfo_630 = BIOS HPE IP147.006.000.143.000.1712051837 12/05/2017 notes_plat_sysinfo_635 = Memory: notes_plat_sysinfo_640 = 384x Samsung M386A8K40BM2-CTD 64 GB 4 rank 2666 MHz notes_plat_sysinfo_645 = notes_plat_sysinfo_650 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Platinum 8180 hw_disk = 24 TB tmpfs hw_nchips = 32 prepared_by = HPC Performance Engineering sw_file = tmpfs sw_os000 = SUSE Linux Enterprise Server 12 (x86_64) SP3, sw_os001 = Kernel 4.4.92-6.18-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/dev/shm/cpu2006-32S/lib/ia32:/dev/shm/cpu2006-32S/lib/intel64:/dev/shm/cpu2006-32S/sh10.2" notes_010 =