# Invocation command line: # /hpe/cpu2006/bin/runspec --define default-platform-flags --rate --copies 8 -c cpu2006-1.2-ic17.0-lin-ws-core-avx2-rate-20160922.cfg --define smt-on --define cores=4 --define physicalfirst --define no-numa --tune base -o all int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20170210 ext = cpu2006-1.2-ic17.0-lin-ws-core-avx2-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above # fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 -f use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/HPE-Compiler-Flags-Intel-V1.2-HSW-revI.xml flagsurl001 = http://www.spec.org/cpu2006/flags/HPE-Platform-Flags-Intel-V1.2-HSW-revG.xml %ifdef %{default-platform-flags} %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OBJ = .o SMARTHEAP32_DIR = $[top]/sh10.2 SMARTHEAP64_DIR = $[top]/sh10.2 PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 SMARTHEAP32_DIR = $[top]/sh10.2 SMARTHEAP64_DIR = $[top]/sh10.2 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -no-prec-sqrt -static ################################################################ # portability & libraries ################################################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language int=base=default=default: COPTIMIZE= $(FAST) -qopt-prefetch -qopt-mem-layout-trans=3 -auto-ilp32 -complex-limited-range -qopt-prefetch-issue-excl-hint -ansi-alias -unroll-aggressive -use-intel-optimized-headers -qopt-matmul -qopt-subscript-in-range -qopt-assume-safe-padding -qopt-calloc -inline-calloc -qopt-malloc-options=3 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 -use-intel-optimized-headers -unroll-aggressive -qopt-calloc -inline-calloc -qopt-malloc-options=3 fp=base=default=default: OPTIMIZE= $(FAST) -qopt-prefetch -fp-model fast=2 -qopt-prefetch-issue-excl-hint COPTIMIZE= $(FAST) $(FAST) -qopt-prefetch -qopt-mem-layout-trans=3 -auto-ilp32 -complex-limited-range -qopt-prefetch-issue-excl-hint -ansi-alias -unroll-aggressive -use-intel-optimized-headers -qopt-matmul -qopt-subscript-in-range -qopt-assume-safe-padding -qopt-calloc -inline-calloc -qopt-malloc-options=3 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 -use-intel-optimized-headers -unroll-aggressive -qopt-calloc -inline-calloc -qopt-malloc-options=3 # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias -qopt-mem-layout-trans=3 CXXOPTIMIZE= -ansi-alias -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 PORTABILITY= 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -qopt-prefetch -auto-ilp32 -ansi-alias PORTABILITY= 403.gcc=peak=default: feedback=0 COPTIMIZE = $(FAST_NO_STATIC) 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: #PASS2_CFLAGS = -prof-use $(SSE) #PASS2_CXXFLAGS = -prof-use $(SSE) #PASS2_FFLAGS = -prof-use $(SSE) #PASS2_LDFLAGS = -prof-use $(SSE) PASS1_CFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: feedback=0 CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll2 -auto-ilp32 OPTIMIZE= $(FAST_NO_STATIC) PORTABILITY= 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 PORTABILITY= 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -qopt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CFLAGS = $(FAST) -qopt-mem-layout-trans=3 -prof-use PASS1_CXXFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CXXFLAGS = $(FAST) -qopt-mem-layout-trans=3 -prof-use PASS1_FFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST) PASS1_LDFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST) 410.bwaves=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -qopt-prefetch 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: feedback=0 OPTIMIZE= -qopt-prefetch -qopt-malloc-options=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OPTIMIZE= -qopt-malloc-options=3 CXXOPTIMIZE= #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -qopt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: OPTIMIZE= $(FAST) feedback=0 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = HPE hw_avail = May-2017 sw_avail = Nov-2016 tester = HPE hw_cpu_name = Intel Xeon E3-1280 v6 hw_cpu_char = Intel Turbo Boost Technology up to 4.20 GHz #hw_cpu_char = hw_cpu_mhz = 3900 hw_disk = 1 x 1 TB SATA 7.2 K RPM, RAID 0 hw_fpu = Integrated hw_memory = 64 GB (4 x 16 GB 2Rx8 PC4-2400T-E) hw_model000 = ProLiant ML30 Gen9 hw_model001 = (3.90 GHz, Intel Xeon E3-1280 v6) hw_ncpuorder = 1 chips hw_ncores = 4 hw_nchips = 1 hw_ncoresperchip = 4 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett Packard Enterprise prepared_by = HPE Performance Engineering sw_file = xfs sw_os001 = Red Hat Enterprise Linux Server 7.3 sw_os000 = Red Hat Enterprise Linux Server 7.3 sw_os001 = Kernel 3.10.0-514 sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790K CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled by default notes_os_010 = Filesystem page cache cleared with: notes_os_015 = echo 1 > /proc/sys/vm/drop_caches notes_os_020 = runspec command invoked through numactl i.e.: notes_os_025 = numactl --interleave=all runspec notes_plat_000 = BIOS Configuration: #notes_plat_005 = Intel Hyperthreading set to Enabled notes_plat_005 = Power Profile set to Custom notes_plat_010 = Minimum Processor Idle Power Core C-State set to C3 State #notes_plat_025 = Minimum Processor Idle Power Package C-State set to Package C6 (retention) State notes_plat_015 = Minimum Processor Idle Power Package C-State set to No Package State notes_plat_020 = Energy/Performance Bias set to Maximum Performance notes_plat_025 = Thermal Configuration set to Maximum Cooling notes_plat_030 = Processor Power and Utilization Monitoring set to Disabled notes_plat_035 = Memory Double Refresh Rate set to 1x Refresh notes_plat_040 = NUMA Group Size Optimization set to Flat notes_plat_045 = int=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler001 = Compiler for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = Not Applicable sw_other = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux; sw_compiler004 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler005 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993 -f' default: notes_plat_sysinfo_000 = Sysinfo program /hpe/cpu2006/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on ML30-G9-RHEL7.3 Mon Mar 27 01:40:29 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E3-1280 v6 @ 3.90GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 8 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 4 notes_plat_sysinfo_080 = siblings : 8 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 notes_plat_sysinfo_090 = cache size : 8192 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 65585572 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From /etc/*release* /etc/*version* notes_plat_sysinfo_130 = os-release: notes_plat_sysinfo_135 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_140 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_145 = ID="rhel" notes_plat_sysinfo_150 = ID_LIKE="fedora" notes_plat_sysinfo_155 = VERSION_ID="7.3" notes_plat_sysinfo_160 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_165 = ANSI_COLOR="0;31" notes_plat_sysinfo_170 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_175 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_180 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_185 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = uname -a: notes_plat_sysinfo_200 = Linux ML30-G9-RHEL7.3 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT notes_plat_sysinfo_205 = 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_210 = notes_plat_sysinfo_215 = run-level 3 Mar 25 11:22 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = SPEC is set to: /hpe/cpu2006 notes_plat_sysinfo_230 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_235 = /dev/sda5 xfs 500G 126G 375G 26% / notes_plat_sysinfo_240 = Additional information from dmidecode: notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_255 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_260 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_265 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = BIOS HP U23 01/17/2017 notes_plat_sysinfo_280 = Memory: notes_plat_sysinfo_285 = 4x UNKNOWN NOT AVAILABLE 16 GB 2 rank 2400 MHz notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # hw_cpu_name = Intel Xeon E3-1280 v6 # hw_disk = 500 GB add more disk info here # hw_memory001 = 62.547 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 1 # prepared_by = root (is never output, only tags rawfile) # sw_file = xfs # sw_os001 = Red Hat Enterprise Linux Server release 7.3 (Maipo) # sw_os002 = 3.10.0-514.el7.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/hpe/cpu2006/libs/32:/hpe/cpu2006/libs/64:/hpe/cpu2006/sh10.2" notes_010 =