CPU2006 license: | 19 | Test date: | Nov-2014 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | Sep-2014 |
Tested by: | Fujitsu | Software Availability: | Sep-2013 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2640 v3 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.40 GHz |
CPU MHz: | 2600 |
FPU: | Integrated |
CPU(s) enabled: | 16 cores, 2 chips, 8 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R, running at 1866 MHz) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.5 (Santiago) 2.6.32-431.23.3.el6.x86_64 |
Compiler: | C/C++: Version 14.0.0.080 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 32 | 593 | 527 | 587 | 532 | 594 | 527 | 32 | 482 | 648 | 482 | 649 | 483 | 648 |
401.bzip2 | 32 | 898 | 344 | 897 | 344 | 898 | 344 | 32 | 858 | 360 | 860 | 359 | 860 | 359 |
403.gcc | 32 | 482 | 534 | 482 | 534 | 480 | 537 | 32 | 482 | 534 | 482 | 534 | 480 | 537 |
429.mcf | 32 | 303 | 962 | 305 | 956 | 305 | 956 | 32 | 303 | 962 | 305 | 956 | 305 | 956 |
445.gobmk | 32 | 722 | 465 | 721 | 465 | 722 | 465 | 32 | 704 | 477 | 703 | 477 | 704 | 477 |
456.hmmer | 32 | 292 | 1020 | 295 | 1010 | 296 | 1010 | 32 | 290 | 1030 | 290 | 1030 | 288 | 1030 |
458.sjeng | 32 | 785 | 494 | 786 | 492 | 784 | 494 | 32 | 760 | 510 | 759 | 510 | 760 | 509 |
462.libquantum | 32 | 92.8 | 7150 | 92.8 | 7140 | 92.8 | 7140 | 32 | 92.8 | 7150 | 92.8 | 7140 | 92.8 | 7140 |
464.h264ref | 32 | 868 | 816 | 881 | 804 | 855 | 828 | 32 | 858 | 825 | 833 | 850 | 867 | 817 |
471.omnetpp | 32 | 513 | 390 | 514 | 389 | 515 | 389 | 32 | 493 | 405 | 488 | 410 | 491 | 407 |
473.astar | 32 | 582 | 386 | 581 | 386 | 583 | 385 | 32 | 582 | 386 | 581 | 386 | 583 | 385 |
483.xalancbmk | 32 | 283 | 780 | 283 | 780 | 284 | 776 | 32 | 283 | 780 | 283 | 780 | 284 | 776 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration: Energy Performance = Performance QPI snoop mode: Early Snoop COD Enable = Disabled, Early Snoop = Enabled CPU C1E Support = Disabled
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/SPECcpu2006/libs/32:/home/SPECcpu2006/libs/64:/home/SPECcpu2006/sh" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RedHat EL 6.4 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | basepeak = yes |
429.mcf: | basepeak = yes |
445.gobmk: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xCORE-AVX2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |