| CPU2006 license: | 001176 | Test date: | Sep-2012 |
|---|---|---|---|
| Test sponsor: | Supermicro | Hardware Availability: | Sep-2012 |
| Tested by: | Supermicro | Software Availability: | Aug-2012 |
| Hardware | |
|---|---|
| CPU Name: | AMD Opteron 6348 |
| CPU Characteristics: | AMD Turbo CORE technology up to 3.40 GHz |
| CPU MHz: | 2800 |
| FPU: | Integrated |
| CPU(s) enabled: | 24 cores, 2 chips, 12 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 384 KB I on chip per chip, 64 KB I shared / 2 cores; 16 KB D on chip per core |
| Secondary Cache: | 12 MB I+D on chip per chip, 2 MB shared / 2 cores |
| L3 Cache: | 16 MB I+D on chip per chip, 8 MB shared / 6 cores |
| Other Cache: | None |
| Memory: | 128 GB (16 x 8 GB 2Rx4 PC3-12800R-11, ECC) |
| Disk Subsystem: | 1 x 500 GB SATA, 7200 RPM |
| Other Hardware: | None |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 6.2, Kernel 2.6.32-220.el6.x86_64 |
| Compiler: | C/C++/Fortran: Version 4.5.2 of x86 Open64 Compiler Suite (from AMD) |
| Auto Parallel: | No |
| File System: | ext3 |
| System State: | Run level 3 (Full multiuser with network) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 32/64-bit |
| Other Software: | None |
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 410.bwaves | 24 | 1048 | 311 | 1046 | 312 | 1046 | 312 | 24 | 1033 | 316 | 1033 | 316 | 1033 | 316 |
| 416.gamess | 24 | 1606 | 293 | 1612 | 291 | 1619 | 290 | 24 | 1485 | 316 | 1487 | 316 | 1484 | 317 |
| 433.milc | 24 | 815 | 270 | 815 | 270 | 814 | 271 | 24 | 693 | 318 | 694 | 318 | 693 | 318 |
| 434.zeusmp | 24 | 595 | 367 | 586 | 372 | 591 | 370 | 24 | 569 | 384 | 567 | 385 | 562 | 388 |
| 435.gromacs | 24 | 487 | 352 | 486 | 352 | 487 | 352 | 24 | 393 | 437 | 393 | 436 | 392 | 437 |
| 436.cactusADM | 24 | 633 | 453 | 631 | 455 | 632 | 454 | 24 | 560 | 512 | 559 | 513 | 559 | 513 |
| 437.leslie3d | 24 | 1011 | 223 | 1011 | 223 | 1011 | 223 | 24 | 821 | 275 | 824 | 274 | 821 | 275 |
| 444.namd | 24 | 666 | 289 | 679 | 284 | 679 | 284 | 24 | 570 | 337 | 568 | 339 | 571 | 337 |
| 447.dealII | 24 | 425 | 647 | 416 | 659 | 427 | 644 | 24 | 404 | 679 | 396 | 693 | 399 | 689 |
| 450.soplex | 24 | 752 | 266 | 752 | 266 | 752 | 266 | 24 | 693 | 289 | 692 | 289 | 693 | 289 |
| 453.povray | 24 | 329 | 388 | 330 | 387 | 329 | 388 | 24 | 286 | 446 | 286 | 446 | 287 | 445 |
| 454.calculix | 24 | 350 | 566 | 351 | 564 | 350 | 566 | 24 | 336 | 589 | 335 | 590 | 336 | 590 |
| 459.GemsFDTD | 24 | 1217 | 209 | 1221 | 208 | 1220 | 209 | 24 | 1088 | 234 | 1089 | 234 | 1089 | 234 |
| 465.tonto | 24 | 684 | 345 | 693 | 341 | 695 | 340 | 24 | 621 | 381 | 622 | 380 | 647 | 365 |
| 470.lbm | 24 | 769 | 429 | 770 | 428 | 769 | 429 | 24 | 767 | 430 | 770 | 428 | 796 | 414 |
| 481.wrf | 24 | 701 | 383 | 701 | 382 | 701 | 382 | 24 | 716 | 374 | 696 | 385 | 700 | 383 |
| 482.sphinx3 | 24 | 1396 | 335 | 1397 | 335 | 1398 | 335 | 24 | 1141 | 410 | 1101 | 425 | 1156 | 405 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit Set transparent_hugepage=never as a boot parameter in /boot/grub/menu.lst Set vm/nr_hugepages=21504 in /etc/sysctl.conf mount -t hugetlbfs nodev /mnt/hugepages
Environment variables set by runspec before the start of the run: HUGETLB_LIMIT = "896" LD_LIBRARY_PATH = "/home/spec/amd1206-rate-libs-revA/32:/home/spec/amd1206-rate-libs-revA/64" The x86 Open64 Compiler Suite is only available from (and supported by) AMD at http://developer.amd.com/cpu/open64 Binaries were compiled on a system with 2x AMD Opteron 6386SE chips + 128GB Memory using RHEL 6.3
| opencc |
| openCC |
| openf95 |
| opencc openf95 |
| 410.bwaves: | -DSPEC_CPU_LP64 |
| 416.gamess: | -DSPEC_CPU_LP64 |
| 433.milc: | -DSPEC_CPU_LP64 |
| 434.zeusmp: | -DSPEC_CPU_LP64 |
| 435.gromacs: | -DSPEC_CPU_LP64 |
| 436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
| 437.leslie3d: | -DSPEC_CPU_LP64 |
| 444.namd: | -DSPEC_CPU_LP64 |
| 447.dealII: | -DSPEC_CPU_LP64 |
| 450.soplex: | -DSPEC_CPU_LP64 |
| 453.povray: | -DSPEC_CPU_LP64 |
| 454.calculix: | -DSPEC_CPU_LP64 |
| 459.GemsFDTD: | -DSPEC_CPU_LP64 |
| 465.tonto: | -DSPEC_CPU_LP64 |
| 470.lbm: | -DSPEC_CPU_LP64 |
| 481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
| 482.sphinx3: | -DSPEC_CPU_LP64 |
| -Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 |
| -Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET -march=bdver1 |
| -Ofast -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 -HP:bd=2m:heap=2m -mso -march=bdver1 |
| -Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 |
| opencc |
| openCC |
| openf95 |
| opencc openf95 |
| 410.bwaves: | -DSPEC_CPU_LP64 |
| 416.gamess: | -DSPEC_CPU_LP64 |
| 433.milc: | -DSPEC_CPU_LP64 |
| 434.zeusmp: | -DSPEC_CPU_LP64 |
| 435.gromacs: | -DSPEC_CPU_LP64 |
| 436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
| 437.leslie3d: | -DSPEC_CPU_LP64 |
| 444.namd: | -DSPEC_CPU_LP64 |
| 453.povray: | -DSPEC_CPU_LP64 |
| 454.calculix: | -DSPEC_CPU_LP64 |
| 459.GemsFDTD: | -DSPEC_CPU_LP64 |
| 465.tonto: | -DSPEC_CPU_LP64 |
| 470.lbm: | -DSPEC_CPU_LP64 |
| 481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |