CPU2006 license: | 19 | Test date: | Mar-2008 |
---|---|---|---|
Test sponsor: | Fujitsu Limited | Hardware Availability: | May-2008 |
Tested by: | Fujitsu Limited | Software Availability: | Feb-2008 |
Hardware | |
---|---|
CPU Name: | Dual-Core Intel Itanium 9130M |
CPU Characteristics: | 1.66GHz/8MB, 667MHz FSB |
CPU MHz: | 1667 |
FPU: | Integrated |
CPU(s) enabled: | 64 cores, 32 chips, 2 cores/chip |
CPU(s) orderable: | 2-32 chips |
Primary Cache: | 16 KB I + 16 KB D on chip per core |
Secondary Cache: | 1 MB I + 256 KB D on chip per core |
L3 Cache: | 4 MB I+D on chip per core |
Other Cache: | None |
Memory: | 512 GB (256 x 2GB DDR2-667 DIMMs) |
Disk Subsystem: | 2 x 147GB (SCSI Ultra 320, 10000rpm) No RAID configuration |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux 5.1, Kernel 2.6.18-53.el5 on an ia64 |
Compiler: | Intel C++ Compiler for Linux 10.1 (Build 20080112) |
Auto Parallel: | No |
File System: | ext2 |
System State: | Runlevel 1 (single user mode) |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | MicroQuill Smartheap 8.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 64 | 1170 | 534 | 1171 | 534 | 1171 | 534 | 64 | 962 | 650 | 962 | 650 | 962 | 650 |
401.bzip2 | 64 | 1185 | 521 | 1189 | 520 | 1208 | 511 | 64 | 1177 | 525 | 1183 | 522 | 1187 | 520 |
403.gcc | 64 | 1247 | 413 | 1252 | 411 | 1244 | 414 | 64 | 1128 | 457 | 1118 | 461 | 1124 | 459 |
429.mcf | 64 | 1731 | 337 | 1734 | 337 | 1740 | 335 | 64 | 1131 | 516 | 1128 | 517 | 1138 | 513 |
445.gobmk | 64 | 1024 | 656 | 1022 | 657 | 1027 | 653 | 64 | 863 | 778 | 862 | 779 | 863 | 777 |
456.hmmer | 64 | 349 | 1710 | 351 | 1700 | 349 | 1710 | 64 | 350 | 1710 | 350 | 1710 | 350 | 1710 |
458.sjeng | 64 | 1299 | 596 | 1299 | 596 | 1301 | 595 | 64 | 1154 | 671 | 1152 | 672 | 1152 | 672 |
462.libquantum | 64 | 1333 | 995 | 1334 | 994 | 1337 | 992 | 64 | 1750 | 758 | 1759 | 754 | 1756 | 755 |
464.h264ref | 64 | 1140 | 1240 | 1141 | 1240 | 1142 | 1240 | 64 | 1103 | 1280 | 1109 | 1280 | 1105 | 1280 |
471.omnetpp | 64 | 1575 | 254 | 1574 | 254 | 1572 | 254 | 64 | 1516 | 264 | 1518 | 264 | 1515 | 264 |
473.astar | 64 | 952 | 472 | 940 | 478 | 942 | 477 | 64 | 908 | 495 | 906 | 496 | 908 | 495 |
483.xalancbmk | 64 | 977 | 452 | 985 | 448 | 983 | 449 | 64 | 983 | 449 | 982 | 450 | 980 | 451 |
Processes are bound to CPUs using taskset. limit stacksize unlimited Memory system is in "Non Mirror Mode". The following 2 environment variables were set MALLOC_MMAP_MAX_=0 MALLOC_TRIM_THRESHOLD_=-1 This will cause use of sbrk() calls instead of mmap() calls to get memory from the system.
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_IA64 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
464.h264ref: | -DSPEC_CPU_LP64 |
471.omnetpp: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
-fast -IPF-fp-relaxed -ansi-alias -no-opt-prefetch-initial-values -opt-prefetch-next-iteration -opt-prefetch-issue-excl-hint -unroll-aggressive |
Same as Base Portability Flags