SPEC® CINT2006 Result

Intel Corporation (Test Sponsor: Advanced Micro Devices)

Intel S5000PAL Server Board, Intel Xeon processor
E5345, 2.33 GHz

Hardware
CPU Name:	Intel Xeon E5345
CPU Characteristics:
CPU MHz:	2333
FPU:	Integrated
CPU(s) enabled:	8 cores, 2 chips, 4 cores/chip
CPU(s) orderable:	1,2 chips
Primary Cache:	32 KB I + 32 KB D on chip per core
Secondary Cache:	8 MB I+D on chip per chip, 4 MB shared / 2 cores
L3 Cache:	None
Other Cache:	None
Memory:	16 GB (8x2GB, DDR2-667 FBDIMM CL5 Reg Dual Rank)
Disk Subsystem:	1x250GB SATA, 7200 RPM
Other Hardware:	None

Software
Operating System:	SuSE Linux Enterprise Server 10 SP1 64-bit kernel
Compiler:	gcc, g++ 4.1.2
Auto Parallel:	No
File System:	ext3
System State:	Multi-user, run level 3
Base Pointers:	64-bit
Peak Pointers:	Not Applicable
Other Software:	None

Results Table

Benchmark	Base							Peak
Benchmark	Copies	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio	Copies	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
400.perlbench	8	646	121	644	121	655	119
401.bzip2	8	1082	71.3	1082	71.4	1112	69.4
403.gcc	8	1236	52.1	1240	52.0	1222	52.7
429.mcf	8	2638	27.7	2636	27.7	2636	27.7
445.gobmk	8	838	100	838	100	835	100
456.hmmer	8	1053	70.9	1054	70.8	1052	70.9
458.sjeng	8	892	109	893	108	894	108
462.libquantum	8	5661	29.3	5657	29.3	5660	29.3
464.h264ref	8	1148	154	1145	155	1141	155
471.omnetpp	8	1824	27.4	1822	27.4	1823	27.4
473.astar	8	1263	44.5	1271	44.2	1265	44.4
483.xalancbmk	8	1711	32.3	1707	32.3	1708	32.3

'numactl' was used to bind copies to the cores

 "powersave -f" used to set speed to maximum

 The test system can be assembled using a
 Delta TDPS-600AB 600W 12V power supply.

gcc

g++

-O3 -funroll-loops

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.03.xml.