SPEC® CINT2006 Result

Copyright 2006-2014 Standard Performance Evaluation Corporation

Fujitsu Siemens Computers

PRIMERGY TX300 S3, Intel Xeon processor 5120,
1.86 GHz

CPU2006 license: 22 Test date: May-2007
Test sponsor: Fujitsu Siemens Computers Hardware Availability: Jul-2006
Tested by: Fujitsu Siemens Computers Software Availability: Feb-2007
Benchmark results graph
Hardware
CPU Name: Intel Xeon 5120
CPU Characteristics: 1067 MHz system bus
CPU MHz: 1867
FPU: Integrated
CPU(s) enabled: 4 cores, 2 chips, 2 cores/chip
CPU(s) orderable: 1,2 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 4 MB I+D on chip per chip
L3 Cache: None
Other Cache: None
Memory: 8 GB (8x1 GB DDR2 PC2-5300F, 2 rank, CAS 5-5-5,
with ECC)
Disk Subsystem: SAS (73GB 15400 rpm)
Other Hardware: None
Software
Operating System: 64-Bit SUSE LINUX Enterprise Server 10, Kernel
2.6.16.21-0.8-smp on an x86_64
Compiler: Intel C++ Compiler for IA32/EM64T application,
Version 9.1 - Build 20070215, Package-ID:
l_cc_p_9.1.047
Auto Parallel: No
File System: ext2
System State: Multiuser, Runlevel 3
Base Pointers: 32-bit
Peak Pointers: 32/64-bit
Other Software: Smart Heap Library, Version 8.1

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
400.perlbench 4 779 50.2 784 49.9 778 50.2 4 715 54.7 716 54.6 717 54.5
401.bzip2 4 1229 31.4 1235 31.3 1225 31.5 4 1165 33.1 1165 33.1 1171 33.0
403.gcc 4 809 39.8 807 39.9 803 40.1 4 809 39.8 807 39.9 803 40.1
429.mcf 4 962 37.9 960 38.0 960 38.0 4 981 37.2 979 37.3 981 37.2
445.gobmk 4 858 48.9 861 48.7 865 48.5 4 791 53.1 803 52.2 799 52.5
456.hmmer 4 1194 31.2 1191 31.3 1190 31.4 4 995 37.5 996 37.5 996 37.5
458.sjeng 4 1056 45.8 1055 45.9 1062 45.6 4 975 49.7 970 49.9 974 49.7
462.libquantum 4 3558 23.3 3556 23.3 3557 23.3 4 3512 23.6 3511 23.6 3510 23.6
464.h264ref 4 1168 75.8 1170 75.6 1169 75.7 4 1155 76.6 1155 76.6 1159 76.4
471.omnetpp 4 869 28.8 869 28.8 868 28.8 4 806 31.0 807 31.0 804 31.1
473.astar 4 946 29.7 949 29.6 945 29.7 4 935 30.0 935 30.0 935 30.0
483.xalancbmk 4 536 51.5 538 51.3 539 51.2 4 536 51.5 538 51.3 539 51.2

Operating System Notes

 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
 '/usr/bin/taskset' used to bind processes to CPUs

General Notes


 The system bus runs at 1067 MHz

 All binaries were built with 32-bit Intel compiler except:
 401.bzip2, 456.hmmer and 462.libquantum in peak were built with
 64-bit Intel compiler by changing the path for include and library files.

 BIOS configuration:
 Adjacent Sector Prefetch = Disable

 This result was measured on the PRIMERGY RX300 S3. The PRIMERGY RX300 S3 and
 the PRIMERGY TX300 S3 are electronically equivalent.

 For information about Fujitsu Siemens Computers in your country please see:
 http://www.fujitsu-siemens.com/countries

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Base Portability Flags

400.perlbench:  -DSPEC_CPU_LINUX_X64 
462.libquantum:  -DSPEC_CPU_LINUX 
483.xalancbmk:  -DSPEC_CPU_LINUX 

Base Optimization Flags

C benchmarks:

 -fast 

C++ benchmarks:

 -xP   -O3   -ipo   -no-prec-div   -L/opt/SmartHeap_8_1/lib -lsmartheap 

Peak Compiler Invocation

C benchmarks (except as noted below):

 icc 
401.bzip2:  /opt/intel/cce/9.1.047/bin/icc   -I/opt/intel/cce/9.1.047/include   -L/opt/intel/cce/9.1.047/lib 
456.hmmer:  /opt/intel/cce/9.1.047/bin/icc   -I/opt/intel/cce/9.1.047/include   -L/opt/intel/cce/9.1.047/lib 
462.libquantum:  /opt/intel/cce/9.1.047/bin/icc   -I/opt/intel/cce/9.1.047/include   -L/opt/intel/cce/9.1.047/lib 

C++ benchmarks:

 icpc 

Peak Portability Flags

400.perlbench:  -DSPEC_CPU_LINUX_X64 
401.bzip2:  -DSPEC_CPU_LP64 
456.hmmer:  -DSPEC_CPU_LP64 
462.libquantum:  -DSPEC_CPU_LP64   -DSPEC_CPU_LINUX 
483.xalancbmk:  -DSPEC_CPU_LINUX 

Peak Optimization Flags

C benchmarks:

400.perlbench:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
401.bzip2:  -fast 
403.gcc:  basepeak = yes 
429.mcf:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast   -L/opt/SmartHeap_8_1/lib -lsmartheap 
445.gobmk:  Same as 429.mcf 
456.hmmer:  Same as 400.perlbench 
458.sjeng:  Same as 429.mcf 
462.libquantum:  Same as 400.perlbench 
464.h264ref:  Same as 429.mcf 

C++ benchmarks:

471.omnetpp:  -prof_gen(pass 1)   -prof_use(pass 2)   -xP   -O3   -ipo   -no-prec-div   -L/opt/SmartHeap_8_1/lib -lsmartheap 
473.astar:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast   -L/opt/SmartHeap_8_1/lib -lsmartheap 
483.xalancbmk:  basepeak = yes 

The flags file that was used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.09.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.09.xml.

SPEC and SPECint are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders.

For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright 2006-2014 Standard Performance Evaluation Corporation
Tested with SPEC CPU2006 v1.0.
Report generated on Tue Jul 22 11:43:20 2014 by SPEC CPU2006 HTML formatter v6932.
Originally published on 29 May 2007.