# Invocation command line:
# /cpu2006/bin/runspec -c cpu2006.1.0.ic91.linux64.intel64.sep192006.cfg --rate 8 -T base -o asc fp
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:                                                              
#                                                                                                                
#      Compiler name/version:       Intel Compiler 9.1
#      Operating system version:    Redhat Linux 9.0
#      Hardware:                    Intel Pentium 4 and compatible Intel processors 
#                                   supporting Intel 64 
#                                                                                                                
############################################################################
# SPEC CPU2006 Intel Linux64 Intel64 config file
# Sep 19 2006 Intel Compiler 9.1 for Linux64 Intel64
############################################################################
action      = validate
tune        = base
ext         = cpu2006.1.0.ic91.linux64.intel64.sep192006
PATHSEP     = /
check_md5=1
reportable=1

#
# These are listed as benchmark-tuning-extension-machine
#
default=default=default=default:
CC  = icc
CXX = icpc
FC  = ifort
OBJ = .o
################################################################
#
# portability & libraries
#

default:
PORTABILITY= -DSPEC_CPU_LP64

400.perlbench=default:
CPORTABILITY  = -DSPEC_CPU_LINUX_X64

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

435.gromacs=default:
LDPORTABILITY=     -nofor_main

436.cactusADM=default:
LDPORTABILITY=      -nofor_main

454.calculix=default:
LDPORTABILITY=     -nofor_main

462.libquantum=default:
CPORTABILITY= -DSPEC_CPU_LINUX

481.wrf=default:
CPORTABILITY=    -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX

# Tuning Flags
################################################################

#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same 
# flags are used in the same order for all benchmarks of a given language

default=base=default=default:
OPTIMIZE= -fast

sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable

default=peak=default=default:
OPTIMIZE= -fast -auto_ilp32
sw_peak_ptrsize = Not Applicable
PASS1_CFLAGS =   -prof_gen
PASS2_CFLAGS =   -prof_use
PASS1_FFLAGS =   -prof_gen
PASS2_FFLAGS =   -prof_use
PASS1_CXXFLAGS = -prof_gen
PASS2_CXXFLAGS = -prof_use
PASS1_LDFLAGS =  -prof_gen
PASS2_LDFLAGS =  -prof_use

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 11
test_sponsor     = IBM Corporation
hw_avail         = Apr-2007
sw_avail         = Nov-2006
test_date        = Apr-2007
tester           = IBM Corporation
hw_cpu_name      = Intel Xeon X5355
hw_cpu_char      = 1333MHz system bus
hw_cpu_mhz       = 2667
hw_disk          = 1 x 74 GB SAS, 10000 RPM
hw_fpu           = Integrated
hw_memory        = 8 GB (8 x 1GB DDR2-5300F ECC)
hw_model         = IBM BladeCenter HS21 (Intel Xeon X5355)
hw_ncpuorder     = 1,2 chips
hw_ncores        = 8
hw_nchips        = 2
hw_ncoresperchip = 4
hw_nthreadspercore = 1
hw_other         = Memory and I/O Expansion Unit (P/N 42C1600)
sw_auto_parallel = No
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache        = None
hw_ocache        = None
hw_vendor        = IBM Corporation
prepared_by      = Matt Eckl
sw_file          = ext2
sw_os000         = SuSE Linux Enterprise Server 10 EM64T
sw_os001 = kernel 2.6.16.21-0.8-smp
sw_state         = Multi-user run level 3
sw_other         = None

int=default=default=default:
sw_compiler001   = Intel C++ Compiler for Linux64 EM64T version 9.1
sw_compiler002   = Build 20060818 Package ID: l_cc_c_9.1.043 
sw_auto_parallel = No

fp=default=default=default:
sw_compiler000   = Intel C++ Compiler for Intel EM64T-based
sw_compiler001   = applications, Version 9.1
sw_compiler002   = Package ID l_cc_c_9.1.045 Build no 20061101
sw_compiler003   = Intel Fortran Compiler for Intel EM64T-based
sw_compiler004 = applications, Version 9.1
sw_compiler005 = Package ID l_fc_c_9.1.040 Build no 20061101
sw_auto_parallel = No




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000= http://www.spec.org/cpu2006/flags/ibm-ic91-flags.xml
notes_plat_000="ulimit -s unlimited" set