# Invocation command line:
# /cpu2006/bin/runspec -c fsc-path30-amd64-ser-20070328 -T all --input ref -n 3 --rate 2 -o all all
# output_root was not used for this run
############################################################################
# AMD64 (64-bit) Linux/SuSE Pathscale v3.0 config file 
# Config file for CPU2006 Version 1.0
# March 2007
#####################################################################

ignore_errors = yes
tune          = base
ext           = fsc-ps30-amd64-ser-20070328
output_format = asc,html
# teeout        = yes
teerunout     = yes
mean_anyway   = yes
reportable = 1

#####################################################################
# Compiler
#####################################################################

sw_os=SLES 10 for AMD64/EM64T
sw_compiler000 = QLogic PathScale Compiler Suite,
sw_compiler001 = - Release 3.0
sw_avail       = Mar-2007

flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.10.xml

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

submit=MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))` ; /usr/bin/taskset \$MYMASK $command

#######################################################################
# System information                                                  #
# If some remarks about BIOS or Firmware are needed, place them here. #
####################################################################### 

default=default=default=default:
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005= '/usr/bin/taskset' has been used to bind processes to CPUs
notes_000=
notes_005= BIOS settings:
notes_010= Node Interleave = disabled

###################################
# About Fujitsu Siemens Computers #
###################################

default=default=default=default:
notes_015=
notes_020= For information about Fujitsu Siemens Computers in your country please see:
notes_025= http://www.fujitsu-siemens.com/countries

#####################################
# Description Hardware and Software #
#####################################

default=default=default=default:
hw_vendor          = Fujitsu Siemens Computers
hw_model           = PRIMERGY RX330 S1, AMD Opteron 2210, 1.8 GHz
hw_cpu_name        = AMD Opteron 2210
hw_cpu_char        = 2210
hw_cpu_mhz         = 1800
hw_fpu             = Integrated
#
hw_nchips          = 1
hw_ncores          = 2
hw_ncoresperchip   = 2
hw_nthreadspercore = 1
#
hw_ncpuorder       = 1,2 chips
hw_pcache          = 64 KB I + 64 KB D on chip per core
hw_scache          = 1 MB I+D on chip per core
hw_tcache          = None
hw_ocache          = None
hw_memory000       = 32 GB (8x4 GB DDR2 PC2-5300P, 2 rank, CAS 5-5-5,
hw_memory001 = with ECC)
hw_disk            = SAS (36GB 15.4 krpm)
hw_other           = None

sw_file            = ReiserFS
sw_state           = Multi-user run level 3

license_num        = 22
test_sponsor       = Fujitsu Siemens Computers
tester             = Fujitsu Siemens Computers
test_date          = Apr-2007
hw_avail           = May-2007
prepared_by        = Fujitsu Siemens Computers
config             = fsc-path30-amd64-ser-20070328
# ---- End inclusion of '/cpu2006/config/SUT.inc'

default=default=default:
#####################################################################
# Compiler selection
#
#
CC           = pathcc
CXX          = pathCC
FC           = pathf95

SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib

int=default=default=default:
sw_auto_parallel = No
sw_other       = SmartHeap 8.1

fp=default=default=default:
sw_auto_parallel = No
sw_other       = None

#  Parallel make: Use 4 processors for build
default=default=default=default:
makeflags = -j4
EXTRA_LDFLAGS = -IPA:max_jobs=4

#####################################################################
# Portability for default 64-bit code generation
# Deselect 64-bit Portability for C++ in INT
#####################################################################

default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

471.omnetpp,473.astar,483.xalancbmk=default=default=default:
PORTABILITY =

#####################################################################
# INT Portability
#####################################################################

400.perlbench=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

462.libquantum=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX

483.xalancbmk=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX

#################################################################
#                                                               #
#          SPECint Tuning & Notes                               #
#                                                               #
#################################################################

int=base=default=default:
sw_base_ptrsize = 32/64-bit

int=base=default=default:
COPTIMIZE    = -Ofast -OPT:malloc_alg=1
CXXOPTIMIZE  = -Ofast -m32
EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap

#####################################################################
# INT Peak Tuning
#####################################################################

int=peak=default=default:
sw_peak_ptrsize = 32/64-bit

# Define default:  C    -Ofast -OPT:malloc_alg=1 +FDO
#                  C++  -Ofast -m32 +FDO -lsmartheap
int=peak=default:
COPTIMIZE    = -Ofast -OPT:malloc_alg=1
CXXOPTIMIZE  = -Ofast -m32
EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap
PASS1_CFLAGS  = -fb_create fbdata 
PASS1_CXXFLAGS  = -fb_create fbdata 
PASS1_LDFLAGS = -fb_create fbdata
PASS2_CFLAGS  = -fb_opt fbdata
PASS2_CXXFLAGS  = -fb_opt fbdata
PASS2_LDFLAGS = -fb_opt fbdata

400.perlbench=peak=default:
COPTIMIZE=-Ofast -LNO:opt=0

401.bzip2=peak=default:
COPTIMIZE=-O3 -LNO:ou_prod_max=10 -OPT:Ofast:alias=disjoint
feedback=0

403.gcc=peak=default:
PORTABILITY =
COPTIMIZE=-m32 -O3 -OPT:Ofast

429.mcf=peak=default:
PORTABILITY =
COPTIMIZE=-m32 -O3 -ipa
feedback=0
EXTRA_CLIBS = -L$(SMARTHEAP_DIR) -lsmartheap

445.gobmk=peak=default:
COPTIMIZE=-O3 -OPT:alias=disjoint -LNO:simd=0:minvariant=off -WOPT:retype_expr=on

456.hmmer=peak=default:
COPTIMIZE=-O2 -OPT:alias=disjoint:malloc_alg=1 -CG:cflow=0
feedback=0

458.sjeng=peak=default:
COPTIMIZE=-O3 -IPA:plimit=50000 -IPA:pu_reorder=2

462.libquantum=peak=default:
COPTIMIZE=-O3 -ipa -CG:local_fwd_sched=on -IPA:space=1000
feedback=0

464.h264ref=peak=default:
COPTIMIZE=-O3 -IPA:plimit=20000 -OPT:alias=disjoint -LNO:prefetch=0

471.omnetpp=peak=default:
CXXOPTIMIZE= -Ofast -CG:gcm=off -m32
feedback=0

473.astar=peak=default:
basepeak=true

483.xalancbmk=peak=default:
CXXOPTIMIZE=-Ofast -m32 -OPT:unroll_times_max=8
feedback=0

#####################################################################
# FP Portability
#####################################################################

436.cactusADM=default=default:
FPORTABILITY=  -fno-second-underscore		   

481.wrf=default=default:
FPORTABILITY= -fno-second-underscore
CPORTABILITY= -DSPEC_CPU_LINUX

#################################################################
#                                                               #
#                        SPECfp Tuning                          #
#                                                               #
#################################################################

fp=base=default=default:
sw_base_ptrsize = 64-bit

fp=base=default=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast
FOPTIMIZE    = -Ofast -OPT:malloc_alg=1

#####################################################################
# FP Peak Tuning
#####################################################################

fp=peak=default=default:
sw_peak_ptrsize = 32/64-bit

# Define default: -Ofast +FDO
fp=peak=default=default:
COPTIMIZE      = -Ofast
CXXOPTIMIZE    = -Ofast
FOPTIMIZE      = -Ofast -OPT:malloc_alg=1
PASS1_CFLAGS   = -fb_create fbdata
PASS2_CFLAGS   = -fb_opt fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS1_FFLAGS   = -fb_create fbdata
PASS2_FFLAGS   = -fb_opt fbdata
PASS1_LDFLAGS  = -fb_create fbdata
PASS2_LDFLAGS  = -fb_opt fbdata

410.bwaves=peak=default:
FOPTIMIZE=-O3 -OPT:Ofast:IEEE_arith=3 -LNO:blocking=off:ignore_feedback=off

416.gamess=peak=default:
FOPTIMIZE=-O2 -OPT:Ofast:ro=3:unroll_size=256

433.milc=peak=default:
COPTIMIZE=-Ofast -CG:cflow=off -LNO:prefetch=1 -OPT:malloc_alg=1
feedback=0

434.zeusmp=peak=default:
FOPTIMIZE=-Ofast -CG:local_fwd_sched=on -LNO:blocking=off:interchange=off:fu=10:full_unroll_outer=on
feedback=0

435.gromacs=peak=default:
FOPTIMIZE=-O3 -OPT:rsqrt=2:ro=3
COPTIMIZE=-O3 -OPT:rsqrt=2:ro=3
feedback=0

436.cactusADM=peak=default:
COPTIMIZE=-O3 -LNO:prefetch=3:prefetch_ahead=5:ou_prod_max=10:full_unroll=5 -ipa
FOPTIMIZE=-O3 -LNO:prefetch=3:prefetch_ahead=5:ou_prod_max=10:full_unroll=5 -ipa

437.leslie3d=peak=default:
basepeak=true

444.namd=peak=default:
CXXOPTIMIZE=-Ofast -fno-exceptions

447.dealII=peak=default:
# Needed to avoid -DSPEC_CPU_LP64
PORTABILITY =
CXXOPTIMIZE=-Ofast -static -INLINE:aggressive=on -OPT:malloc_alg=1 -m32 -fno-exceptions
feedback=0

450.soplex=peak=default:
CXXOPTIMIZE=-m32 -O3 -OPT:IEEE_arith=3 -CG:load_exe=0:movnti=1 -LNO:minvariant=off:prefetch=1 -fno-exceptions
# Needed to avoid -DSPEC_CPU_LP64 
PORTABILITY =

453.povray=peak=default:
CXXOPTIMIZE=-Ofast -fno-fast-math

454.calculix=peak=default:
FOPTIMIZE=-Ofast -LNO:simd=0 -WOPT:mem_opnds=on
COPTIMIZE=$(FOPTIMIZE)
feedback=0

459.GemsFDTD=peak=default:
FOPTIMIZE=-Ofast -LNO:fission=2:prefetch=0
feedback=0

465.tonto=peak=default:
basepeak=true

470.lbm=peak=default:
basepeak=true

481.wrf=peak=default:
basepeak=true

482.sphinx3=peak=default:
COPTIMIZE=-O3 -OPT:Ofast -WOPT:aggstr=0 -m32